Boilers heating

Moving a boiler: scoping and quoting relocations

Scope and quote boiler relocations: loft and kitchen moves, flue and condensate routes, gas pipe runs, controls, notification and making good.

Ava research teamPublished 6 min read

On this page
  1. Why customers want boilers moved
  2. Start with why and where
  3. Flue: the route that usually decides it
  4. Condensate: plan it, do not improvise it
  5. Gas and water runs
  6. Loft and cupboard positions
  7. Bedrooms, lofts and carbon monoxide alarms
  8. Regulations and paperwork
  9. Working alongside builders and kitchen fitters
  10. Worked Example: a kitchen refit relocation
  11. Relocation mistakes that cause call-backs
  12. Pricing honestly
  13. Frequently asked questions
  14. References

Key takeaways

  • Relocations often follow extensions and loft conversions; homes with four or more bedrooms grew as a share of households between 2011 and 2021[1].
  • Price the four routes separately: flue, condensate, gas and water, plus electrics and making good.
  • Condensate into sanitary pipework needs at least 22mm pipe through a 75mm trap, preferably to an internal stack[2].
  • Treat a relocation as an installation: post-work gas safety checks, notification within 30 days and the commissioning record[3][4].

Why customers want boilers moved

Boiler relocations usually ride along with a bigger project: a kitchen refit where the boiler is in the way, an extension that swallows the wall the flue comes through, or a loft conversion that turns the airing cupboard into a landing. Homes are being enlarged. Census 2021 found 21.1% of households in England and Wales had four or more bedrooms, up from 19.0% in 2011[1].

Households in England and Wales by number of bedrooms, 2011 and 2021Census 2011 and 2021
Households in England and Wales by number of bedrooms, 2011 and 2021Column chart. One: 2011 11.8%, 2021 11.4%; Two: 2011 27.6%, 2021 27.1%; Three: 2011 41.6%, 2021 40.4%; Four or more: 2011 19%, 2021 21.1%.0%20%40%60%One · 2011: 11.8%11.8%One · 2021: 11.4%11.4%OneTwo · 2011: 27.6%27.6%Two · 2021: 27.1%27.1%TwoThree · 2011: 41.6%41.6%Three · 2021: 40.4%40.4%ThreeFour or more · 2011: 19%19%Four or more · 2021: 21.1%21.1%Four or moreHouseholds in England and Wales by number of bedrooms, 2011 and 2021Column chart. One: 2011 11.8%, 2021 11.4%; Two: 2011 27.6%, 2021 27.1%; Three: 2011 41.6%, 2021 40.4%; Four or more: 2011 19%, 2021 21.1%.0%20%40%60%One · 2011: 11.8%One · 2021: 11.4%OneTwo · 2011: 27.6%Two · 2021: 27.1%TwoThree · 2011: 41.6%Three · 2021: 40.4%ThreeFour or more · 2011: 19%Four or more · 2021: 21.1%Four ormore
  • 2011
  • 2021

Source: Office for National Statistics, 2021[1]

Show the data
Item20112021
One11.8%11.4%
Two27.6%27.1%
Three41.6%40.4%
Four or more19%21.1%

Because relocations sit inside other building work, they are prone to scope creep and timing problems. The builder wants the boiler moved before the plasterer arrives, the customer wants hot water throughout, and nobody has thought about where the condensate goes. Your survey needs to settle those questions before you price.

Start with why and where

  1. Why is it moving? Space, a new room layout, noise, or to make way for building work.
  2. Where exactly do they want it, and is that position possible for a flue, condensate, gas and service access?
  3. Is the boiler being replaced at the same time? If so, the replacement rules for sizing, controls and Boiler Plus apply too.
  4. Who else is on site, and when? Agree the sequence with the builder or kitchen fitter in writing.
  5. What does the customer need during the work: heating, hot water or neither for a few days?

Often the best answer is not the first position the customer suggests. A boiler moved to the far end of the house may need a long gas run, a flue through a difficult wall and a condensate pump. Offer an alternative if it is simpler and more reliable.

Flue: the route that usually decides it

The new position must allow a flue that meets the manufacturer's length limits and terminal clearances from windows, doors, eaves, boundaries and other terminals. Check the plume direction too: a terminal that is technically compliant but blows into a neighbour's patio causes complaints.

  • Use the flue kit the manufacturer specifies for the new position and length.
  • For loft positions, a vertical flue through the roof needs proper weathering and roof access.
  • Check whether an extension or conservatory will later sit near the terminal.
  • Record the terminal position and clearances on the commissioning record with photos.

Condensate: plan it, do not improvise it

Approved Document H allows boiler condensate to connect to sanitary pipework using pipe of at least 22mm diameter through a 75mm condensate trap; if an extra trap is provided outside the boiler to achieve the 75mm seal, there should be an air gap between the boiler and that trap[2]. The connection should preferably be made to an internal stack, and if it joins a branch pipe it should be downstream of any sink waste[2].

Pipework receiving condensate should be made from materials resistant to a pH of 6.5 and lower, and the installation should follow BS 6798[2]. For a loft or a first-floor cupboard, look for an internal stack or waste you can reach with a continuous fall. Where gravity is impossible, a condensate pump is the fallback, with its own maintenance needs.

Avoid long external condensate runs on relocations. They freeze in cold snaps and generate the January call-outs everyone remembers.

Gas and water runs

Moving the boiler further from the meter lengthens the gas run and adds fittings, which increases pressure loss. Size the new pipework for the boiler's maximum gas rate and the full length from the meter, and check the working pressure at the appliance on commissioning. Sleeve pipes through walls and avoid running gas in cavities.

  • Heating flow and return, and on a combi the cold main and hot water outlet, all need rerouting.
  • The pressure relief valve discharge must terminate safely where it cannot harm anyone.
  • Check the electrical supply and provide a fused spur in the new position.
  • Allow for draining and refilling the whole system, cleaning and inhibitor.

Loft and cupboard positions

A boiler in a loft needs to be safe to service. Check the manufacturer's requirements, which commonly include a fixed retractable ladder, boarding from the hatch to the boiler, a guard rail at the hatch and fixed lighting. Protect pipework and condensate from frost, because lofts are cold.

Cupboard positions need enough clearance for servicing and any ventilation the manufacturer specifies. If the customer plans to fill the cupboard with storage, explain that access must be kept clear.

Bedrooms, lofts and carbon monoxide alarms

Relocations often move a boiler closer to where people sleep. All carbon monoxide alarms in the UK must meet EN 50291-1:2018, while the rules on where alarms are required differ between England, Wales, Scotland and Northern Ireland[5]. Check the rules for the nation you are working in and recommend an alarm in the appropriate place whatever the minimum requirement.

Regulations and paperwork

Installing or replacing a heating system can need building regulations approval[6], and a relocation is treated as installing the appliance in a new position. Notify it through your competent person scheme so the occupier gets the certificate and building control is notified within 30 days of completion[3].

After the work, carry out the checks the gas regulations require: the effectiveness of the flue, the supply of combustion air, the operating pressure or heat input, and safe operation[4]. If the boiler is replaced at the same time, add the room controls, interlock and water treatment that a replacement requires.

Working alongside builders and kitchen fitters

Most relocation problems are coordination problems. The builder closes up a wall before the gas pipe is tested, the kitchen fitter boxes in the boiler so tightly it cannot be serviced, or the plasterer arrives a day before you can move the flue. Agree the sequence in writing with everyone involved.

  1. Agree the drawing

    Mark the new boiler, flue terminal, condensate route and pipe runs on the builder's or kitchen plan.

  2. Fix the first fix date

    Run pipework, gas and condensate before walls are boarded or units fitted.

  3. Test before closing up

    Gas tightness and water pressure tests before anything is hidden.

  4. Protect access

    Agree clearances around the boiler with the fitter so units or boxing do not block servicing.

  5. Second fix and commission

    Hang the boiler, connect, commission and record once the area is finished.

Worked Example: a kitchen refit relocation

Example: fictional quote lines for moving a combi during a kitchen refit
Quote lineIncluded
Survey and designFlue, condensate and gas route agreed with customer and kitchen fitter
Drain down and removalExisting boiler and flue removed, wall opening left for builder to make good
New positionCombi refitted on new external wall with new manufacturer flue kit
GasNew pipe run sized for full length from meter, sleeved through wall
Water and heatingFlow, return, cold main and hot outlet rerouted; relief valve discharge outside
CondensateInternal connection to sink waste downstream of trap, with air gap
CommissioningClean, inhibitor, readings, notification
ExcludedPlastering and tiling by kitchen fitter

Example. Because the quote lists what is excluded as well as included, the customer knows the kitchen fitter will make good the old flue hole. Agreeing the sequence in writing means the boiler is moved before the new units go in, not after.

Relocation mistakes that cause call-backs

  • Gas pipe reused at the old size over a much longer run, leaving the boiler short of pressure at full output.
  • Condensate run outside along a north wall to reach a gully, which freezes in the first cold snap.
  • Pressure relief discharge left terminating in a cupboard or under a sink.
  • Boiler boxed in by new units with no removable panel for servicing.
  • Old flue hole left for 'someone' to make good, and nobody does.
  • Room controls left behind in the old position, so the thermostat now sits in the wrong room.

Each of these is cheap to avoid at survey and expensive to fix after the kitchen is finished. Add them to your relocation survey sheet so they are checked on every job.

Pricing honestly

Relocations vary more than almost any other heating job. Price from the survey, not from a standard figure, and show the major lines so the customer can see why moving a boiler three metres may cost less than moving it to the loft. See condensate pipe rules, flue position rules and what to include in a boiler quote.

Frequently asked questions

Does moving a boiler need building regulations notification?

Treat a relocation as installing the appliance in a new position and notify it through your competent person scheme within 30 days of completion.

Can I reuse the old flue?

Generally use the flue kit the manufacturer specifies for the new position and length. Check the installation instructions.

How should condensate be drained from a loft boiler?

Preferably to an internal stack or waste with a continuous fall, using at least 22mm pipe through a 75mm trap, or a condensate pump where gravity is not possible.

Does a loft boiler need a ladder and boarding?

Manufacturers commonly require safe access such as a fixed ladder, boarding, a guard rail and lighting. Check the specific instructions.

References

  1. Office for National Statistics (2021). Housing, England and Wales: Census 2021 (opens in a new tab) ↑

  2. Ministry of Housing, Communities and Local Government (GOV.UK) (2015). Approved Document H: drainage and waste disposal (2015 edition) (opens in a new tab) ↑

  3. legislation.gov.uk (The National Archives) (2010). The Building Regulations 2010, regulation 20 (opens in a new tab) ↑

  4. legislation.gov.uk (The National Archives) (1998). The Gas Safety (Installation and Use) Regulations 1998, regulation 26 (opens in a new tab) ↑

  5. Heating and Hotwater Industry Council (HHIC) (2025). A guide to carbon monoxide (CO) alarm legislation for heating engineers (opens in a new tab) ↑

  6. GOV.UK (2026). Building regulations approval (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo