Marketing leads

How much should a plumbing firm spend on marketing?

Set a marketing budget for a plumbing or heating firm from capacity, growth goals and cost per job, then test channels in small, measured steps.

Ava research teamPublished 7 min read

On this page
  1. Why percentage rules do not fit most trade firms
  2. Where most firms sit
  3. Build the budget from the bottom up
  4. Budgets by growth goal
  5. Free and low-cost channels come first
  6. If the budget is very small
  7. Testing channels in small steps
  8. Seasonal budgeting for heating firms
  9. Review the budget every quarter
  10. Frequently asked questions
  11. References

Key takeaways

  • Start from capacity and goals, not a percentage someone quoted: how many more jobs can you take, of which type, at what margin?
  • The largest group of plumbing and heating enterprises turns over £100,000 to £249,000 a year[1], so most budgets are small and must be spent carefully.
  • Watch thresholds that change your maths, such as VAT registration above £90,000 taxable turnover[2].
  • Test one channel at a time with a fixed budget and review date, and move money towards the lowest cost per booked job.

Why percentage rules do not fit most trade firms

Ask how much to spend on marketing and you will often hear a rule of thumb: a fixed share of turnover. The problem is that such rules come from businesses with very different economics. A plumbing and heating firm is limited by engineer hours, not by stock. If the diary is already full in January, more marketing spend in January mostly buys calls you will have to turn away. If the diary is half-empty in June, the same spend might pay for itself many times over.

So the better question is: how many more jobs of each type do you want, when, and what are you willing to pay to win each one? Answer that and the budget follows.

Where most firms sit

Most of the trade is small. In 2026, 19,630 UK plumbing and heating enterprises, the largest turnover group at about 41%, had annual turnover of £100,000 to £249,000[1], and another 13,030 turned over £50,000 to £99,000[3]. Only 1,880 turned over £2 million or more[4].

UK plumbing and heating enterprises by annual turnover, 2026Selected turnover bands; other bands not shown
UK plumbing and heating enterprises by annual turnover, 2026Column chart. £50k to £99k: 13,030; £100k to £249k: 19,630; £2m or more: 1,880.05,00010,00015,00020,000£50k to £99k: 13,03013,030£50k to £99k£100k to £249k: 19,63019,630£100k to £249k£2m or more: 1,8801,880£2m or moreUK plumbing and heating enterprises by annual turnover, 2026Column chart. £50k to £99k: 13,030; £100k to £249k: 19,630; £2m or more: 1,880.05,00010,00015,00020,000£50k to £99k: 13,03013,030£50k to£99k£100k to £249k: 19,63019,630£100k to£249k£2m or more: 1,8801,880£2m ormore

Source: Office for National Statistics (Nomis), 2026[1]

Show the data
ItemValue
£50k to £99k13,030
£100k to £249k19,630
£2m or more1,880

For a firm turning over a couple of hundred thousand pounds, a few hundred pounds a month on marketing is a meaningful sum, and each channel has to justify itself. The good news is that 80% of construction SME employers reported a profit or surplus in their last financial year[5], so most firms have some room to invest, provided they measure what they get back.

Thresholds matter too. A business must register for VAT if its taxable turnover over the last 12 months goes over £90,000[2]. If your growth plan takes you over that line, your prices to domestic customers effectively rise by the VAT you must charge, or your margin falls, and your marketing maths should reflect that.

Build the budget from the bottom up

  1. Set the goal in jobs

    Write down how many extra jobs per month you want for each type: repairs, services, replacements, bathrooms. Be realistic about engineer hours.

  2. Find your cost per booked job

    Use past data by channel if you have it. If not, start with a cautious estimate and plan to replace it with real figures after the first test.

  3. Multiply

    Extra jobs times cost per job gives the monthly budget needed to hit the goal through paid channels.

  4. Check against margin

    Make sure the cost per job is well below the gross margin each job leaves. If it is not, lower the goal or find a cheaper channel.

  5. Add fixed costs

    Add website hosting, listings, review tools, printing and any agency fees that you pay regardless of results.

  6. Add a test budget

    Set aside a small amount each quarter to try one new channel, with a clear stop date.

Budgets by growth goal

Different goals need different levels and kinds of spend. The table below shows three fictional starting points to illustrate the approach. Replace the figures with your own.

Example marketing budgets by growth goal (fictional figures)
Goal (Example)Extra jobs a monthAssumed cost per jobMonthly paid budgetWhere to spend
Hold steady0 to 5 (replace lost customers)£40 for repairs£200 or lessBusiness Profile, reviews, referrals, existing listings
Fill quiet months10 to 15 in summer only£60 for a mix of jobs£600 to £900 in May to SeptemberSearch ads for replacements and servicing, summer offers to past customers
Grow with a new engineer30 or more, year round£70 blended£2,100 or moreSearch ads, call ads, a directory tested for three months, referral scheme

Example: the 'grow with a new engineer' row assumes the firm needs enough booked work to keep an extra engineer busy within a few months. If the engineer's employment costs are known, the owner can check that the extra jobs cover both wages and marketing before hiring.

Free and low-cost channels come first

Before paying for leads, make sure the free channels are working. They cost time rather than money, and they make paid channels perform better.

  • A complete Google Business Profile with the right categories, service area, photos and regular reviews.
  • Apple Maps and Bing listings with matching details.
  • A website with clear service pages and a phone number that works on mobile.
  • A routine for asking every satisfied customer for a review.
  • Servicing reminders to past customers, where you have consent or the soft opt-in applies.
  • Referral cards or a simple refer-a-friend scheme.

Answering the phone is part of the budget. Spending more on ads while a large share of calls go unanswered is the most common way trade firms waste marketing money. Fix answering first.

If the budget is very small

Many sole traders and two-person firms have little or no cash to spare for marketing. That does not mean doing nothing; it means spending time where it brings the most return and money only where it is measured. A sensible order for a firm with almost no budget:

  1. Ask every happy customer for a review on the day of the job, with a direct link. It costs nothing and helps every other channel.
  2. Send a short note to past customers before their boiler service is due, where you have their consent or the soft opt-in applies.
  3. Leave a card with every engineer visit, and make it easy for customers to pass your number to a neighbour.
  4. Spend one evening a quarter fixing listings and adding recent job photos to your Business Profile.
  5. Only then put a small, fixed amount into one paid channel, tracked from the first day, and review it after three months.

Example: a fictional sole trader in Lincoln spends nothing on ads for six months, asks for a review after every job and sends servicing reminders to past customers. Reviews rise steadily and repeat servicing fills quiet weeks. When the owner later tests a modest search campaign, it performs better than it would have done six months earlier, because the profile people see after clicking is stronger.

Testing channels in small steps

Treat every new channel as a test with a beginning, a budget and an end. A directory membership, a lead website or a new ad campaign gets a fixed period (usually three months, longer for replacement-heavy work), a fixed spend and a review date in the diary. At the review, compare cost per booked job with your other channels and with your ceiling. Keep, change or stop.

  1. Change one thing at a time so you can tell what made the difference.
  2. Track leads and booked jobs by source from day one.
  3. Avoid long contracts for untested channels. If a twelve-month term is the only option, negotiate a shorter trial or treat it as a bigger, riskier decision.
  4. Compare like-for-like seasons where possible.
  5. Write down the result and the decision, even if the decision is to stop.

Seasonal budgeting for heating firms

Plumbing and heating demand rises sharply in winter, when breakdowns peak and diaries fill without much help. That is when paid repair campaigns cost most and add least for a fully booked firm. Many heating firms do better by spending less on repair leads in mid-winter, more on replacements and servicing in late summer and autumn, and using quiet months to ask past customers for reviews and referrals.

Example: a fictional two-engineer firm in Bath sets a lower paid budget from December to February, when the diary fills from existing customers, and a higher one from May to October for replacements and boiler servicing. Over the year it spends roughly the same total but books more profitable work.

Review the budget every quarter

Each quarter, look at cost per booked job by channel, the diary for the next three months and any changes in capacity (an engineer joining or leaving, a van off the road). Adjust the budget up or down to match. For the sums behind each channel, use how to calculate your cost per lead and cost per job. To turn the budget into a plan, see a one-page marketing plan for a heating company, and for one common directory decision, is Checkatrade worth it for a plumber? The reports that feed this review are covered in Google Analytics for trades.

Frequently asked questions

What percentage of turnover should a plumber spend on marketing?

There is no single right percentage. Work from how many extra jobs you want, what each booked job costs to win by channel and the margin each job leaves. That gives a budget that fits your capacity.

Is it worth spending on marketing when I am already busy?

Spend enough to keep reviews, listings and past-customer contact going, and to shape the work you want (for example replacements over small repairs). Cut paid repair leads you cannot take.

How do I test a new marketing channel?

Give it a fixed budget and period, usually three months, track leads and booked jobs by source and compare cost per booked job with your other channels at a set review date.

Does VAT registration affect my marketing budget?

Indirectly. Once taxable turnover goes over £90,000 you must register[2], which changes your prices or margins and therefore what you can afford to pay per job.

References

  1. Office for National Statistics (Nomis) (2026). UK Business Counts - enterprises by industry and turnover size band (SIC 2007 class 43.22), via Nomis (opens in a new tab) ↑

  2. GOV.UK (2026). When to register for VAT (opens in a new tab) ↑

  3. Office for National Statistics (Nomis) (2026). UK Business Counts - enterprises by industry and turnover size band (SIC 2007 class 43.22), via Nomis (opens in a new tab) ↑

  4. Office for National Statistics (Nomis) (2026). UK Business Counts - enterprises by industry and turnover size band (SIC 2007 class 43.22), via Nomis (opens in a new tab) ↑

  5. Department for Business and Trade (GOV.UK) (2025). Longitudinal Small Business Survey 2025: SME employers (businesses with 1 to 249 employees) (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo