Emergency out of hours

Running an out-of-hours rota in a small heating firm

How a small heating firm can run a fair out-of-hours rota: team size, rota patterns, a backup, rest rules, swaps, bank holidays and a weekly handover.

Ava research teamPublished 7 min read

On this page
  1. What a rota has to achieve
  2. How many people you need
  3. Rota patterns compared
  4. Always name a backup
  5. Rest rules shape the pattern
  6. Fairness: swaps, holidays and bank holidays
  7. The weekly handover
  8. Tools that keep it simple
  9. Subcontractors and self-employed engineers
  10. Look after the people on the rota
  11. Measure how the rota is going
  12. Example: from owner-only to a four-person rota
  13. Frequently asked questions
  14. References

Key takeaways

  • A rota needs three things: enough people that nobody is on call too often, a named backup for every shift, and rest built in after late call-outs.
  • Rest rules shape the pattern: workers are entitled to 11 hours' rest between working days and 24 hours' uninterrupted rest each week, or 48 hours a fortnight[1].
  • Weekly working time must not exceed 48 hours on average, normally over 17 weeks, unless the worker opts out[2]; on-call call-outs count towards it.
  • Make swaps, holidays and bank holidays rule-based and visible, so fairness is not a matter of who asks loudest.
  • Hand over the rota, the van stock and open jobs every week, in writing.

What a rota has to achieve

An out-of-hours rota turns 'the owner answers the phone at night' into a service that does not depend on one person. Most plumbing and heating firms are small: around 95% of registered firms in the trade have fewer than ten employees[3]. That makes rotas fragile. One engineer leaving or going off sick can push everyone else from one week in four to one week in three. A rota that works in a small firm has to be fair, easy to swap, protective of rest and simple enough that nobody needs to check a spreadsheet at 11pm to know who is on.

How many people you need

Rota size and frequency in a small plumbing and heating firm
People on the rotaTypical patternHow often each is on call
One (owner)Owner covers set evenings only; referral partner on other nightsAs often as the owner chooses; set a limit
TwoAlternate weeks, with a partner firm covering holidaysEvery other week: hard to sustain
ThreeOne week in three, Monday to MondayWorkable with standby pay and lighter mornings
Four or moreOne week in four, or split weekday and weekend shiftsComfortable; room for swaps and holidays

Below three people, most firms either limit the hours they offer or share cover with a trusted partner firm, for example alternate weekends. Being on call every other week for months tends to wear people out, and tired engineers make mistakes on both night jobs and the next day's work.

Rota patterns compared

Common out-of-hours rota patterns
PatternHow it worksStrengthsWeaknesses
Week onOne engineer covers seven nights, then hands overSimple; one handover a weekA busy week is exhausting
Weekday and weekend splitOne person covers Monday to Thursday nights, another Friday to SundaySpreads the heaviest daysTwo handovers a week
Nightly rotationDifferent engineer each nightNo long stretchesMany handovers; harder to plan stock
Primary and backupAny of the above, plus a named second personCovers illness and double call-outsBackup needs some recognition or pay

Week-on is the most common in small firms because it is easy to understand. Its weakness shows in cold snaps, when one engineer may be out every night. A weekday and weekend split, or a rule that a second person takes over after two late finishes in a row, takes the edge off without much extra admin.

Always name a backup

Every shift needs a backup: the person called if the primary does not answer within a set time, is already on another job, or falls ill. Name them on the rota, tell them in advance, and agree what they get for being available. Without a named backup, the default backup is the owner, every week, forever. Your call routing should know the order too: primary first, backup second, then a clear message to the customer if neither can attend.

Rest rules shape the pattern

Employees on an out-of-hours rota are still entitled to rest. Workers have the right to 11 hours' rest between working days, an uninterrupted 20-minute break when they work more than six hours, and either 24 hours' uninterrupted rest each week or 48 hours a fortnight[1]. Weekly working time must not exceed 48 hours on average, normally averaged over 17 weeks, unless the worker chooses to opt out[2]. Plumbers already work median paid hours of 40 a week[4], so frequent call-outs can push some engineers close to that average.

Minimum rest entitlements for workersPlus a 20-minute break when working more than six hours
Minimum rest entitlements for workersColumn chart. Rest between working days: 11 hours; Uninterrupted weekly rest: 24 hours; Or uninterrupted rest per fortnight: 48 hours.0 hours20 hours40 hours60 hoursRest between working days: 11 hours11 hoursRest between working daysUninterrupted weekly rest: 24 hours24 hoursUninterrupted weekly restOr uninterrupted rest per fortnight: 48 hours48 hoursOr uninterrupted rest perfortnightMinimum rest entitlements for workersColumn chart. Rest between working days: 11 hours; Uninterrupted weekly rest: 24 hours; Or uninterrupted rest per fortnight: 48 hours.Rest between working daysRest between working days: 11 hours11 hoursUninterrupted weekly restUninterrupted weekly rest: 24 hours24 hoursOr uninterrupted rest per fortnightOr uninterrupted rest per fortnight: 48 hours48 hours

Source: GOV.UK, 2026[1]

Show the data
ItemValue
Rest between working days11 hours
Uninterrupted weekly rest24 hours
Or uninterrupted rest per fortnight48 hours

In practice, build the rest into the diary. If an engineer finishes a call-out at midnight, their first job the next day should not start at 7am. Many firms leave the on-call engineer's mornings lighter during their week, or give them the option of a later start after any call-out finishing after a set time. Whether standby time itself counts as working time depends on how restricted the engineer is, which the guide on on-call engineers and the Working Time Regulations covers.

