Marketing leads

How to calculate your cost per lead and cost per job

Work out cost per lead, cost per booked job and return by marketing channel for a plumbing or heating firm, including staff time, with a worked Example.

Ava research teamPublished 7 min read

On this page
  1. Three numbers, not one
  2. Step one: count the full cost of each channel
  3. Step two: count genuine leads by channel
  4. Worked Example: three channels in one quarter
  5. Use margin, not invoice value, when you can
  6. Set a ceiling: the most you can pay per job
  7. Pitfalls that distort the numbers
  8. A one-page monthly routine
  9. Frequently asked questions
  10. References

Key takeaways

  • Cost per lead tells you what an enquiry costs; cost per booked job tells you whether the channel pays. Track both, by channel.
  • Include the time spent handling leads. Median hourly pay for employee plumbers was £18.82 in 2026[1], before employer costs.
  • Employer National Insurance at 15% above £5,000 a year and pension contributions of at least 3% add to the real cost of that time[2][3].
  • Compare channels on the value of jobs booked per pound spent, over a long enough window to include slow-converting quotes.

Three numbers, not one

Most trade businesses can say roughly what they spend on marketing. Far fewer can say what each channel returns. The gap is usually that spend is tracked in one place (the bank statement), enquiries in another (the phone and inbox) and jobs in a third (the diary or job software). Bringing those together for each channel gives you three numbers that answer most marketing questions.

  • Cost per lead: total cost of a channel in a period divided by the genuine enquiries it produced.
  • Cost per booked job: the same cost divided by the jobs actually booked from those enquiries.
  • Return: the value of those jobs (ideally the gross margin, not just the invoice total) divided by the cost.

Cost per lead on its own is misleading. A directory that sends cheap leads you rarely win can be worse value than a Google Ads campaign with expensive leads that turn into boiler replacements. Cost per booked job and return are what decide where money should go.

Step one: count the full cost of each channel

Include everything you pay to keep the channel running for the period, usually a month or a quarter.

  1. Direct spend: ad spend, lead fees, directory or membership fees, printing.
  2. Supplier fees: an agency or freelancer managing the channel, call tracking numbers, software.
  3. Your time and your staff's time: setting it up, answering and qualifying leads, quoting, travelling to quotes that do not convert.
  4. Discounts or offers tied to the channel, if any.

Time is the cost most often left out. Median gross hourly pay for employee plumbers and heating installers was £18.82 in 2026[1]. The National Living Wage for workers aged 21 and over is £12.71 an hour from April 2026[4], and the apprentice minimum is £8 an hour[5]. On top of pay, employers pay 15% secondary Class 1 National Insurance on earnings above £5,000 a year[2] and at least 3% into a workplace pension[3].

Hourly pay rates relevant to lead-handling time, 2026Before employer National Insurance and pension costs
Hourly pay rates relevant to lead-handling time, 2026Bar chart. Median employee plumber or heating installer: £18.82; National Living Wage (21 and over): £12.71; Apprentice minimum wage: £8.Median employee plumber or heating installerMedian employee plumber or heating installer: £18.82£18.82National Living Wage (21 and over)National Living Wage (21 and over): £12.71£12.71Apprentice minimum wageApprentice minimum wage: £8£8Hourly pay rates relevant to lead-handling time, 2026Bar chart. Median employee plumber or heating installer: £18.82; National Living Wage (21 and over): £12.71; Apprentice minimum wage: £8.Median employee plumber or heatinginstallerMedian employee plumber or heating installer: £18.82£18.82National Living Wage (21 and over)National Living Wage (21 and over): £12.71£12.71Apprentice minimum wageApprentice minimum wage: £8£8

Source: Office for National Statistics, 2026[1]

Show the data
ItemValue
Median employee plumber or heating installer£18.82
National Living Wage (21 and over)£12.71
Apprentice minimum wage£8

If an office manager spends an hour a day handling directory leads, or an engineer drives to three quotes a week that go nowhere, that time belongs in the cost of the channel that produced them.

Step two: count genuine leads by channel

A lead is an enquiry from someone in your area wanting a service you offer. Spam, sales calls, job seekers and enquiries for work you do not do are not leads, and should be excluded. To count by channel you need to know where each enquiry came from.

  1. Ask every new caller

    'How did you find us?' is still the most reliable question. Note the answer in the job record.

  2. Use tracked numbers

    Give each paid channel its own tracked number where practical, so calls are tagged automatically.

  3. Tag web forms

    Record the source of each form submission from your analytics or a hidden field on the form.

  4. Mark the outcome

    For every lead, record: booked, quoted and waiting, lost, or not suitable, and the job value when booked.

Keep this in one simple spreadsheet or in your job software if it supports sources. The value of the exercise comes from doing it consistently for at least two or three months.

Worked Example: three channels in one quarter

Example: a fictional three-engineer heating firm in Stockport tracks three channels from October to December. The figures below are invented for illustration.

Example: cost per lead and cost per job for three channels over one quarter
Channel (Example)Total costGenuine leadsCost per leadJobs bookedCost per jobJob value
Google Ads£2,400 ad spend + £300 management + £360 staff time = £3,06068£4529£106£14,200
Lead website£1,350 lead fees + £540 staff time and wasted quote visits = £1,89054£3511£172£3,900
Referral cards£150 printing + £200 thank-you gifts = £35014£2510£35£6,800

Example reading: the lead website has the lowest-looking cost per lead apart from referrals, but its leads are shared with other firms and many never reply, so cost per booked job is the highest. Google Ads costs more per lead but books more often and brings in replacements, so total job value is far higher. Referrals are tiny in volume but excellent value, which suggests the firm should put more effort into asking happy customers.

Example decision: keep Google Ads, cut the lead website to the job types that convert, and give every engineer referral cards to leave after each service. Review again after the next quarter.

Use margin, not invoice value, when you can

Return calculated on invoice totals flatters channels that bring in parts-heavy work. A boiler replacement worth several thousand pounds may carry a smaller margin than its size suggests once the boiler, flue and fittings are paid for. If you know your typical gross margin by job type (repair, service, replacement, bathroom), multiply job value by that margin before dividing by cost. Even rough margins are better than none.

Rule of thumb for decisions: a channel is worth keeping if the gross margin from jobs it books, over a sensible period, comfortably exceeds its full cost including time. If it barely breaks even, fix the conversion before adding budget.

Set a ceiling: the most you can pay per job

Once you know your margins, you can work backwards to the highest cost per booked job you are willing to pay for each type of work. That ceiling turns a vague feeling about whether a channel is 'expensive' into a clear test.

Example: a fictional firm's average boiler repair invoice is £220 and its gross margin on repairs is about half, so each repair leaves roughly £110 before overheads. The owner decides marketing should take no more than a third of that margin, which sets a ceiling of about £37 per booked repair. For boiler replacements with an average margin of £1,200, the same rule gives a ceiling of about £400 per booked replacement.

Example: with those ceilings, a channel that books repairs at £60 each is over budget unless it also brings in replacements or repeat servicing customers. A channel that books replacements at £250 each is well inside its ceiling and deserves more budget. Revisit the ceilings each year as prices, wages and margins change, and remember that a first job from a new customer can lead to years of servicing, which justifies a slightly higher ceiling for channels that bring in loyal customers.

Pitfalls that distort the numbers

  • Judging too early. Replacement quotes can take weeks to convert; a channel heavy in replacements needs a longer window.
  • Counting repeat customers as new leads from the channel they happened to click this time. Mark returning customers separately.
  • Ignoring seasonality. Compare winter with winter and summer with summer.
  • Leaving out unanswered calls. A channel can look poor because its calls arrive when nobody answers; that is a staffing issue to fix, not a reason to drop it.
  • Mixing VAT. Use the same basis (with or without VAT) for costs and job values.

For the website side of the tracking, see Google Analytics for trades, and for tagging calls by source, call tracking for plumbing marketing. Once you know your costs per job, use them to set a budget in how much a plumbing firm should spend on marketing and to judge pay-per-lead options such as Google Local Services Ads.

A one-page monthly routine

At the start of each month, spend half an hour on the following. It is enough to keep marketing decisions grounded in numbers rather than impressions.

  1. Add last month's spend and fees for each channel, plus an estimate of staff time.
  2. Count genuine leads by channel from your enquiry log.
  3. Count jobs booked and their value, including any quotes from earlier months that converted.
  4. Work out cost per lead, cost per job and return for each channel, and for the rolling last three months.
  5. Write one decision per channel: keep, change or cut. Note why, so you can check next month.

Over a year this builds a record of what works for your firm in your area, which is worth more than any industry average.

Frequently asked questions

What is a good cost per lead for a plumber?

There is no reliable UK benchmark that fits every firm, because job values, areas and win rates vary. A good cost per lead is one where the jobs you book from those leads earn comfortably more than the full cost of the channel.

How do I work out cost per job?

Divide the full cost of a channel in a period, including staff time, by the number of jobs booked from it. Use a window long enough for quotes to convert.

Should I include my own time if I am a sole trader?

Yes. Use what an hour of your time is worth on paid work. An hour spent chasing a poor lead is an hour you could have spent on a job.

How long should I track before deciding?

At least two or three months for repair-led channels, longer for channels that mainly bring in replacements or bathrooms. Compare like-for-like seasons where possible.

References

  1. Office for National Statistics (2026). Annual Survey of Hours and Earnings 2026 provisional, Table 14 (occupation by 4-digit SOC 2020) (opens in a new tab) ↑

  2. GOV.UK (2026). Rates and thresholds for employers 2026 to 2027 (opens in a new tab) ↑

  3. GOV.UK (2026). Workplace pensions: what you, your employer and the government pay (opens in a new tab) ↑

  4. GOV.UK (2026). National Minimum Wage and National Living Wage rates (opens in a new tab) ↑

  5. GOV.UK (2026). National Minimum Wage and National Living Wage rates (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo