Quotes pricing

Payment terms for domestic plumbing customers

Payment terms by job size for domestic plumbing and heating work, how to state them before you start, the wording to use and a polite chasing routine.

Ava research teamPublished 6 min read

On this page
  1. Why domestic terms need to be explicit
  2. Late payment is a growing problem
  3. Terms by job size
  4. State the terms three times
  5. Wording that works
  6. Make paying on the day the easy option
  7. Landlords and agents are different
  8. When the customer disputes the invoice
  9. Winter and customers under pressure
  10. A polite chasing routine
  11. Example: terms that cut debtor days
  12. Frequently asked questions
  13. References

Key takeaways

  • Set payment terms by job size: on completion for call-outs and services, stages for anything that runs over several days.
  • State the terms before the job starts, at booking, on the quote and in the confirmation, never for the first time on the invoice.
  • Late payment is common: 63% of UK SME employers that gave trade credit said it was a problem in 2025[1].
  • Landlords trading as businesses and letting agents are business customers, so statutory late payment interest can apply[2].
  • A short, polite chasing routine collects most overdue domestic invoices without damaging the relationship.

Why domestic terms need to be explicit

Most homeowners have never been asked about payment terms by a tradesperson. They assume they will pay ‘when it's done’ and that ‘done’ means whatever they think it means. That assumption is fine for a tap washer and costly for a boiler install, where the customer may wait for the first cold evening to check the heating before they pay.

Clear terms remove the guesswork. They tell the customer when payment is due, how to pay and what happens if they do not. Stated early and politely, they also signal that you run a proper business, which customers tend to respect.

Late payment is a growing problem

Among UK small and medium-sized employers that give trade credit, 63% said late payment was a problem in 2025, six percentage points more than in 2024[1]. In construction, 45% of SME employers named it a major obstacle[3]. Domestic customers are not the main cause, but for a sole trader every unpaid week on a domestic invoice comes straight out of the money for wages, fuel and the next job's materials.

UK SME employers giving trade credit for whom late payment was a problem2024 figure derived from the 6 percentage point rise reported for 2025.
UK SME employers giving trade credit for whom late payment was a problemComparison. 2024: 57%; 2025: 63%.57%20242024: 57%63%20252025: 63%UK SME employers giving trade credit for whom late payment was a problemComparison. 2024: 57%; 2025: 63%.57%20242024: 57%63%20252025: 63%

Source: Department for Business and Trade (GOV.UK), 2025[1]

Show the data
ItemValue
202457%
202563%

Terms by job size

Suggested payment terms by job type for domestic plumbing and heating work.
Job typeSuggested termsHow to collect
Emergency call-out and small repairPayment on completion, before leavingCard reader or payment link on the day
Annual service or gas safety recordPayment on completion, or at booking for plan customersCard or payment link; record issued once paid
Day-long repair or upgradePayment on completionInvoice sent the same day, due within a few days
Boiler replacementDeposit for the boiler, balance on commissioningBank transfer or card on handover
Bathroom and multi-day workDeposit, then stage paymentsStage invoices with photos
Landlord or agency workAccount terms agreed in writingInvoice with job reference and approval number

The common thread is simple: the smaller the job, the sooner you are paid. For most work under a day, there is no reason to offer credit at all. Customers rarely object to paying on the day if they knew in advance that they would.

State the terms three times

  1. At booking

    Whoever takes the call says how payment works: ‘Payment's due when the engineer finishes, by card or bank transfer.’ For an emergency, say the call-out charge and what it covers.

  2. On the quote

    Payment terms appear on the front page, next to the price, not in small print on the back.

  3. In the confirmation

    The booking confirmation by text or email repeats the terms and how to pay.

  4. On the invoice

    The invoice states the due date, the payment methods and the job reference. By now, nothing on it should surprise the customer.

Telling the customer three times sounds excessive, but each message reaches a different moment: the decision to book, the decision to accept, and the day of the work.

Wording that works

  • Repairs and servicing: ‘Payment is due on completion of the work. We accept card and bank transfer. Your service record will be sent once payment is received.’
  • Boiler installs: ‘A deposit is due when you book your installation date and is used to order your boiler. The balance is due on the day the boiler is commissioned and the system is handed over.’
  • Invoices: ‘Payment due within three days of the invoice date. Please quote the invoice number as your payment reference.’
  • Late payment: ‘If payment is not received by the due date, we will contact you to arrange it. We may add reasonable costs of recovery if an invoice remains unpaid after a written reminder.’

Keep the wording plain and fair. In consumer contracts, terms that are hidden or one-sided can be challenged, and a customer who feels ambushed by a charge is much more likely to dispute the whole bill. Where no price has been agreed, the customer only has to pay a reasonable one[4], so agree the price or the way it is worked out before you start.

Make paying on the day the easy option

  • Carry a card reader or send a payment link from your phone before you leave.
  • Show your bank details on every invoice, and tell customers you will never change them by email.
  • Send the invoice the same day; a next-week invoice often becomes a next-month payment.
  • Thank the customer when payment arrives. It costs nothing and improves the chance of a review.

Fast invoicing also helps your own records. Sole traders with qualifying income above the Making Tax Digital threshold had to start using Making Tax Digital for Income Tax from April 2026, and the threshold falls in 2027 and 2028[5]. Invoices raised on the day go straight into those records.

Landlords and agents are different

A landlord who trades as a company or a letting agent acting for landlords is a business customer. The rules that protect consumers do not apply in the same way, and you can claim statutory interest of 8% plus the Bank of England base rate on late business-to-business payments[2]. Agree account terms in writing: who approves work, the invoice address, the payment period and the purchase order process.

Individual landlords letting a single property are a grey area. Treat them with the same clarity as any domestic customer and agree terms in writing before the first job.

When the customer disputes the invoice

Sometimes a customer holds back payment because they are unhappy with the work, not because they cannot pay. Treat that as a complaint first and a debt second.

  1. Ask exactly what is wrong and, if possible, go back to look. Many disputes are about a snag that takes twenty minutes to fix.
  2. Separate the disputed part from the rest. If the customer is unhappy with the boxing-in but not the boiler, invoice the undisputed amount and agree what will happen about the rest.
  3. Put your proposal in writing: what you will put right, by when, and when the balance becomes due.
  4. Keep photos and commissioning records from the job; they settle most arguments about what was done.

Every service must be carried out with reasonable care and skill[6]. If the complaint is justified, fixing it quickly is cheaper than any dispute. If it is not, a calm written explanation backed by records usually ends it.

Winter and customers under pressure

Heating breakdowns cluster in the coldest weeks, and some of the customers who call then are the least able to pay on the day. Cold Weather Payments of £25 are made to eligible people for each seven-day period of very cold weather between November and March[7], a reminder that a sudden repair bill can hit hard. Decide your approach before the season starts: whether you will offer a short payment plan for essential repairs, who can approve it, and how it is recorded. A clear policy lets you help without making it up at the door, and keeps the decision fair between customers.

A polite chasing routine

  1. Due date plus one day: a friendly reminder with the invoice attached and a payment link.
  2. Plus seven days: a phone call. Ask whether anything is wrong with the work. If something is, fix it; if not, agree a payment date.
  3. Plus fourteen days: a written reminder stating the amount, the due date, and that you will consider recovery action if it is not paid by a set date.
  4. Plus twenty-eight days: a formal letter before action, then consider the small claims process.

Most domestic invoices are paid after the first reminder. If a customer is in genuine financial difficulty, a short payment plan in writing usually recovers more than a court claim and protects your reputation locally.

Example: terms that cut debtor days

Example (fictional): a sole trader in Sheffield used to invoice at the end of each week and was often owed for a dozen jobs at a time. She changed three things: payment on completion for all jobs under a day, stated when booking; a payment link sent before leaving each job; and a reminder the morning after any unpaid invoice. Within two months, most jobs were paid on the day and she spent one evening a month on chasing instead of one a week.

The best payment terms are the ones the customer heard before you arrived.

Frequently asked questions

What payment terms should a plumber give domestic customers?

Payment on completion for call-outs, repairs and servicing; a deposit and balance on commissioning for boiler installs; and stage payments for bathrooms and multi-day work.

Can I charge interest on a late domestic invoice?

Statutory late payment interest applies to business customers[2]. For homeowners, any charge must be in your agreed terms and fair.

When should I tell the customer about payment terms?

At booking, on the quote and in the confirmation. The invoice should repeat them, not introduce them.

What if a customer cannot pay in full?

Agree a short payment plan in writing. It usually recovers more than legal action and keeps your local reputation intact.

References

  1. Department for Business and Trade (GOV.UK) (2025). Longitudinal Small Business Survey 2025: SME employers (businesses with 1 to 249 employees) (opens in a new tab) ↑

  2. GOV.UK (2026). Late commercial payments: charging interest (opens in a new tab) ↑

  3. Department for Business and Trade (GOV.UK) (2025). Longitudinal Small Business Survey 2025: SME employers (businesses with 1 to 249 employees) (opens in a new tab) ↑

  4. legislation.gov.uk (The National Archives) (2015). Consumer Rights Act 2015, section 51 (opens in a new tab) ↑

  5. GOV.UK (2026). Check if you're eligible for Making Tax Digital for Income Tax (opens in a new tab) ↑

  6. legislation.gov.uk (The National Archives) (2015). Consumer Rights Act 2015, section 49 (opens in a new tab) ↑

  7. GOV.UK (2026). Cold Weather Payment (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo