Key takeaways
- About 148,600 people work as plumbers and heating installers in the UK, and nearly half are self-employed[1].
- 45% of construction SME employers saw recruitment and skills as an obstacle in 2025[2].
- Demand for low-carbon skills is rising faster than training: the heat pump target is over 450,000 installs a year by 2030[3].
- Firms that train their own people, recruit from wider pools and improve job quality feel the shortage least.
What the shortage looks like on the ground
Ask any heating firm owner about hiring and the answer is usually the same: adverts that attract no qualified applicants, engineers poached by bigger firms, and customers waiting longer in winter because there are not enough hands. The data supports what owners feel, though it is worth being precise about what it shows.
About 148,600 people in the UK worked as plumbers and heating and ventilating installers and repairers in July 2025 to June 2026[1]. Around 48%, some 71,200, were self-employed[1]. That matters for hiring: nearly half the trade works for itself, so the pool of people looking for an employed role is smaller than the headline figure suggests.
- Employees 77,400 52%
- Self-employed 71,200 48%
Source: Office for National Statistics (Nomis), 2026[1]
Show the data
| Item | Value |
|---|---|
| Employees | 77,400 |
| Self-employed | 71,200 |
What employers report
In the government's 2025 small business survey, 45% of construction SME employers saw staff recruitment and skills as an obstacle to business success[2]. It sits alongside late payment as one of the biggest problems construction firms report.
45%
of construction SME employers saw recruitment and skills as an obstacle in 2025[2]
Pay is part of the picture. Median gross hourly pay for employee plumbers and heating and ventilating installers was £18.82 in 2026, against £19.00 for all employees[4]. For a skilled, physical job that often involves on-call work, being paid slightly below the all-employee median does not help attract people from other careers, and it makes self-employment look more attractive to those already qualified.
Where the shortage bites hardest
The gap is sharper for some skills than others. Owners most often struggle to find engineers who are Gas Safe registered across a wide range of appliances, who can work unsupervised from day one, and who are willing to join an on-call rota. Heat pump design and commissioning skills are scarcer still. Basic plumbing labour is easier to find, though many applicants need training before they can work alone.
Timing matters too. The shortage is most painful in winter, when breakdowns peak and every firm wants the same engineers at once. Rural areas feel it more because travel times reduce each engineer's daily jobs and there are fewer local candidates. A firm in a market town may have one experienced applicant a year; a firm in a city may have several but face higher pay expectations.
Why it is getting harder
Three pressures stack on top of each other.
- Low-carbon heating. The government aims for over 450,000 heat pump installations a year by 2030[3], and the Warm Homes Plan says the clean heat and energy efficiency transition could support up to 180,000 additional jobs by 2030[3]. Those jobs need people who can design and install systems the current workforce was not trained on.
- Training capacity. Just under 10,000 people completed a recognised heat pump training qualification in 2024, 15% more than in 2023[5]. That is real growth, but most of those learners are existing engineers adding a skill, not new entrants to the trade.
- A narrow recruitment pool. Only about 2,700 of the UK's 148,600 plumbers and heating installers, under 2%, were women in July 2025 to June 2026[1]. A trade that recruits mainly from half the population will always find it harder to grow.
What it means for a small firm
The shortage is not evenly felt. Firms that rely on hiring fully qualified, experienced gas engineers from the open market feel it most, because they are competing with national installers, energy companies and housing maintenance contractors. Firms that grow their own staff, recruit from different backgrounds and offer a job people want to stay in feel it least.
Small firms do have advantages in this market. They can offer a shorter commute, a say in how the work is done, a variety of jobs rather than the same install every day, and an owner who knows each engineer by name. Larger employers often struggle to offer that. The firms that recruit well tend to make those advantages concrete in their adverts and interviews: a named van, a fixed patch, a fair on-call rota written down, and a training plan with dates. Vague promises of a "family feel" are much less persuasive than a clear description of a week in the job.
Self-employed engineers are another pool. Some would rather have steady work without the admin of running a business, and some would join an employer that offers them a regular diary while letting them keep a few private customers. A conversation about what they want is often more productive than a standard advert.
| Strategy | Time to pay off | Best for |
|---|---|---|
| Train apprentices | Three to four years to a fully qualified engineer | Firms with steady work and an owner or senior engineer who can supervise |
| Hire improvers and upskill | One to two years | Firms with installs that need a second person now |
| Recruit career changers and ex-forces | Varies with training route | Firms willing to support structured training |
| Recruit women and under-represented groups | Depends on outreach and facilities | Any firm; widens the pool it draws from |
| Improve job quality to retain staff | Immediate | Every firm: losing an engineer costs more than keeping one |
Practical steps this year
Measure your own shortage
Count jobs turned away or delayed each month, and what they were worth. It turns a vague feeling into a business case for hiring or training.
Fix retention first
Ask your engineers what would make them stay: hours, on-call rota, van, tools, training, pay. Losing one experienced engineer can undo a year of recruitment.
Start one trainee
An apprentice or an improver on a structured route. Plan supervision and funding before they start.
Advertise differently
Write adverts that describe the actual job, the pay range, the hours and the training. Post them where career changers and women in trades look, not only on trade job boards.
Free up engineer time
Take admin, phone calls and chasing off engineers so the hours you have go further.
Plan low-carbon skills
Decide which of your engineers will train in heat pumps, and when, so you are not hiring for skills you could build.
Example: a fictional four-engineer firm in Bristol has been advertising for a qualified gas engineer for six months with no success. It changes approach: it takes on one apprentice and one improver, moves one experienced engineer to a supervisor role with a pay rise, and books two engineers on heat pump courses. A year later it still has not hired a fully qualified engineer from outside, but it is turning away fewer jobs than before.
What not to do
- Do not rely only on sign-on bonuses. They attract people who move for money and will move again.
- Do not lower the bar on gas competence to fill a gap. Only registered, competent engineers can do gas work, and the employer shares responsibility.
- Do not overload the engineers you have. Constant overtime and back-to-back on-call weeks are the fastest way to lose them.
- Do not write adverts that describe a perfect candidate who does not exist. Describe the job and the support, then judge applicants on potential as well as experience.
- Do not leave training until you are desperate. A trainee started today is a qualified engineer in a few years; one started next winter is not.
It also helps to be clear about what the shortage costs you. Track how many enquiries you decline in each month and the typical value of those jobs. When you know a vacancy is costing several boiler installs every month, it becomes easier to justify a higher wage, a better van or a funded training place. Without that number, recruitment decisions tend to be made on gut feel, usually too late.
Using your existing hours better
When people are scarce, every engineer hour counts. Look at how much of a typical day goes on travel, waiting for parts, chasing customers who are not in, and paperwork. Tighter routing, confirmed appointments, parts checked before the visit and digital job sheets all add up. Small gains across a team of engineers can be worth as much as a new hire, without the recruitment cost.
For more on the hiring side, read how to recruit gas engineers, hiring your first employee and what to pay plumbers and gas engineers.
Frequently asked questions
Is there a shortage of plumbers in the UK?
Employers report one: 45% of construction SME employers saw recruitment and skills as an obstacle in 2025[2], and demand for low-carbon heating skills is rising.
How many plumbers are there in the UK?
About 148,600 people worked as plumbers and heating and ventilating installers in July 2025 to June 2026, around 48% of them self-employed[1].
Will heat pumps make the shortage worse?
They increase demand for new skills. The target is over 450,000 installations a year by 2030[3], so firms that train engineers now will be better placed.
What is the quickest way for a small firm to cope?
Keep the engineers you have, take admin off their time, and start at least one trainee on a structured route.
References
Office for National Statistics (Nomis) (2026). Annual Population Survey - regional - occupation (SOC2020) by sex by employment type, via Nomis (opens in a new tab) ↑
Department for Business and Trade (GOV.UK) (2025). Longitudinal Small Business Survey 2025: SME employers (businesses with 1 to 249 employees) (opens in a new tab) ↑
Department for Energy Security and Net Zero (GOV.UK) (2026). Warm Homes Plan (opens in a new tab) ↑
Office for National Statistics (2026). Annual Survey of Hours and Earnings 2026 provisional, Table 14 (occupation by 4-digit SOC 2020) (opens in a new tab) ↑
Heating and Hotwater Industry Council (HHIC) (2024). Bumper year for UK heat pumps (opens in a new tab) ↑