Boilers heating

Working on oil boilers: OFTEC registration and work

How OFTEC registration works for oil boiler engineers, the Approved Document J tank rules in England, and how the off-gas market is shifting.

Ava research teamPublished 7 min read

On this page
  1. Why oil work is its own market
  2. What OFTEC registration covers
  3. Choosing your registration and training
  4. Tank siting rules in England
  5. Checking whether a tank needs secondary containment
  6. Example: a tank too close to the house
  7. Running an oil round profitably
  8. The off-gas market is changing
  9. Paperwork that protects you
  10. Frequently asked questions
  11. References

Key takeaways

  • Around four million UK homes rely on heating oil or LPG and sit outside the energy price cap[1], so off-gas work is a distinct market with its own competence route.
  • OFTEC runs a competent person scheme for oil, solid fuel, electrical and renewable heating work[2]; Gas Safe registration does not cover oil.
  • Tank siting and secondary containment are where most oil jobs go wrong; Approved Document J sets the tests in England[3].
  • Oil customers are a large share of heat pump grant work[4], so learn to advise on both.

Why oil work is its own market

Around four million UK homes are not connected to the mains gas grid and rely on heating oil or LPG for heating and hot water, and neither fuel is covered by the energy price cap[1]. Those homes are mostly rural, often older and spread out, which makes them a different kind of patch: longer drives, more first-time fixes needed from van stock, tank inspections and, increasingly, conversations about heat pumps.

For a gas engineer looking to add oil, the main point is that the competence and registration are separate. Gas Safe registration covers gas work. Oil boilers, tanks and pipework sit under a different route, and the scheme most installers use is run by OFTEC. Customers rarely know the difference, so it is worth explaining on your website and your quotes which registrations you hold and for what work.

What OFTEC registration covers

OFTEC is a trade association for liquid fuel heating equipment manufacturers and training providers, and it runs a competent persons scheme for businesses and technicians approved to install and maintain oil, solid fuel, electrical and renewable heating equipment[2]. It also handles registration for other schemes, including Microgeneration Certification, TrustMark and PAS 2030[2], which matters if you want to offer heat pumps or grant-funded retrofit later.

Being registered with a competent person scheme means the homeowner does not need to get building regulations approval separately for the notifiable work you do[5]. You self-certify instead, and the scheme issues the compliance certificate. That puts the responsibility for getting the tank position, the flue and the commissioning right on your business, and the scheme can inspect your work.

Choosing your registration and training

OFTEC publishes its areas of registration and a training centre finder[2]. Match the registration to the work you actually plan to do, rather than buying the widest set of courses at once. A typical sequence for a gas engineer is to start with servicing and commissioning of oil appliances, then add installation, then tank work, gaining supervised experience at each step.

  • List the jobs you want: servicing, breakdowns, boiler swaps, full installations, tank replacements.
  • Check which OFTEC registration areas cover each job before booking a course.
  • Ask the training centre what assessed site evidence you need after the course.
  • Budget for oil-specific test kit, such as combustion analysis set up for oil, and for van stock of nozzles and filters.
  • Check your insurance covers oil work and tank pollution risks before the first job.

Tank siting rules in England

Approved Document J gives the ways of meeting requirements J6 and J7 for above-ground or semi-buried tanks of 3,500 litres or less used only for heating oil, largely by following BS 5410-1 alongside its own guidance[3]. Tanks serving private dwellings must be reasonably resistant to damage and corrosion, designed to minimise spills during filling and maintenance, have secondary containment where there is a significant pollution risk, and be labelled with what to do in a leak[3]. For tanks above 3,500 litres the Approved Document points you to the fire authority for advice[3].

Fire protection for oil storage tanks, summarised from Approved Document J Table 10[3]
Tank positionProtection usually satisfactory
Within a buildingPlace of special fire hazard, ventilated directly to outside
Less than 1,800 mm from any part of a buildingImperforate walls with 30 minutes fire resistance within 1,800 mm, protected eaves, or a fire wall
Less than 760 mm from a boundaryFire wall or boundary wall with 30 minutes fire resistance, 300 mm higher and wider than the tank
At least 1,800 mm from the building and 760 mm from a boundaryNo further provisions needed

The base matters too. A hard surface such as concrete, or paving slabs at least 42mm thick, extending at least 300mm beyond the tank perimeter, helps reduce fire risk and stops the installation becoming overgrown[3]. Put the label in a prominent position with spill advice and the Environment Agency emergency number[3].

Checking whether a tank needs secondary containment

Approved Document J treats a domestic oil installation as a significant pollution risk, needing secondary containment such as an integrally bunded tank, if any one of the conditions below applies[3]. Work through them on every survey and record the answer with photos.

  1. Capacity

    Is the total capacity more than 2,500 litres[3]?

  2. Water nearby

    Is the tank within 10m of inland freshwaters or coastal waters[3]?

  3. Drains

    Could a spill run into an open drain or a loose-fitting manhole cover?

  4. Drinking water

    Is it within 50m of a well, borehole or spring[3]?

  5. Run-off

    Could oil reach any of those waters by running across hard ground?

  6. Vent visibility

    Can the tank vent pipe outlet be seen from the intended filling point? If not, containment is needed.

Example: a tank too close to the house

Example (fictional): a farmhouse has a single-skin plastic tank 1.2m from the kitchen wall, next to a loose manhole cover. The boiler service is booked, but the engineer notes the tank is inside the 1,800mm zone and that a spill could reach the drain.

The engineer explains both points, photographs them and quotes two options: relocate a new bunded tank at least 1,800mm from the house and 760mm from the boundary, or keep the position with a bunded tank and a fire wall. The customer chooses relocation. The quote also notes that, because the household is off the gas grid, it may qualify for the higher heat pump grant, and offers a survey if they want to compare.

Running an oil round profitably

Oil customers are spread out, so travel time decides whether the work pays. Most firms that do well with oil group their servicing geographically, book the summer months heavily and keep winter capacity for breakdowns. A breakdown on an oil boiler often comes down to a handful of parts, so the van stock you carry decides whether you fix it first time or drive back the next day.

  • Group service bookings by village or postcode and offer customers a fixed week rather than a fixed day.
  • Carry the common consumables for the boiler makes on your round, and record what you used on each job so stock reflects real demand.
  • Check the tank, the fire valve, the filter and the supply line at every service, not only the boiler.
  • Note the tank's age, condition and position on the service record, so a replacement conversation starts early rather than after a leak.
  • Ask about the customer's plans: a household thinking about a heat pump may want advice before they spend money on a new tank.

Treat the tank as part of the job. Customers often assume the boiler engineer has checked it, and a short written note on its condition, even when nothing needs doing, is valuable evidence if a problem appears later.

The off-gas market is changing

Oil customers are a major part of heat pump grant work. Under the Boiler Upgrade Scheme, 18% of funded heat pump and biomass installations replaced oil systems[4], and 17,184 paid installations had displaced oil by the end of September 2026[4]. Until March 2027, homes heated by oil or LPG with no mains gas connection can get an extra £1,500 towards an air or ground source heat pump[6]. The scheme covers England and Wales only; Scotland has its own loans and grants and Northern Ireland's Boiler Replacement Scheme is closed[7].

Previous heating in Boiler Upgrade Scheme installationsShare of funded heat pump and biomass installations, to September 2026
Previous heating in Boiler Upgrade Scheme installationsBar chart. Replaced gas: 55%; Replaced oil: 18%; No previous heating system: 13%.Replaced gasReplaced gas: 55%55%Replaced oilReplaced oil: 18%18%No previous heating systemNo previous heating system: 13%13%Previous heating in Boiler Upgrade Scheme installationsBar chart. Replaced gas: 55%; Replaced oil: 18%; No previous heating system: 13%.Replaced gasReplaced gas: 55%55%Replaced oilReplaced oil: 18%18%No previous heating systemNo previous heating system: 13%13%

Source: Department for Energy Security and Net Zero, 2026[4]

Show the data
ItemValue
Replaced gas55%
Replaced oil18%
No previous heating system13%

OFTEC also campaigns for HVO, a low-carbon liquid fuel it describes as a direct replacement for heating oil[2]. Whichever direction a customer takes, the firm that can service their oil boiler today and explain the alternatives honestly is the one they will call back.

Paperwork that protects you

  • Commissioning record and combustion readings for every oil appliance.
  • Competent person scheme notification, so the customer receives a compliance certificate.
  • Tank survey sheet: distances, base, containment decision and photos.
  • Leak label fitted and photographed.
  • Written advice where an existing tank is non-compliant but the customer declines replacement.

Oil work rewards tidy records. A tank leak can be expensive for the customer and the insurer, and your survey sheet is what shows that you identified the risk, explained it and recorded the customer's choice.

Frequently asked questions

Does Gas Safe registration let me work on oil boilers?

No. Gas Safe covers gas work. Oil work is covered by a separate competent person route, most commonly OFTEC registration.

When does an oil tank need a bund?

In England, Approved Document J treats the installation as a significant pollution risk if it is over 2,500 litres, near water, near drains, near drinking-water sources, can run off to water, or the vent cannot be seen from the fill point.

How far must an oil tank be from the house?

At least 1,800mm from the building and 760mm from a boundary needs no further fire protection. Closer than that needs fire-resisting construction or a fire wall.

Can oil customers get a heat pump grant?

In England and Wales, yes, through the Boiler Upgrade Scheme, with an extra £1,500 for off-gas homes until March 2027.

References

  1. Heating and Hotwater Industry Council (HHIC) (2026). HHIC and OFTEC urge Government to back hybrid heating systems to support off-grid households (opens in a new tab) ↑

  2. OFTEC (2026). OFTEC: oil, solid fuel and renewable heating technologies (opens in a new tab) ↑

  3. GOV.UK (Ministry of Housing, Communities and Local Government) (2022). Approved Document J: Combustion appliances and fuel storage systems (2010 edition incorporating 2010, 2013 and 2022 amendments) (opens in a new tab) ↑

  4. Department for Energy Security and Net Zero (2026). Boiler Upgrade Scheme (BUS) monthly statistics: England and Wales, September 2026 (opens in a new tab) ↑

  5. GOV.UK (2026). Building regulations approval (opens in a new tab) ↑

  6. GOV.UK (2026). Apply for the Boiler Upgrade Scheme: what you can get (opens in a new tab) ↑

  7. GOV.UK (2026). Apply for the Boiler Upgrade Scheme (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo