Emergency out of hours

Paperwork for an emergency call-out: what to record

A practical emergency job sheet: the times, findings, safety checks and customer sign-off to record on every call-out, and why each line matters.

Ava research teamPublished 7 min read

On this page
  1. Paperwork is part of the repair
  2. The minimum emergency job sheet
  3. Times: log five, not one
  4. Findings a stranger can follow
  5. Safety observations to record every time
  6. Landlord jobs: what an emergency visit is not
  7. Customer sign-off
  8. Storing records sensibly
  9. Put the records to work
  10. Example: one job sheet, start to finish
  11. Frequently asked questions
  12. References

Key takeaways

  • An emergency job sheet should let a stranger understand what happened, when, and why you did what you did.
  • Log five times: call received, arrival, made safe, work complete, departure.
  • Record whether a carbon monoxide alarm is present and working; only 62% of homes in England had one in 2024[1].
  • A dangerous gas fitting caused by its installation or servicing must be reported to HSE within 14 days[2].

Paperwork is part of the repair

Night-time call-outs are where paperwork slips. The engineer is tired, the customer is relieved, and the job sheet ends up as three words and a signature. Weeks later a landlord queries the invoice, an insurer asks when the water was isolated, or a customer claims the engineer left a gas appliance unsafe. The only defence is what was written down at the time.

Good emergency paperwork is short, consistent and mostly tick boxes and fixed fields. It records what you found, what you did, what you left and what you told the customer. It is also where your safety duties show: unsafe situations, warnings given and anything you must report later.

The minimum emergency job sheet

Ten fields cover nearly every domestic emergency call-out.
FieldExample entryWhy it matters
Caller and siteTenant, Flat 2; landlord via agentShows who asked and who pays
Reported problem"No heating or hot water since 6pm"The customer's words, before diagnosis
TimesCall 19:40, arrive 21:05, safe 21:15, complete 22:30, leave 22:40Response, charging bands and insurer questions
FindingsFan failed; error code shown; flue checkedWhat was actually wrong
Work done and partsFan replaced; part number; testsLinks stock, warranty and invoice
Safety checksCombustion reading recorded; CO alarm present and testedEvidence the appliance was left safe
Unsafe situationsNone, or category, notice issued, customer responseYour legal record if anything happens later
Price agreedAttendance plus repair as quoted, accepted at 21:40Prevents billing disputes
Advice givenBook annual service; condensate pipe at risk in frostShows advice was offered
Sign-offCustomer name, signature or emailed acceptanceAgreement to price and completion

Build these fields into your job software so they cannot be skipped. Fixed fields with drop-down options beat a blank notes box: they are quicker on a phone at midnight and easier to search when you need to find every job on a particular boiler model.

Times: log five, not one

Most job sheets record one time, the arrival. Emergency work needs five, because each answers a different question someone may ask later.

  1. Call received: when your firm knew about the problem, which matters for any response promise and for landlords with legal deadlines.
  2. Arrival on site: the basis for charging bands and for measuring your own response.
  3. Made safe: when water, gas or electrics were isolated or the danger removed, which insurers often ask about.
  4. Work complete: when the repair was tested and the system handed back.
  5. Departure: the end of chargeable time, and when the customer was left alone with the system.

Let the app stamp the times automatically when the engineer taps each stage, and allow corrections only with a note. Hand-written times added after the event are the first thing a sceptical reader doubts.

Findings a stranger can follow

Write findings as if the reader has never seen the property. Name the appliance by make and model, describe the fault in one sentence, say how you confirmed it, and list the tests after the repair. "Pump seized; confirmed by no flow with pump powered; replaced; system pressure and operation tested on heating and hot water" is complete. "Fixed boiler" is not.

Attach photos at three moments: as found, the failed part or fault, and as left. Include the appliance data badge and any readings displayed on your instruments. Photos taken in the same order every time are easy to review and hard to dispute.

Safety observations to record every time

Emergency visits are often the only time an engineer sees inside a home for years, so use the job sheet to capture basic safety observations. Carbon monoxide alarms are the obvious one. The English Housing Survey found 62% of dwellings in England had a CO alarm in 2024, up from 60% in 2023[1], which leaves a large minority of homes without one.

Dwellings in England with a carbon monoxide alarm, 2024Up from 60% in 2023
Dwellings in England with a carbon monoxide alarm, 2024Donut chart. With a CO alarm: 62%.With a CO alarm: 62%62%
  • With a CO alarm 62%

Source: Ministry of Housing, Communities and Local Government (GOV.UK), 2024[1]

Show the data
ItemValue
With a CO alarm62%
  • CO alarm present near fuel-burning appliances, and whether it sounded when tested.
  • Ventilation and flue visibly intact, with any concerns described.
  • Any unsafe situation found, its classification under your industry procedure, the notice or label issued and whether the customer agreed to the action.
  • Advice given and declined, such as a recommendation to service or replace an appliance.

Some findings create a reporting duty. Under RIDDOR, where a Gas Safe registered business has enough information to decide that the design, construction, installation, modification or servicing of a gas fitting is or has been likely to cause death, loss of consciousness or hospital treatment, it must report that to HSE within 14 days[2]. Your job sheet is the source for that report, so record the evidence clearly on the night.

Landlord jobs: what an emergency visit is not

Landlords must have each gas appliance and flue checked for safety within 12 months of installation and at intervals of not more than 12 months, and must give existing tenants a copy of the record within 28 days of the check[3]. An emergency repair visit is not that check unless you carry out and record the full safety check. Say so on the job sheet, and do not issue a gas safety record for an appliance you only partly examined.

If you fit a new boiler on the back of an emergency, complete the commissioning record properly. The paper Benchmark checklist is no longer maintained; the record has moved online and to the Benchmark apps[4], so make sure engineers know how to complete it digitally before they need to.

Customer sign-off

Ask the customer to confirm two things: that they agreed the price before work started, and that the work described was completed. Show them the sheet on the screen, not just the signature box. If they refuse to sign, note the refusal and the reason given, and send the job sheet by email anyway so they have a copy on a durable medium.

If extra work was agreed on the same visit, keep it on a separate quote with its own acceptance. For off-premises contracts, an express request to start work within the cancellation period must be made on a durable medium[5], and that is easiest to show when the extra job has its own document.

Storing records sensibly

Job sheets contain personal data: names, addresses, phone numbers and sometimes notes about health or vulnerability. Keep them in your job system, not on engineers' personal phones, limit who can see sensitive notes, and set a retention period that covers warranties, insurance claims and gas safety questions. Decide that period once, write it in your privacy notice, and apply it consistently.

Back up records outside the engineer's device the moment the job closes. A tablet left in a van overnight, or a phone dropped in a flooded cellar, should never be the only copy of a job sheet with an unsafe situation on it. Most job software syncs automatically; check that it does when engineers are offline in basements and rural areas, and that the sync completes before the job shows as closed.

Put the records to work

Consistent job sheets are not only a defence. Read together, they tell you how the business is running. Once a month, pull the emergency jobs and look at a few simple measures: time from call to arrival by time band, the share fixed on the first visit, the parts most often missing, and how many jobs recorded an unsafe situation or a customer refusing advice.

Those numbers show where to spend effort. A rising call-to-arrival time on Sunday evenings points to the rota. A cluster of missing parts points to van stock. Repeated advice about unlagged condensate pipes points to a frost-protection offer customers would welcome before winter. None of it is possible if half the job sheets say "fixed".

Example: one job sheet, start to finish

Example: a call comes in at 19:40 from a tenant with no heating. The engineer taps arrival at 21:05, isolates the boiler at 21:15 while diagnosing, finds a failed fan, gives the price for the repair and records acceptance at 21:40. The fan is replaced, a combustion reading is taken and saved, the CO alarm in the kitchen is tested and sounds, and photos are attached in order.

Example, continued: the engineer notes that the condensate pipe runs externally without lagging and that the tenant was advised to report it to the agent. The job sheet is emailed to the tenant and the agent at 22:42. When the agent rings a month later about frost damage, the firm can show the advice was given.

Frequently asked questions

What should a plumber write on an emergency job sheet?

Who called and why, five key times, findings, work and parts, safety checks, any unsafe situation and action taken, the price agreed, advice given and the customer's sign-off.

Is an emergency repair the same as a landlord gas safety check?

No. Landlords need each appliance and flue checked at least every 12 months[3]. A repair visit only counts if the engineer carries out and records the full safety check.

Do gas engineers have to report dangerous appliances?

Where the danger comes from the design, construction, installation, modification or servicing of a gas fitting and is likely to cause death or serious harm, the registered business must report it to HSE within 14 days[2].

What if the customer refuses to sign the job sheet?

Record the refusal and the reason given, then email the job sheet to the customer so they still have a written copy.

References

  1. Ministry of Housing, Communities and Local Government (GOV.UK) (2024). English Housing Survey 2024 to 2025: Chapter 1, housing quality (opens in a new tab) ↑

  2. legislation.gov.uk (The National Archives) (2013). The Reporting of Injuries, Diseases and Dangerous Occurrences Regulations 2013, regulation 11 (opens in a new tab) ↑

  3. legislation.gov.uk (The National Archives) (1998). The Gas Safety (Installation and Use) Regulations 1998, regulation 36 (opens in a new tab) ↑

  4. Heating and Hotwater Industry Council (HHIC) (2026). Benchmark goes digital - what homeowners need to know (opens in a new tab) ↑

  5. legislation.gov.uk (The National Archives) (2013). The Consumer Contracts (Information, Cancellation and Additional Charges) Regulations 2013, regulation 36 (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo