Key takeaways
- Direct cash grants for small trade firms are rare; most funding comes as loans, customer grants, apprentice incentives or tax allowances.
- Start Up Loans lend £500 to £25,000 at a fixed 7.5% a year with up to 12 months of free mentoring[1].
- Customer-side schemes such as the Boiler Upgrade Scheme can be worth more to your order book than any business grant[2].
- Taking on an apprentice aged 16 to 24 can bring incentive payments of up to £2,000[3].
What "grant" usually means for a trade business
Search for small business grants and you will find long lists. Most of them do not apply to a plumbing or heating firm, and many are closed. The honest picture is that free cash handed to a sole trader to buy a van or tools is uncommon. What does exist falls into five groups, and knowing which group you are looking at saves hours.
| Type | Who provides it | What it helps with | The catch |
|---|---|---|---|
| Government-backed loans | Start Up Loans and lenders backed by the British Business Bank | Starting or growing: van, tools, stock, marketing | It is a loan; it must be repaid with interest |
| Customer grants | Boiler Upgrade Scheme, Warm Homes programmes, local councils | Your customers' heat pumps and efficiency work | Paid against the job; you often need MCS or other certification |
| Apprentice and hiring incentives | Department for Education and the devolved governments | Training costs and extra payments for young apprentices | Conditions on age, start dates and staying on programme |
| Tax allowances | HMRC | Lower National Insurance, capital allowances on equipment | Reduces tax rather than paying cash |
| Local support | Growth hubs, councils, chambers of commerce | Advice, workshops, occasional small grants | Funding pots open and close; eligibility is local |
Start Up Loans: the most common route for new firms
For a new or young business, a Start Up Loan is often the most realistic form of government support. Loans run from £500 to £25,000 at a fixed interest rate of 7.5% a year, repaid over one to five years[1]. You must be 18 or over and the business must have been fully trading for less than five years[1].
The part people overlook is the mentoring. Successful applicants get up to 12 months of free mentoring[1]. For a tradesperson who knows the work but not the bookkeeping, a mentor who has run a business can be worth as much as the money.
- You will need a business plan and a cash flow forecast. See our guide to writing a plumbing business plan.
- It is a personal loan for business use, so you are personally liable for repayment.
- Borrow for things that earn money, such as a van or a tool you will use weekly, not for running costs you cannot cover.
Customer grants that fill your order book
For heating firms, the most valuable funding is often the money your customers can claim. Under the Boiler Upgrade Scheme in England and Wales, customers can get £7,500 towards an air source or ground source heat pump[2]. Homes heated by oil or LPG with no mains gas connection can get an extra £1,500 towards an air or ground source heat pump until March 2027[2].
Source: GOV.UK, 2026[2]
Show the data
| Item | Value |
|---|---|
| Air source heat pump | £7,500 |
| Ground source heat pump | £7,500 |
| Biomass boiler | £5,000 |
| Air-to-air heat pump | £2,500 |
The grant is applied for by the installer and taken off the customer's bill, so the business that is certified and organised wins the work. The Warm Homes Plan commits £15 billion of public investment to upgrade up to 5 million homes by 2030[4], which means more schemes will run through installers over the next few years.
Before promoting any grant, check the scheme page on the day. Eligibility, amounts and deadlines change, and telling a customer they qualify when they do not damages trust quickly.
Funding for apprentices and training
If you plan to take on an apprentice, the funding is real and worth understanding. When you recruit a new apprentice aged 16 to 24, you can receive up to £2,000, paid in two instalments of £1,000: the first 90 days after the apprenticeship starts and the second a year after[3]. The government pays the training provider, which passes the payment to you, and the apprentice must still be employed by you when each payment falls due[3].
Training for new technologies also attracts support from time to time. Just under 10,000 people completed a recognised heat pump training qualification in 2024, 15% more than in 2023[5]. Some of that training was funded through government or manufacturer schemes, so ask the training centre what support is open before you pay the full fee.
Tax reliefs that act like funding
Once you employ people, Employment Allowance can reduce your annual National Insurance bill. For 2026 to 2027 it is £10,500 for eligible employers[6]. For a small firm with one or two employees, that can wipe out most or all of the employer National Insurance bill, which changes the maths on your first hire.
Ask your accountant about capital allowances on vans, tools and equipment. They do not put cash in your account, but they can reduce the tax you pay in the year you buy.
Reliefs are easy to miss because nobody sends you a letter about them. Put a short item on your year-end checklist: confirm Employment Allowance has been claimed through payroll, list every equipment purchase for capital allowances, and ask whether any training or apprentice costs qualify for support. Ten minutes with your bookkeeper each spring can be worth more than a week of searching for grants that do not apply to trades.
A funding search routine that does not waste days
Write down what the money is for
A van, a heat pump training course, an apprentice, a unit. Funders fund purposes, not businesses in general.
Check national schemes first
Start Up Loans, apprenticeship funding and the current customer grant schemes. These are stable and well documented.
Contact your local growth hub
Most areas in England have one. Ask what is open for trade businesses this quarter and whether they run free workshops on finance or marketing.
Ask your council and trade body
Councils sometimes fund local energy efficiency work through installers. Trade associations often know about training support.
Check the terms before applying
Match funding, claw-back if you stop trading, restrictions on what you can buy, and how long payment takes.
Diary the deadlines
Many local pots open for a few weeks. Set a reminder to check again each quarter.
Avoiding funding traps
- Paid grant-finding services that charge up front for lists you could search yourself.
- Schemes that require you to spend first and claim later when your cash flow cannot cover the gap.
- Loans dressed up as grants. If you have to repay it, it is a loan.
- Customer grant promises in your marketing that do not match the current scheme rules.
Example: a fictional sole trader wants to add heat pumps to a gas-focused business. Instead of searching for a business grant, she books a heat pump course, applies for MCS certification and lists the Boiler Upgrade Scheme on her website. The funding that pays for the growth is the customer grant on each job, not a grant to her business.
How funders judge a trade business application
Whether you are applying for a loan, a local grant or a funded training place, the person reading your application is asking the same few questions. Answer them directly and you will stand out from the many applications that describe the business in general terms and never say what the money changes.
- What exactly will the money buy, and what does it cost? Attach a quote for the van, course or equipment.
- How does that purchase earn money? For a van, show the extra jobs it allows. For training, show the new service it opens up and the demand you already see for it.
- Can the business repay or sustain it? Show a simple monthly cash flow with the new cost included, and a cautious version with fewer jobs.
- Is the owner credible? Qualifications, registrations such as Gas Safe, years in the trade and any existing customer base.
- Is anything already in place? Insurance, a business bank account, bookkeeping software and a website or listing all show you are organised.
Keep copies of everything you send. Funders often come back with questions weeks later, and local schemes sometimes reopen with similar forms. A folder with your plan, forecasts, certificates and quotes turns the next application into an afternoon rather than a week.
Finally, be wary of borrowing to fix a problem that is really about pricing or cash collection. If jobs are full but the bank balance is always low, look at deposits, invoice timing and your labour rate before you take on debt. Funding should speed up a business that already works, not hide one that does not.
Frequently asked questions
Are there grants to start a plumbing business?
Direct start-up grants are rare. The most common support is a Start Up Loan of £500 to £25,000 with free mentoring[1], plus local growth hub advice.
Can I get funding to train in heat pumps?
Sometimes. Funded places open through government and manufacturer schemes from time to time, so ask training centres what is currently available before paying full price.
Do I need certification to offer Boiler Upgrade Scheme grants?
Yes. The installer applies for the grant, and installers need to meet the scheme's certification requirements, usually MCS. Check the scheme guidance before quoting.
Is Employment Allowance a grant?
No, it reduces your employer National Insurance bill. For 2026 to 2027 it is £10,500 for eligible employers[6].
References
GOV.UK (2026). Start Up Loans (opens in a new tab) ↑
GOV.UK (2026). Apply for the Boiler Upgrade Scheme: what you can get (opens in a new tab) ↑
GOV.UK (2026). Employing an apprentice: get extra payments (opens in a new tab) ↑
Department for Energy Security and Net Zero (GOV.UK) (2026). Warm Homes Plan (opens in a new tab) ↑
Heating and Hotwater Industry Council (HHIC) (2024). Bumper year for UK heat pumps (opens in a new tab) ↑
GOV.UK (2026). Rates and thresholds for employers 2026 to 2027 (opens in a new tab) ↑