Emergency out of hours

Setting emergency and out-of-hours call-out rates

Build emergency and out-of-hours call-out rates from standby cost, enhanced pay, on-costs, travel and next-day disruption, with a worked example.

Ava research teamPublished 7 min read

On this page
  1. Why guesswork fails
  2. Start from pay data
  3. The cost layers
  4. Worked example
  5. Structure the charge so customers understand it
  6. Agree the price on the phone
  7. Check against the market
  8. If you are a sole trader
  9. Common pricing mistakes
  10. Waivers, discounts and goodwill
  11. Set your rate in five steps
  12. When to review
  13. Frequently asked questions
  14. References

Key takeaways

  • Price emergency work from what the cover costs you, not from what the firm down the road charges.
  • Start with pay: the median hourly pay of employee plumbers and heating installers was £18.82 in 2026[1], before enhancements and employer costs.
  • Add the layers: standby pay, enhanced call-out pay, employer National Insurance at 15% above the threshold[2], pension, holiday, van and travel, and the cost of a disrupted next day.
  • Divide by a realistic number of paid call-outs, not the number you hope for.
  • Agree the rate before the engineer sets off. Where no price is agreed, the customer only has to pay a reasonable price[3].

Why guesswork fails

Many firms set their emergency rate by looking at a few competitors' websites and picking a number in the middle. The trouble is that competitors' costs, staffing and call volumes are not yours. A sole trader covering nights alone has a very different cost base from a firm paying three engineers standby on a rota. If your rate does not cover the true cost of being available, the emergency service quietly loses money, and engineers start resenting on-call weeks that do not feel worth it.

The approach here is to build the rate up from your own costs, then check it against the market. It takes an evening with a spreadsheet, and you only need to revisit it once a year or when pay rates change.

Start from pay data

Pay is the largest cost, and it is rising. The median gross weekly pay of full-time employee plumbers and heating and ventilating installers was £782.50 in April 2026, up 4.3% on 2025[4]. Median hourly pay for all employee plumbers was £18.82, against £19.00 for all UK employees[1]. The legal floor is the National Living Wage, £12.71 an hour for workers aged 21 and over from April 2026[5]. Experienced engineers willing to give up evenings usually earn well above these medians, and out-of-hours work normally carries an enhancement on top.

Hourly pay benchmarks, 2026ONS ASHE 2026 provisional; National Living Wage from GOV.UK
Hourly pay benchmarks, 2026Bar chart. National Living Wage (21 and over, from April): £12.71; Median employee plumbers and heating installers: £18.82; Median for all UK employees: £19.National Living Wage (21 and over, from April)National Living Wage (21 and over, from April): £12.71£12.71Median employee plumbers and heating installersMedian employee plumbers and heating installers: £18.82£18.82Median for all UK employeesMedian for all UK employees: £19£19Hourly pay benchmarks, 2026Bar chart. National Living Wage (21 and over, from April): £12.71; Median employee plumbers and heating installers: £18.82; Median for all UK employees: £19.National Living Wage (21 and over, fromApril)National Living Wage (21 and over, from April): £12.71£12.71Median employee plumbers and heatinginstallersMedian employee plumbers and heating installers: £18.82£18.82Median for all UK employeesMedian for all UK employees: £19£19

Source: Office for National Statistics, 2026[1]

Show the data
ItemValue
National Living Wage (21 and over, from April)£12.71
Median employee plumbers and heating installers£18.82
Median for all UK employees£19

The cost layers

Cost layers to include in an emergency call-out rate
LayerWhat it coversHow to estimate it
Standby payPaying an engineer to be available, whether or not the phone ringsYour standby allowance per night or week, times nights covered
Call-out payEnhanced hourly pay for time actually worked out of hoursYour enhancement rate times average hours per call-out, including travel
Employer on-costsNational Insurance, pension, holiday pay on the extra earningsAdd the percentages to all standby and call-out pay
Van and travelFuel, wear and longer night journeysAverage miles per call-out times your cost per mile
Stock and consumablesParts used on the night that are not billed separately, and restocking timeA small amount per call-out from past jobs
Next-day disruptionLost or moved jobs after a late finishValue of the hours lost the next morning, on average
Phone handlingWho answers and triages out-of-hours callsYour overflow or answering cost spread over call-outs
MarginProfit and risk for unsocial workA percentage you decide on top

Employer on-costs are easy to forget. Employers pay 15% secondary Class 1 National Insurance on earnings above £5,000 a year[2], at least 3% employer pension contributions under auto-enrolment[6], and almost all workers are entitled to 5.6 weeks' paid holiday a year[7], which regular overtime and standby payments can affect. Ask your accountant how these apply to your pay structure.

Worked example

Example: a fictional four-engineer firm covers weekday evenings until 10pm and weekend days. It pays each engineer a weekly standby allowance when on call and an enhanced hourly rate for call-out time. From last winter's records, it expects about six paid emergency call-outs a week in the busy months, averaging two hours each including travel.

Example: fictional figures for building an out-of-hours call-out price
ItemPer week (example)Per call-out (example)
Standby allowance£150£25
Enhanced pay, 2 hours at £30£360£60
Employer on-costs on the above, about 20%£102£17
Van and travel£90£15
Next-day disruption£120£20
Phone handling and admin£60£10
Cost per call-out—£147
Margin at 30%—£44
Price for a two-hour call-out, before parts and VAT—£191

Example: in this fictional case, the firm sets a call-out charge covering the first hour and an hourly rate after that, so that a typical two-hour job lands close to the built-up figure. In quiet weeks with fewer call-outs, the standby cost per job rises, which is why the firm checks its numbers against the whole season rather than a single week.

Structure the charge so customers understand it

  • A call-out charge that includes a first period of work, such as the first hour, so small jobs are not a shock.
  • A clear hourly rate after that, charged in stated increments.
  • Parts at a stated basis, such as cost plus a published margin.
  • Separate tiers if you need them: evenings, nights, weekends and bank holidays. Keep it to two or three tiers at most.
  • A note on what is not included, such as drain jetting or specialist kit, which you quote separately.
  • Whether VAT is included. Consumers expect prices including VAT.

Publish the structure on your emergency page. Customers comparing firms late at night respond better to a clear structure than to 'prices on request'.

Agree the price on the phone

Where no price is agreed for a service, the Consumer Rights Act 2015 says the consumer must pay a reasonable price[3]. Arguing about what is reasonable after midnight is a poor position for any trader. Agree the basis before the engineer sets off and confirm it in writing, together with the customer's express request for you to start straight away within the cancellation period[8].

Script: 'Our evening call-out is [amount] including the first hour, then [amount] for each half hour after that, plus any parts, all including VAT. The engineer will confirm the cost of any repair before starting. I'll text you those details now; can you reply to confirm you'd like us to come out tonight?'

Check against the market

Once you have a cost-based figure, look at what local competitors publish for similar hours. If you are far above them, check your assumptions: perhaps your call-out volume estimate is too low, or your standby structure is unusually generous. If you are far below, resist the temptation to undercut further. Emergency customers choose on availability, speed and trust more than on small price differences, and a rate that does not cover cover will not last a winter.

If you are a sole trader

The cost layers look different when the person on call is you. There is no standby allowance or employer National Insurance, but the cost is real: evenings you cannot plan, sleep lost to late finishes, and next-day jobs you start tired or have to move. A useful way to price it is to decide what an evening of your time is worth to you if you are available but nothing happens, then add your normal hourly charge with an out-of-hours uplift for the time you actually work. Spread the 'available' value over the call-outs you expect, just as a firm spreads standby pay. Many sole traders find that, priced honestly, a small number of evenings a week is worthwhile and seven is not, which is a useful conclusion in itself. Be realistic too about what happens when you are ill or on holiday; an emergency service with no cover needs to say so.

Common pricing mistakes

  • Pricing only the time on site and forgetting travel, which is often longer at night and at weekends.
  • Assuming a busy-week call-out volume all year, so standby costs are under-recovered in quiet weeks.
  • Leaving out the cost of the next morning, when a late finish pushes back or cancels paid work.
  • Charging one flat rate for a ten-minute valve change and a three-hour leak hunt, which feels unfair to both customers.
  • Hiding the price until the engineer arrives, which invites disputes and poor reviews.
  • Never reviewing the rate, so it falls behind rising pay and fuel costs.

Waivers, discounts and goodwill

Decide in advance when you will waive or reduce an emergency charge, so the decision is not made under pressure on a doorstep. Common choices are waiving the call-out for a fault caused by your own recent work, reducing it for existing maintenance plan customers, or offering vulnerable customers the next morning at normal rates as an explicit alternative. Write these rules down and give them to the on-call engineers, so customers are treated consistently whoever turns up.

Set your rate in five steps

  1. Gather last winter's records

    Count paid emergency call-outs per week, average hours per job including travel, and average miles.

  2. Cost the cover

    Add standby, enhanced pay, on-costs, travel, disruption and phone handling for a typical busy week.

  3. Divide realistically

    Divide by the number of paid call-outs you actually had, not the number you would like.

  4. Add margin and structure it

    Apply your margin, then turn the figure into a call-out charge plus hourly rate customers can understand.

  5. Publish, then review

    Put it on the website and phone scripts, and review every spring or when pay rates change.

When to review

Revisit the rate each spring, after the busy season, and whenever pay, standby arrangements or the National Living Wage change; it rises to £13.21 an hour from April 2027[5]. Also review it if your call-out volume changes sharply. A firm that wins a social housing contract or a letting agent's emergency work may see many more call-outs, which lowers the standby cost per job and may justify a sharper rate. For the pay side of the calculation, see standby and call-out pay for engineers.

Frequently asked questions

How do I work out an emergency call-out charge?

Add up the cost of being available (standby pay, enhanced pay, employer on-costs, travel, next-day disruption and phone handling) for a typical busy week, divide by the realistic number of paid call-outs and add a margin.

Should the call-out charge include labour?

Many firms include a first period of work, such as the first hour, then charge an hourly rate. It makes small jobs predictable for customers.

Do I have to agree the price before attending?

It is strongly advisable. Where no price is agreed, consumers only have to pay a reasonable price, which is hard to argue about after the event.

Should I charge more on bank holidays?

You can, if it is published and agreed in advance. Keep to two or three tiers so customers can understand them.

References

  1. Office for National Statistics (2026). Annual Survey of Hours and Earnings 2026 provisional, Table 14 (occupation by 4-digit SOC 2020) (opens in a new tab) ↑

  2. GOV.UK (2026). Rates and thresholds for employers 2026 to 2027 (opens in a new tab) ↑

  3. legislation.gov.uk (The National Archives) (2015). Consumer Rights Act 2015, section 51 (opens in a new tab) ↑

  4. Office for National Statistics (2026). Annual Survey of Hours and Earnings 2026 provisional, Table 14 (occupation by 4-digit SOC 2020) (opens in a new tab) ↑

  5. GOV.UK (2026). National Minimum Wage and National Living Wage rates (opens in a new tab) ↑

  6. GOV.UK (2026). Workplace pensions: what you, your employer and the government pay (opens in a new tab) ↑

  7. GOV.UK (2026). Holiday entitlement (opens in a new tab) ↑

  8. legislation.gov.uk (The National Archives) (2013). The Consumer Contracts (Information, Cancellation and Additional Charges) Regulations 2013, regulation 36 (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo