Key takeaways
- Median full-time weekly pay for employee plumbers and heating installers was £782.50 in April 2026, up 4.3% on 2025[1].
- Median hourly pay for all employees in the occupation was £18.82, just below the £19.00 for all UK employees[1].
- National medians are a starting point: adjust for your local market using live adverts within commuting distance.
- A written pay structure by grade, with clear steps for qualifications and responsibility, does more for retention than ad hoc rises.
What the official data says
The Annual Survey of Hours and Earnings from the Office for National Statistics is the most reliable source for employee pay in the trade. Its occupation group for plumbers and heating and ventilating installers covers employees only, not the self-employed, and the 2026 figures are provisional. Even so, it gives a solid benchmark.
£782.50
median gross weekly pay, full-time employee plumbers and heating installers, April 2026[1]
Median gross weekly pay for full-time employees in the occupation was £782.50 in April 2026, up 4.3% on 2025[1]. Median gross annual pay across all employees in the group, including part-timers, was £37,794, up 2% on the year[1]. For full-time employees, the median annual figure was £39,179, compared with £40,911 for all full-time UK employees[1].
Source: Office for National Statistics, 2026[1]
Show the data
| Item | Value |
|---|---|
| Plumbers, all employees | £37,794 |
| Plumbers, full-time | £39,179 |
| All UK full-time employees | £40,911 |
On an hourly basis the picture is similar. Median hourly pay for employee plumbers and heating installers was £18.82, against £19.00 for all employees[1]. For full-time staff in the occupation, it was £19.00 an hour, up 3.7%[1].
How to read these figures
A median is the middle value: half of employees earn more and half earn less. It is not the going rate for any particular role. The occupation group mixes newly qualified plumbers, experienced gas engineers, commercial pipefitters and installers on every kind of employer, from small domestic firms to large contractors.
- Experienced gas engineers with a full range of domestic categories usually earn above the occupation median.
- Those with commercial gas, unvented, or heat pump design skills are typically higher still.
- Newly qualified plumbers without gas registration usually sit below it.
- Pay in London and the South East tends to be higher, reflecting living costs and competition.
- Overtime and on-call payments can add significantly to total earnings and are not always captured in basic pay comparisons.
Remember the self-employed alternative. About 48% of UK plumbers and heating installers were self-employed in July 2025 to June 2026[2]. Experienced engineers compare your offer with what they could make on their own, minus the admin, van costs and risk. Your package needs to be attractive against that, not just against other employers.
Benchmark against your local market
Collect live adverts
Gather ten to twenty current adverts for similar roles within 30 to 40 minutes' drive of your base. Note basic pay, overtime, on-call, van and hours.
Group them by role
Separate plumbers, domestic gas engineers, senior engineers and heat pump installers. Mixing them produces a meaningless average.
Compare like with like
Adjust for hours and on-call. A higher salary with heavy on-call and long days may be worth less than a lower one with fixed hours.
Talk to your engineers
Ask what offers they hear about from friends in the trade. They know the local market better than any job board.
Decide your position
Choose whether to pay at, above or slightly below the local market, and what you offer instead if you are below it.
Repeat yearly
Set a date each year to refresh the benchmark before pay reviews.
A simple pay structure by grade
Small firms often pay whatever they agreed when each person joined, which leads to unfair gaps and resentment. A written structure fixes this. It does not need to be complex: a handful of grades with clear criteria and a pay range for each.
| Grade | Typical criteria | How pay is set |
|---|---|---|
| Apprentice | On an apprenticeship programme | At least the legal apprentice or age rate, with rises at milestones |
| Improver | Qualified or near-qualified plumber, not yet working alone on all jobs | Between apprentice and plumber, rising as competence is signed off |
| Plumbing and heating engineer | Works unsupervised on plumbing and heating jobs | Around the occupation median for your area |
| Gas engineer | Gas Safe registered for domestic categories | Above the plumbing grade, reflecting registration and responsibility |
| Senior or specialist engineer | Commercial gas, heat pumps, unvented, or supervises others | Top of the local range, plus responsibility payments |
Write down what moves someone from one grade to the next: a qualification, a period of signed-off work, or taking on supervision. Engineers who can see the route are more likely to stay and train than those who have to negotiate every rise.
The legal floor and the cost on top
Some roles in a plumbing firm, such as mates, labourers and apprentices, sit close to the legal minimum. The National Living Wage for workers aged 21 and over is £12.71 an hour from April 2026, rising to £13.21 from April 2027[3]. The apprentice rate is £8 an hour from April 2026[3]. These increases push up the bottom of your structure every year, and if you do not move the grades above, the gaps between them shrink. 38% of SME employers named the National Living Wage as a major obstacle in 2025, up 7 percentage points on 2024[4].
When you budget, add the costs that follow pay. Employers pay 15% National Insurance on earnings above £5,000 a year[5], and must pay at least 3% into a workplace pension for eligible staff[6]. Overtime and on-call payments carry the same on-costs.
Overtime, call-out and standby pay
In heating, a large share of earnings can come from outside normal hours, and it is where engineers compare employers most closely. Set out in writing:
- The overtime rate and when it applies, for example after eight hours in a day or on Saturdays.
- A standby payment for each day or week on call, whether or not a call comes in.
- A call-out payment per attendance, with a minimum paid time.
- Rules on rest after a late call, so engineers are not expected back at 8am after finishing at 2am.
- How bank holidays and Christmas cover are paid and shared.
Clear on-call terms prevent disputes and make your offer easier to compare. See our guide to standby pay for engineers for more detail.
Paying self-employed subcontractors
Many firms use self-employed engineers for busy periods or for specialist jobs. Day rates for subcontractors are not covered by the official employee pay figures, so the only reliable benchmark is what local subcontractors are charging now. Ask two or three you trust, and compare like with like: some rates include the subbie's own van and tools, others assume you provide them.
When comparing a subcontractor's day rate with an employee's pay, remember what the subbie is covering themselves: no holiday pay, no sick pay, no pension contribution from you, their own insurance and their own quiet weeks. A day rate that looks high next to an employee's hourly wage may be close to the true cost of employment once those are added. The reverse also applies: if you use the same subcontractor every day, on your terms and in your van, they may in law be a worker or employee, with the rights that brings.
Fairness and transparency
Pay secrecy rarely survives in a small team. Engineers talk, and an unexplained gap between two people doing the same job causes more damage than a modest overall wage. Men and women doing equal work must receive equal pay under equality law, and the same principle of fairness applies to any unexplained difference. A grade structure with written criteria is your best defence, because it shows each difference has a reason.
You do not have to publish everyone's salary. But you should be able to explain to any engineer which grade they are on, what the range is, and what they need to do to move up. If you cannot, the structure needs work.
Running a fair annual pay review
Pick one month each year, ideally before the winter peak so nobody leaves in October, and review everyone at once. Look at the updated ONS figures, your local benchmark, the new legal minimums and the business's results. Then apply the structure: everyone gets the general increase the business can afford, and those who have moved up a grade get the grade change on top.
Example (fictional figures): a five-engineer firm in Nottingham reviews pay in September. It moves its apprentice to the next rate as she enters her second year, gives every engineer a general rise in line with the market, and moves one engineer to the gas grade after he completes his ACS assessments. Because the grades are written down, nobody needs to ask why a colleague received more.
For more, read bonus and commission schemes for engineers, apprentice pay and funding and how to recruit gas engineers.
Frequently asked questions
What is the average salary for a plumber in the UK?
Median gross annual pay for full-time employee plumbers and heating installers was £39,179 in 2026 (provisional)[1]. Pay varies with gas qualifications, region and overtime.
Do gas engineers earn more than plumbers?
Usually, because Gas Safe registration adds responsibility and demand. The official figures group them together, so use local adverts to see the gap in your area.
What is the minimum I can pay a plumber's mate?
At least the legal minimum for their age. The National Living Wage for those aged 21 and over is £12.71 an hour from April 2026[3].
How often should I review engineer pay?
At least once a year, at a fixed time, using updated official data, a local benchmark and your own pay structure.
References
Office for National Statistics (2026). Annual Survey of Hours and Earnings 2026 provisional, Table 14 (occupation by 4-digit SOC 2020) (opens in a new tab) ↑
Office for National Statistics (Nomis) (2026). Annual Population Survey - regional - occupation (SOC2020) by sex by employment type, via Nomis (opens in a new tab) ↑
GOV.UK (2026). National Minimum Wage and National Living Wage rates (opens in a new tab) ↑
Department for Business and Trade (GOV.UK) (2025). Longitudinal Small Business Survey 2025: SME employers (businesses with 1 to 249 employees) (opens in a new tab) ↑
GOV.UK (2026). Rates and thresholds for employers 2026 to 2027 (opens in a new tab) ↑
GOV.UK (2026). Workplace pensions: what you, your employer and the government pay (opens in a new tab) ↑