Fairness: swaps, holidays and bank holidays

  • Publish the rota at least two months ahead so people can plan family life around it.
  • Allow swaps between engineers, but require both names and a note to the office, so the routing is updated.
  • Plan holidays first, then build the rota around them. Almost all workers are entitled to 5.6 weeks' paid holiday a year[5], and nobody should have to give up holiday to cover a gap.
  • Rotate bank holidays and the Christmas period by turn, and keep a record so the same person is not always on at New Year.
  • Keep a tally of call-outs per person across the season. If one engineer is consistently busier, rebalance.
  • Agree what happens when someone is ill on their on-call week: the backup steps up, and the missed week is not simply added to their next turn.

The weekly handover

  1. Confirm who is on

    Primary and backup for the coming week, with any swaps, confirmed in the team chat or job system.

  2. Update the routing

    Check the phone system or call handling service is pointing at the right phones from the start time.

  3. Check the van

    Restock the on-call kit and confirm parts used last week have been reordered.

  4. Pass on open jobs

    Any overnight jobs that need follow-up, any customer expecting a call, any property made safe but not repaired.

  5. Note the forecast

    If cold weather is coming, agree in advance when the backup will be called in to help.

Tools that keep it simple

The rota itself can live in a shared calendar or your job-management software. What matters is that one place holds the truth and the phone routing follows it. Use time-of-day rules on your phone system to switch to the out-of-hours route automatically, and keep a short list of who is on call where the office and any answering service can see it. If someone swaps, they change it in that one place. Avoid rotas that live in one person's head or on a whiteboard in an office nobody visits at weekends.

Subcontractors and self-employed engineers

Nearly half of the UK's plumbers and heating installers are self-employed[6], and many firms use subcontractors to fill rota gaps. Put the arrangement in writing: which nights they cover, how they are paid for availability and call-outs, how jobs and customer details are passed to them and back, and who owns the customer afterwards. Make sure they follow your emergency definition and safety scripts, and that customers receive the same confirmation and pricing information as from your own engineers.

Look after the people on the rota

On-call weeks affect families as much as engineers: cancelled plans, phones by the bed and a partner woken at 2am. People stay on a rota longer when the firm takes that seriously. Ask how the rota is working at least once a season, not only when someone complains. Give the on-call engineer the authority to say no to calls that fall outside your emergency definition, so they are not pressured into attending a dripping tap at midnight. Make sure every night call-out has a check-in arrangement for lone working, and that the engineer knows they can leave a property where they feel unsafe. Thank people after a hard week; a busy cold snap is when good engineers decide whether they want to stay.

Measure how the rota is going

Keep a short record for each on-call week: number of calls received, call-outs attended, the latest finish time, and any call where the primary did not answer and the backup was used. Over a season these figures show whether the load is fair between engineers, whether certain nights are consistently busy, and whether the backup is being called so often that the rota needs a second person on cold nights. They also give you the real call-out numbers you need to price the service, rather than estimates from memory.

Example: from owner-only to a four-person rota

Example: a fictional heating firm's owner had covered every evening for three years. With two engineers and an apprentice now qualified, the firm moves to a four-person week-on rota with a named backup, a standby allowance and later starts after late call-outs. Bank holidays rotate by turn, and swaps are logged in the shared calendar, which the phone routing reads. In the first winter the owner is on call one week in four instead of every night, call-outs are spread more evenly than expected, and the team agrees to add a weekday and weekend split during cold snaps. For how to pay for availability, see standby and call-out pay models.

Frequently asked questions

How many engineers do I need for an on-call rota?

Three is the practical minimum for a sustainable weekly rota; four or more gives room for swaps and holidays. With fewer, limit your hours or share cover with a partner firm.

Do on-call engineers still get daily rest?

Yes. Workers are entitled to 11 hours' rest between working days, so plan later starts after late call-outs.

Should the backup engineer be paid?

It is fairer and more reliable if they are recognised for being available, even at a lower rate than the primary. Agree it in writing.

How do I share bank holidays fairly?

Rotate them by turn, publish the rota well ahead and keep a record across years so the same person is not always on at Christmas or New Year.

References

  1. GOV.UK (2026). Rest breaks at work (opens in a new tab) ↑

  2. GOV.UK (2026). Maximum weekly working hours (opens in a new tab) ↑

  3. Office for National Statistics (Nomis) (2026). UK Business Counts - enterprises by industry and employment size band (SIC 2007 class 43.22), via Nomis (opens in a new tab) ↑

  4. Office for National Statistics (2026). Annual Survey of Hours and Earnings 2026 provisional, Table 14 (occupation by 4-digit SOC 2020) (opens in a new tab) ↑

  5. GOV.UK (2026). Holiday entitlement (opens in a new tab) ↑

  6. Office for National Statistics (Nomis) (2026). Annual Population Survey - regional - occupation (SOC2020) by sex by employment type, via Nomis (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo