Key takeaways
- Build the list from the homes you serve: mains gas heated 73.8% of households in England and Wales at the last Census[1].
- Group stock by job type (safety, leaks, boiler faults, frost, controls) so gaps are obvious at a glance.
- Give every line a minimum and maximum quantity and refill to the maximum, never to a guess.
- Allocate parts to jobs and audit each van monthly; shrinkage hides in unallocated stock.
Why a written list beats a full van
Every engineer's van tells a story about the last three years: a crate of fittings nobody uses, a shelf of parts for a boiler range that was discontinued, and never quite enough of the thing that fails every January. A written stock list fixes three problems at once. Engineers arrive with what they need more often, the business stops paying for parts that sit in the van for years, and missing stock becomes visible instead of quietly walking away.
The list does not need to be clever. It needs to be specific, owned by one person in the office, reviewed before winter and short enough that an engineer will actually check it on a Friday afternoon.
Start from the homes you actually serve
Your stock should mirror your customers' heating, not a merchant's catalogue. At the 2021 Census, mains gas central heating served 73.8% of households in England and Wales, about 18.3 million homes, while 8.5% used electric central heating and another 8.5% used two or more types[1]. Around four million UK homes are not connected to the mains gas grid and rely on heating oil or LPG[2], so rural firms need a very different oil and LPG section from city firms.
Then narrow it to boiler types. In England, 63% of homes had a condensing combination boiler in 2024[3], which is why combi diverter valves, fans, pumps and pressure-related parts dominate most lists. Pull a report from your job records of the makes and models you attended last winter. The top ten models usually cover most of your breakdowns, and those ten decide your boiler parts section.
Stock by job type
Organise the van and the list by the job each item supports. When an engineer opens the side door, the question is "can I do a leak job right now?", not "do I have 22mm elbows?".
- Safety and testing: flue gas analyser and current calibration certificate, manometer, gas leak detection fluid, CO alarm for personal use, warning labels and unsafe situation notices, isolation tags, torch and spare batteries.
- Leaks and bursts: repair clamps in common sizes, push-fit and compression couplings, stop ends, pipe freezing kit, flexible tap connectors, washers and O-ring assortment, dust sheets and buckets.
- Boiler faults: the parts your top models fail on most often, plus universal items such as pressure relief valves, filling loops, auto air vents and expansion vessel valves.
- Frost and condensate: lagging, trace heating or larger condensate pipe and fittings, a kettle-safe jug for thawing, and customer leaflets on condensate freezes.
- Controls: a universal programmer, a wireless room thermostat, batteries and a motorised valve head for the systems you see most.
- Customer care: overshoes, floor protection, a loan heater if there is room, and blank job sheets in case the tablet dies.
| Section | Review trigger | Owner |
|---|---|---|
| Safety and testing | Calibration due date; any used warning notice | Engineer, checked by office |
| Leaks and bursts | Weekly top-up | Engineer |
| Boiler faults | Quarterly against job records | Office stock lead |
| Frost and condensate | Before November | Office stock lead |
| Controls | Quarterly | Office stock lead |
Reorder points engineers will follow
Give every line a minimum and a maximum. The minimum is the quantity below which the engineer orders; the maximum is what the van is refilled to. Base both on usage, not on what fits on the shelf. Count how many of each item were fitted in the last three months, divide by the number of weeks, then set the minimum to cover the time it takes to restock plus a small buffer.
Pull usage
Export parts fitted per van from your job system for the last quarter, or from merchant invoices if parts are not yet recorded against jobs.
Set min and max
Minimum covers a typical restock gap; maximum adds a week of normal use. Round to sensible pack sizes.
Make ordering easy
One message or form per week with the items below minimum. The office places one consolidated order per merchant.
Refill to max
When stock arrives, fill each line to its maximum and tick the list.
Review quarterly
Drop lines that have not moved in six months; raise lines that ran out twice.
Example: an engineer fits about two flexible tap connectors a week and the merchant restocks within two days. A minimum of two and a maximum of five keeps the van covered without a box of twenty going brittle under the seat.
Seasonal swaps
A van stocked the same way in July and January is wrong for one of them. Plan two swaps a year. In late October, add frost and condensate items, extra pumps, fans and diverter valves for your common models, more filling loops and pressure relief valves, and a loan heater if there is room. Take out summer-heavy lines such as outdoor tap kits and bulk bathroom fittings, which can live in the store.
In spring, reverse it, and use the quieter weeks to return unused boiler parts to the merchant where their returns policy allows. Each swap is also the natural moment to audit the van fully, check calibration dates and replace any warning notices or labels that have been used.
Controlling shrinkage
Stock goes missing in three ways: fitted but not recorded, borrowed by another van, and lost or stolen. The first is the biggest and the easiest to fix. Make adding parts to the job a required step before the job can be closed, and charge or absorb them consciously rather than by accident.
- Allocate every part over a low value threshold to a job number, including warranty and goodwill work.
- Log van-to-van transfers in the team chat or job system with the part and quantity.
- Audit each van monthly against the list. A photo audit of each shelf takes ten minutes and is easier to compare month to month.
- Keep high-value items such as PCBs, fans and controls in a locked box or in the office store, issued per job.
- Empty vans of valuable stock overnight where theft is a known risk in your area, and record serial numbers of tools.
Weight, layout and the next van
A heavy van is slower, costs more to run and can end up overloaded without anyone noticing. Weigh a fully stocked van at a public weighbridge once and compare it with the plated limits; many firms are surprised. Put heavy items low and near the axle, and keep the safety kit and leak kit closest to the door, because those are the jobs where seconds matter.
Keep tools and stock on separate lists. Tools are assets with serial numbers, calibration dates and insurance values; stock is consumed and reordered. Mixing them makes audits slow and lets a missing analyser hide among boxes of fittings.
Plan for your next vehicle when you write the list. New van registrations in the UK reached 81,644 in April to June 2026, up 8.8% on a year earlier, and zero emission vans made up 10.5% of them[4]. If an electric van is on your horizon, check its payload with your stock list loaded, not empty, and think about where you will charge it on long emergency shifts.
Example: rebuilding one engineer's list
Example: a sole trader in Cumbria with many oil-fired customers finds his van carries a full gas boiler parts range but only one oil nozzle size. Job records show that over a third of his winter call-outs were oil boilers. He moves half the gas parts to a garage shelf, adds nozzles, filters and an oil line repair kit, and sets minimums for each. The next winter his first-visit fix rate on oil jobs rises and he no longer drives to the merchant twice a day.
Example, continued: the gas parts on the garage shelf are not wasted. He lists them by model, takes the relevant box when a gas job is booked, and returns slow movers to the merchant in spring. The van is lighter, the list fits on one page, and his partner, who does the books, can see at a glance what was bought, fitted and charged each month.
Frequently asked questions
What should a heating engineer keep on the van?
Safety and testing kit, a leak and burst kit, parts for the boiler models you attend most, frost and condensate items, common controls and customer protection items such as overshoes and dust sheets.
How do I decide how much stock to carry?
Set a minimum and maximum for each line from the last quarter's usage and your restock time, then refill to the maximum each week.
How can I stop van stock going missing?
Allocate parts to job numbers, log transfers between vans, audit monthly and lock away high-value parts.
Should rural firms carry different stock?
Yes. Around four million UK homes are off the gas grid and use oil or LPG[2], so rural vans need oil and LPG parts that city vans rarely carry.
References
Office for National Statistics (2021). Housing, England and Wales: Census 2021 (opens in a new tab) ↑
Heating and Hotwater Industry Council (HHIC) (2026). HHIC and OFTEC urge Government to back hybrid heating systems to support off-grid households (opens in a new tab) ↑
Ministry of Housing, Communities and Local Government (GOV.UK) (2024). English Housing Survey 2024 to 2025: Chapter 2, energy efficiency (opens in a new tab) ↑
Department for Transport (GOV.UK) (2026). Vehicle licensing statistics: April to June 2026 (opens in a new tab) ↑