Emergency out of hours

Lending temporary heaters during repairs

A written policy for lending heaters during boiler repairs: which heaters to stock, safety checks, loan forms, deposits and getting them back.

Ava research teamPublished 7 min read

On this page
  1. Why lending heaters needs a written policy
  2. Which heaters to stock
  3. Electrical safety checks that stand up
  4. The loan form
  5. Who gets one first
  6. At the door: handover in two minutes
  7. The home's wiring and sockets
  8. Getting heaters back
  9. Landlords, agents and tenants
  10. Example: a stock of six
  11. Frequently asked questions
  12. References

Key takeaways

  • There is no legal requirement for annual PAT testing, but equipment you lend must be kept in a safe condition, and HSE strongly recommends inspecting hired equipment before each hire[1].
  • Stock oil-filled radiators or convectors with thermostats and tip-over cut-outs; leave fan and radiant heaters off the list.
  • A one-page loan form with serial number, condition, deposit and return date stops heaters disappearing.
  • Prioritise loans for homes with no other heat and for people the NHS lists as most at risk from cold[2].

Why lending heaters needs a written policy

Most heating firms lend the odd heater when a boiler part is on order. Without a policy, the heaters are whatever was in the stores, nobody knows who has them, and the one that comes back with a cracked plug goes straight out to the next customer. A written loan policy fixes that in an afternoon and turns a favour into a dependable service that callers remember.

The need is real in some homes more than others. Only 85% of private rented homes in England had central heating in 2024, against 95% of owner-occupied and local authority homes[3]. At the 2021 Census, 367,000 households in England and Wales had no central heating at all[4]. When a single boiler or storage system fails in those homes there may be nothing else to fall back on.

Homes in England with central heating, by tenureEnglish Housing Survey, 2024
Homes in England with central heating, by tenureComparison. Private rented: 85%; Owner-occupied and local authority: 95%.85%Private rentedPrivate rented: 85%95%Owner-occupied and local authorityOwner-occupied and local authority: 95%Homes in England with central heating, by tenureComparison. Private rented: 85%; Owner-occupied and local authority: 95%.85%Private rentedPrivate rented: 85%95%Owner-occupied and local authorityOwner-occupied and local authority: 95%

Source: Ministry of Housing, Communities and Local Government (GOV.UK), 2024[3]

Show the data
ItemValue
Private rented85%
Owner-occupied and local authority95%

Which heaters to stock

Choose heaters that are hard to misuse. Your customers will include people with limited mobility, children and pets, and the heater will run for long hours in rooms you have never seen.

A stock policy for loan heaters, favouring low surface temperature and automatic cut-outs.
TypeWhy stock itCautions
Oil-filled radiatorSteady heat, low surface temperature, quiet, stable on castorsHeavy to carry upstairs; slow to warm a room
Convector with thermostatLight, warms a room quickly, wall or floor useMust have a tip-over cut-out and overheat protection
Fan heaterCheap and compactLeave off the list: noise, hot surfaces and blocked inlets
Halogen or radiant barInstant heat in one spotLeave off the list: exposed hot elements, fire risk near fabrics
Electric shower or immersion sparesRestores hot water where fittedOnly where an engineer installs or checks them

How many to hold depends on your call volume, not a formula. A practical starting point is to look at last winter's diary: count the days when you had customers waiting for parts with no other heat, and stock enough to cover a bad week with a couple spare. Buy one model if you can, so plugs, feet and spares are interchangeable and staff know how each control works.

Electrical safety checks that stand up

HSE is clear that the law does not make inspection or testing of electrical appliances a legal requirement on a fixed timetable. What it does require is that any electrical equipment that has the potential to cause injury is maintained in a safe condition, and HSE describes visual examination as an essential part of that process[1]. For equipment supplied to others, HSE strongly recommends a formal inspection and test before each hire[1]. Treat every loan as a hire.

  1. Before it leaves the stores

    Check the plug, fuse rating, cable and grommet, case, feet or castors and controls. Switch it on, confirm the thermostat clicks and the tip-over switch cuts out. Have it tested by a competent person if it has not been tested since its last return.

  2. Tag and record

    Fit a tag with the heater's number and the date of the last check, and note the same in your loan register.

  3. On return

    Inspect again before it goes back on the shelf. Anything with a cracked case, scorched plug or damaged cable is quarantined, labelled "do not use" and repaired or scrapped.

  4. Once a year

    Before winter, test every heater in stock regardless of use and replace the oldest units first.

The loan form

One page is enough. Keep it in your job system so it links to the repair, and give the customer a copy by email or on paper.

  • Customer name, address, phone and the job reference it relates to.
  • Heater number, type and condition at handover, with a photo.
  • Date lent and expected return date, usually the day the repair is completed.
  • Deposit taken, if any, and how it will be refunded.
  • Customer's agreement to the safe-use guidance and to report any fault immediately.
  • Signature or recorded acceptance, plus the name of the person who delivered it.

Deposits are a business choice. Some firms waive them for existing customers and anyone in a vulnerable situation, and take one for new customers or long loans. Whatever you decide, write it down so the office applies it consistently, and never refuse a heater to someone at risk because they cannot pay a deposit on the spot.

Who gets one first

When stock runs short in a cold spell, prioritise by need rather than by who asked first. The NHS lists people aged 65 and older, babies and children under five, people with long-term health conditions, disabled people and pregnant women among those most at risk from cold, and advises at least 18°C in the rooms they use[2].

  1. No working heating at all and someone in a high-risk group at home.
  2. No working heating, no high-risk group, repair delayed overnight or longer.
  3. Partial heating, for example one room or a gas fire only, with a delayed repair.
  4. Comfort requests where heating is working but not fully.

At the door: handover in two minutes

Whoever delivers the heater should set it up, not just leave it in the hall. Pick the room the customer will use most, place it on a flat floor away from curtains, bedding and furniture, plug it straight into a wall socket rather than an extension lead, and show the customer the on switch and thermostat.

Say: "This one runs warm but the outside stays safe to touch. Keep it clear of anything that can burn, never cover it to dry clothes, and if it smells hot or the plug feels warm, switch it off at the wall and ring us straight away. We'll collect it when your boiler's back on."

Mention running costs honestly if asked: electric heaters can be expensive to run for long periods, so heating one room with the door closed is the sensible approach. Do not estimate a figure you have not worked out.

The home's wiring and sockets

A safe heater can still cause trouble on tired wiring. Before you leave it running, look at the socket you are using: scorch marks, a loose faceplate, a cracked switch or a plug that falls out easily are all reasons to choose another socket or not to leave the heater at all. Avoid sockets already feeding several appliances through adaptors. If the only available sockets look unsafe, say so to the customer, note it on the loan form and tell the landlord or a relative. Your engineers are not electricians, but they can spot obvious danger and refuse to add load to it.

Two heaters in one small home can trip a circuit or overload an old installation. Lend one per household unless there is a clear need for two and the wiring looks sound, and record the decision either way.

Getting heaters back

Most losses happen because nobody asked. Make collection part of completing the repair: the engineer who fixes the boiler takes the heater back to the van, ticks it in the loan register and notes its condition. If a different person fixes the boiler, the job cannot be closed until the heater line is cleared. Chase overdue loans by phone after a week, then by letter, and keep a short note of each contact.

Landlords, agents and tenants

In rented homes the tenant usually rings you, but the landlord or agent is your customer. Agree in your terms who is responsible for a loan heater: many firms lend to the tenant on the landlord's account and invoice any loss to the landlord, who can recover it under the tenancy if they choose. Send the agent a copy of the loan form the same day, because they will get the call if the heater is not returned, and include the expected collection date so their own records line up with yours.

Example: a stock of six

Example: a two-van firm buys six identical oil-filled radiators, numbers them H1 to H6 and adds a loan register to its job software. Over one winter they go out on a range of jobs, mostly for parts delays of one or two days. Two come back with damaged plugs, which are replaced before the next loan. One is lost when a tenant moves out; the landlord pays for it under the firm's written terms. The firm adds two more heaters the next autumn because the register shows six were all out on the coldest days.

Frequently asked questions

Do loan heaters need to be PAT tested?

The law does not set a fixed testing timetable, but equipment must be kept in a safe condition and HSE strongly recommends inspecting and testing equipment supplied to others before each hire[1].

What type of heater is safest to lend?

Oil-filled radiators or convectors with a thermostat, tip-over cut-out and overheat protection. Avoid fan heaters and radiant or halogen heaters with exposed hot elements.

Should we charge a deposit for a loan heater?

It is a business decision. Many firms waive it for vulnerable customers and existing clients. Write the rule down and apply it consistently.

Who should get a heater first when stock is short?

Homes with no heating at all where someone is in a high-risk group, such as people aged 65 and older[2], then homes facing an overnight delay.

References

  1. Health and Safety Executive (2026). PAT (portable appliance testing): HSE's answers to popular questions (opens in a new tab) ↑

  2. NHS (2026). Winter vaccinations and winter health (keep warm, keep well) (opens in a new tab) ↑

  3. Ministry of Housing, Communities and Local Government (GOV.UK) (2024). English Housing Survey 2024 to 2025: Chapter 2, energy efficiency (opens in a new tab) ↑

  4. Office for National Statistics (2021). Housing, England and Wales: Census 2021 (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo