Metrics growth

London vs regional rates: pricing by location

Regional pay data for employee plumbers, the real cost differences between London, cities and rural areas, and how to set area-based rates.

Ava research teamPublished 7 min read

On this page
  1. What the pay data says
  2. Where costs really differ by area
  3. Build rates from cost per billable hour
  4. Example: one firm, three zones
  5. Market structure by nation and region
  6. Explaining area pricing to customers
  7. Paying engineers who work across areas
  8. Rural and off-gas work
  9. When to review area rates
  10. Frequently asked questions
  11. References

Key takeaways

  • Employee plumbers' median hourly pay in London was £20.73 in 2026, against £18.82 across the UK[1][2], a gap of about 10%.
  • Pay is only part of the difference. Travel time, parking, access and job size change the cost of each billable hour far more between areas.
  • Build area rates from cost per billable hour in each zone, not from a guessed London premium.
  • Publish zone or travel charges up front; where no price is agreed, a consumer only has to pay a reasonable one[3].
  • Rural areas have their own cost profile: longer drives, oil and LPG systems and fewer jobs per day.

What the pay data says

Customers and new firms often assume London plumbers earn far more than everyone else. Official earnings data show a smaller gap than that. In the 2026 Annual Survey of Hours and Earnings, median gross hourly pay for employee plumbers and heating and ventilating installers ranged from £17.25 in the East of England to £20.73 in London[1]. The UK median for the same occupation was £18.82[2].

Median gross hourly pay of employee plumbers by region, 2026Employee jobs by place of work, provisional; regional samples are small
Median gross hourly pay of employee plumbers by region, 2026Bar chart. London: £20.73; West Midlands: £20.35; South West: £19.53; Scotland: £19.43; North East: £18.86; South East: £18.7; East Midlands: £18.52; North West: £18.4; Wales: £18.18; Yorkshire and The Humber: £17.89; East: £17.25.LondonLondon: £20.73£20.73West MidlandsWest Midlands: £20.35£20.35South WestSouth West: £19.53£19.53ScotlandScotland: £19.43£19.43North EastNorth East: £18.86£18.86South EastSouth East: £18.7£18.7East MidlandsEast Midlands: £18.52£18.52North WestNorth West: £18.4£18.4WalesWales: £18.18£18.18Yorkshire and The HumberYorkshire and The Humber: £17.89£17.89EastEast: £17.25£17.25Median gross hourly pay of employee plumbers by region, 2026Bar chart. London: £20.73; West Midlands: £20.35; South West: £19.53; Scotland: £19.43; North East: £18.86; South East: £18.7; East Midlands: £18.52; North West: £18.4; Wales: £18.18; Yorkshire and The Humber: £17.89; East: £17.25.LondonLondon: £20.73£20.73West MidlandsWest Midlands: £20.35£20.35South WestSouth West: £19.53£19.53ScotlandScotland: £19.43£19.43North EastNorth East: £18.86£18.86South EastSouth East: £18.7£18.7East MidlandsEast Midlands: £18.52£18.52North WestNorth West: £18.4£18.4WalesWales: £18.18£18.18Yorkshire and The HumberYorkshire and The Humber: £17.89£17.89EastEast: £17.25£17.25

Source: Office for National Statistics, 2026[1]

Show the data
ItemValue
London£20.73
West Midlands£20.35
South West£19.53
Scotland£19.43
North East£18.86
South East£18.7
East Midlands£18.52
North West£18.4
Wales£18.18
Yorkshire and The Humber£17.89
East£17.25

Treat the regional figures with care. They come from a survey, the sample for each region is small, and ONS suppresses the job counts for several regions because the estimates are less precise. Some regions moved sharply from the year before, with the West Midlands median up 20%[1]. Use the figures as a rough guide to what employed engineers cost in each area, not as a precise ranking.

The data also cover employees only. Around 48% of plumbers and heating installers are self-employed[4], and their charge-out rates are not in these tables. What the figures do show is that the cost of employing an engineer in London is higher, but not dramatically so. The bigger differences in what a job costs to deliver lie elsewhere.

Where costs really differ by area

How the cost of a billable hour changes by area type
Cost factorCentral and inner LondonOther cities and suburbsRural areas
Travel between jobsShort distances, slow trafficModerateLong distances, fewer jobs a day
Parking and accessPaid bays, permits, loading limits, stairs and concierge desksSome permit zonesUsually easy
Road chargesCongestion and emissions charges where they applyClean air zones in some citiesRare
Typical systemsCombis in flats, communal and older systemsMixedMore oil, LPG and older regular systems
Jobs per engineer dayOften fewer than the distance suggestsHighestLowest
Merchant accessMany branches, slow to reachGoodFewer branches, longer trips

The result is that a London engineer may spend as long getting to, parking for and accessing a job as a rural engineer spends driving to one, for different reasons. A suburban firm working a tight area often has the lowest cost per billable hour of all.

Build rates from cost per billable hour

  1. Define your zones

    Draw two to four zones around your base by drive time, not distance: a core area, a wider area and an outer area. In London, the core may be a handful of postcodes.

  2. Measure time per job in each zone

    From job records or two weeks of timings, find average travel, parking and access time per job in each zone.

  3. Add zone-specific costs

    Parking, permits, road charges and extra fuel. Note which you can pass on as a separate line and which belong in the rate.

  4. Calculate cost per billable hour by zone

    Your loaded engineer cost per hour, divided by the share of time that is billable in that zone, plus the zone-specific costs per job.

  5. Set prices to cover it

    Either a different hourly or call-out rate per zone, or one rate with a travel or zone charge added outside the core area.

  6. Publish and review

    Put the zone map and charges on your website and phone script, and review them each year.

Our guide to revenue per engineer explains how to find the billable share of an engineer's paid hours; the zone exercise is the same method, split by area.

Example: one firm, three zones

Example: a fictional firm based in Croydon works south London and north Surrey. Its loaded engineer cost is £36 per paid hour. In its core zone, engineers are billable 60% of the time, so each billable hour costs £60. In inner London, parking and access cut the billable share to 48%, raising the cost to £75 per billable hour, plus an average £12 per job in parking. In rural Surrey, long drives bring the billable share to 50%, or £72 per billable hour.

Example pricing: the firm keeps one published hourly rate that covers the core zone with a healthy margin, adds a fixed inner-London charge that covers parking and the extra access time, and adds a travel charge for the outer rural zone. Customers see the full price when they book, and the firm stops losing money on jobs that looked profitable on the rate card.

Market structure by nation and region

Competition varies by area as well as cost. In 2026 there were 42,130 plumbing and heating business sites in England, 3,260 in Scotland, 1,900 in Wales and 1,205 in Northern Ireland[5]. Grant-funded heat pump work is also unevenly spread: the South East had the most Boiler Upgrade Scheme redemptions, 19,069 or 20% of the total, followed by the South West with 17,168[6]. Firms in areas with heavy heat pump uptake face a different mix of work and competitors from those in mainly gas areas.

Check your local competition directly as well: how many firms advertise in your postcodes, what they publish about call-out charges and response times, and how their reviews compare. The market size guide gives the national picture.

Explaining area pricing to customers

Most customers accept a travel or parking charge if it is explained before they book. Problems come from surprises on the invoice. Where no price has been agreed for a service, the Consumer Rights Act 2015 says the consumer must pay a reasonable price[3], which is an argument you do not want to have after the work is done.

  1. Ask for the postcode early in every call and confirm which zone it is in.
  2. State any zone, travel, parking or congestion charge before the booking is confirmed, and repeat it in the confirmation message.
  3. Use the same wording on the website, in quotes and on the phone.
  4. If a customer offers a parking space or permit, take it off the charge.
  5. For landlords and agents with properties across zones, put zone charges in the rate card.

For callers who ask for a price before booking, see handling the price question on the phone.

Paying engineers who work across areas

Area pricing raises a staffing question: should engineers who work the expensive zones be paid more? Most firms keep one pay scale and handle the difference through scheduling and expenses, because a zone allowance quickly becomes a source of argument about who gets which jobs.

  • Reimburse parking and road charges at cost, with receipts, rather than building them into pay.
  • Rotate the hardest zones fairly, or let engineers who prefer city work specialise in it.
  • Count travel from the first job, or from home, consistently and in writing in the contract.
  • If you recruit in London, expect to compete with firms paying above the regional median, and with self-employed work that pays day rates.
  • Review overtime patterns by zone; long days in slow-traffic areas are a retention risk.

Whatever you choose, keep the pricing and the pay logic separate. Customers pay for the cost of delivering the job in their area; engineers are paid for their skill and time, wherever they are sent.

Rural and off-gas work

Rural firms face long distances and a different system mix, with more oil, LPG and older regular boilers. Fewer jobs per day mean a higher cost per billable hour even with no parking or road charges. The same zone method applies: measure the real time per job, then decide whether to charge travel, cluster jobs on set days by area, or narrow the area you cover.

Clustering is often the better answer. A rural firm that books routine work into area days, for example one valley on Tuesdays and another on Thursdays, can bring its cost per job down without raising prices, while keeping emergency cover for the whole patch.

When to review area rates

  • Every year, alongside the general price review.
  • When road or parking charges change in your area.
  • When you add a van or an engineer based somewhere new.
  • When a zone's jobs are consistently less profitable than the rest, which shows up in recurring revenue and contract work first.
  • When a call-handling or booking change lets you cluster work more tightly.

Frequently asked questions

How much more do London plumbers earn?

Among employees, median hourly pay in London was £20.73 in 2026, about 10% above the UK median of £18.82 for the same occupation. Self-employed charge-out rates are not covered by these figures.

Should we charge more for jobs in central London?

Charge what the work costs to deliver. Parking, access and slow travel usually lower the billable share of an engineer's day, so a zone or parking charge is often fairer than a higher rate everywhere.

Is it legal to add a travel or parking charge?

Yes, if it is agreed before the work. Tell the customer when they book and repeat it in writing; surprise charges on the invoice are what cause disputes.

How should a rural firm price long journeys?

Measure the real time per job by area, then either add a travel charge for outer areas or cluster routine work into area days to bring the cost per job down.

References

  1. Office for National Statistics (2026). Annual Survey of Hours and Earnings 2026 provisional, Table 15 (work region by occupation, SOC 2020), hourly pay gross (opens in a new tab) ↑

  2. Office for National Statistics (2026). Annual Survey of Hours and Earnings 2026 provisional, Table 14 (occupation by 4-digit SOC 2020) (opens in a new tab) ↑

  3. legislation.gov.uk (The National Archives) (2015). Consumer Rights Act 2015, section 51 (opens in a new tab) ↑

  4. Office for National Statistics (Nomis) (2026). Annual Population Survey - regional - occupation (SOC2020) by sex by employment type, via Nomis (opens in a new tab) ↑

  5. Office for National Statistics (Nomis) (2026). UK Business Counts - local units by industry and employment size band (SIC 2007 class 43.22), via Nomis (opens in a new tab) ↑

  6. Department for Energy Security and Net Zero (2026). Boiler Upgrade Scheme (BUS) monthly statistics: England and Wales, September 2026 (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo