Key takeaways
- Most plumbing firms that process customer data electronically must pay the data protection fee unless all their processing is exempt.
- Since 17 February 2025 the fee has been £52 for tier 1, £78 for tier 2 and £3,763 for tier 3, with £5 off for direct debit[1].
- Tier 1 covers organisations with turnover up to £632,000 or no more than 10 staff[2], which takes in the great majority of plumbing firms.
- Paying the fee is not the same as complying with data protection law. It is the cheapest part of it.
The short answer
If your plumbing or heating business keeps customer details on a phone, computer or job management system, you probably need to pay the data protection fee to the Information Commissioner each year. A narrow group of firms is exempt because everything they do with personal data falls within a few basic purposes. Most firms that take bookings, keep job records, record calls or use vehicle cameras will not fit that group.
The fee comes from the Data Protection (Charges and Information) Regulations 2018. It funds the regulator, and paying it puts your business on the public register of fee payers. It is not a licence and it is not a certificate of compliance, but not paying when you should is a breach in its own right.
The three tiers and what they cost
The amounts were raised on 17 February 2025 and have not changed since[1]. Your tier depends on staff numbers and annual turnover, using bands set out in regulation 2[2].
| Tier | Who it is for | Fee | Fee by direct debit |
|---|---|---|---|
| Tier 1: micro | Turnover up to £632,000, or no more than 10 staff | £52 | £47 |
| Tier 2: small and medium | Turnover up to £36 million, or no more than 250 staff | £78 | £73 |
| Tier 3: large | Above both tier 2 limits | £3,763 | £3,758 |
The test works in your favour. You fall into the lower tier if you meet either the staff limit or the turnover limit. A heating firm with 14 staff but turnover under the tier 1 limit is still tier 1. Use the figures for your last financial year, and check the regulator's guidance on how to count part-time staff if you are near the limit.
Where plumbing firms fall
Nearly every plumbing business is in tier 1. About 95% of registered plumbing, heating and air-conditioning enterprises have fewer than 10 employees[3]. By turnover, the biggest group, 19,630 enterprises or about 41%, turned over £100,000 to £249,000 in 2026, and another 13,030 turned over £50,000 to £99,000[4][5].
So the realistic question for most owners is not which tier, but whether they are exempt or must pay the tier 1 fee. Growing firms should check each year: crossing 10 staff does not move you up if your turnover remains under the tier 1 limit, but crossing both limits does.
Who is exempt, and why most plumbers are not
The regulations require controllers to pay unless all of the personal data processing they do is exempt[2]. In practice, organisations are usually exempt only if they process data for a short list of core purposes, such as staff administration, advertising and marketing their own business, and keeping accounts and records, and do nothing else with it. Not-for-profit bodies and processing done only for personal or household reasons can also be exempt.
- Using CCTV or vehicle cameras to prevent or detect crime usually takes you out of the exemption.
- Recording customer calls, or using a service that records and transcribes them, goes beyond basic record keeping.
- Holding detailed job records such as photos inside homes, access notes and key safe codes for operational use points towards paying.
- Processing data for landlords or letting agents as part of compliance work, such as gas safety records, is part of your service and should be considered.
- If you are unsure, the regulator's online self-assessment asks a few questions and tells you whether you need to pay.
Most firms that use dash cams, record calls or run a job management app should assume they need to pay, and confirm it with the self-assessment. At tier 1 the fee is small next to the risk of getting it wrong.
How to pay and keep it current
Check your tier
Note your staff numbers and turnover for your last financial year and compare them with the tier limits.
Register online
Use the regulator's online form. You will need your business name, address, a contact person and your tier details. Sole traders register in their own name with a trading name.
Pay by direct debit
It saves £5 a year[1] and means the renewal happens automatically, so you cannot miss it.
Keep your entry up to date
Change of address, change of trading name, incorporating as a limited company or a new data protection contact all need updating. A new company is a new controller and needs its own registration.
Diary the renewal
If you do not use direct debit, set a reminder a month before the anniversary. The regulator sends reminders but they can go to an old email address.
Changes that affect your registration
A registration made when you started trading can drift out of date as the business changes. These are the moments to check it again.
- Moving from sole trader to limited company: the company is a new controller and needs its own registration. Cancel the old one once the sole trade stops.
- Taking over another firm's customers: if you buy a business or its customer list, check the data was collected fairly and update your privacy notice before you contact anyone.
- Adding call recording, vehicle cameras or a customer portal: new kinds of processing can end an exemption you relied on before.
- Growing past the tier limits: crossing both the staff and the turnover limit moves you to tier 2 at renewal.
- Changing your trading name, address or main contact: update the entry so reminders and letters reach you.
- Working with a new processor, such as a call answering service or cloud job system: the fee does not change, but your records and contracts should.
Put your registration number somewhere you can find it quickly: in your privacy notice, on your supplier onboarding pack and in your business records. It answers a common question from letting agents and commercial clients in seconds.
What happens if you do not pay
The regulator checks company and business data against its register and writes to organisations that appear to be missing. If you should pay and do not, it can issue a monetary penalty, which is much larger than the fee itself. It also publishes details of some penalties, which is not a search result you want next to your trading name.
There is a commercial risk too. Letting agents, housing associations and commercial clients increasingly ask suppliers to confirm their registration number in onboarding forms. Being able to answer straight away looks professional. Being caught out makes a client wonder what else is missing.
Example: a three-van firm checks its position
Example. A heating firm has three engineers, an office manager and turnover of about £400,000. It uses a job management app, records incoming calls for training and disputes, and has forward-facing cameras in two vans. The owner assumed the firm was exempt because it only uses customer data to do the work.
Running through the self-assessment, the call recordings and van cameras mean the processing is not limited to the exempt purposes. With four staff and turnover under the tier 1 limit, the firm is tier 1. It registers, pays £47 by direct debit[1], and adds the registration number to its supplier forms and privacy notice.
Paying is the easy part
The fee is a few pounds a month for most firms. Compliance is the bigger job: knowing what data you hold and why, telling customers in a privacy notice, keeping data secure, deleting it when you no longer need it and answering requests properly. Our guide to UK GDPR essentials for a plumbing business sets out the full list.
Two related rules catch firms out. Marketing emails and texts are governed by separate rules, covered in sending marketing texts and emails legally. And if you record calls, you need to tell callers and set a retention period, which our guide to call recording law for trades explains. Get those right and the fee is the least of your worries.
Frequently asked questions
How much is the ICO fee for a small plumbing business?
Most plumbing firms are tier 1, which costs £52 a year, or £47 if you pay by direct debit. Tier 1 covers turnover up to £632,000 or no more than 10 staff.
Are sole traders exempt from the data protection fee?
Not automatically. Sole traders pay unless all their processing is exempt. Recording calls, using vehicle cameras for crime prevention or other processing beyond the core purposes usually means paying.
Do I need to pay again if I become a limited company?
Yes. A limited company is a separate legal person, so it is a new controller and needs its own registration and fee.
Does paying the fee mean my business complies with GDPR?
No. It is a separate legal requirement. You still need a lawful basis, a privacy notice, good security and sensible retention.
References
legislation.gov.uk (The National Archives) (2025). The Data Protection (Charges and Information) Regulations 2018, regulation 3 (opens in a new tab) ↑
legislation.gov.uk (The National Archives) (2018). The Data Protection (Charges and Information) Regulations 2018, regulation 2 (opens in a new tab) ↑
Office for National Statistics (Nomis) (2026). UK Business Counts - enterprises by industry and employment size band (SIC 2007 class 43.22), via Nomis (opens in a new tab) ↑
Office for National Statistics (Nomis) (2026). UK Business Counts - enterprises by industry and turnover size band (SIC 2007 class 43.22), via Nomis (opens in a new tab) ↑
Office for National Statistics (Nomis) (2026). UK Business Counts - enterprises by industry and turnover size band (SIC 2007 class 43.22), via Nomis (opens in a new tab) ↑