Tax finance admin

Controlling fuel and van running costs

Ways a plumbing firm can cut fuel and van running costs: cost per mile, routing, merchant runs, fuel cards, maintenance and pricing travel into jobs.

Ava research teamPublished 7 min read

On this page
  1. Why van costs creep up unnoticed
  2. Step one: know your cost per mile
  3. Step two: cut the miles you do not charge for
  4. Step three: fuel cards and buying fuel
  5. Step four: driving, weight and maintenance
  6. Step five: price travel into the work
  7. A simple van policy for engineers
  8. The tax side of van running costs
  9. Example: a monthly van cost review
  10. Quick wins to start this week
  11. Frequently asked questions
  12. References

Key takeaways

  • Fuel costs swing: HMRC's benchmark rate for a large diesel engine rose from 18p a mile in spring 2026 to 23p over the summer[1].
  • Measure cost per mile for each van every month; you cannot control what you do not count.
  • Unplanned merchant runs and second visits are usually a bigger cost than driving style, so fix stock and first-time fix rates first.
  • The tax-deductible mileage rate for vans is 55p for the first 10,000 business miles from 6 April 2026, and the rate above 10,000 miles rises to 35p from April 2027[2][3].
  • Price travel honestly into call-outs and far-away jobs rather than absorbing it.

Why van costs creep up unnoticed

Fuel is paid in small amounts, often on a personal card, and rarely checked against the work it supported. Prices also move faster than most firms review their call-out charges. HMRC's advisory fuel rate for a diesel engine over 2000cc, which is calculated from official pump prices, went from 18p a mile for March to May 2026 to 23p for June to August, before settling at 22p from September[1].

HMRC advisory fuel rate, diesel engine over 2000ccPence per mile, set quarterly for company cars from official fuel prices
HMRC advisory fuel rate, diesel engine over 2000ccLine chart. Dec 2025 to Feb 2026: 18 pence; Mar to May 2026: 18 pence; Jun to Aug 2026: 23 pence; From Sep 2026: 22 pence.16 pence18 pence20 pence22 pence24 penceDec 2025 to Feb 2026From Sep 2026Dec 2025 to Feb 2026: 18 penceMar to May 2026: 18 penceJun to Aug 2026: 23 penceFrom Sep 2026: 22 pence22 pence18 penceHMRC advisory fuel rate, diesel engine over 2000ccLine chart. Dec 2025 to Feb 2026: 18 pence; Mar to May 2026: 18 pence; Jun to Aug 2026: 23 pence; From Sep 2026: 22 pence.16 pence18 pence20 pence22 pence24 penceDec 2025 to Feb 2026From Sep 2026Dec 2025 to Feb 2026: 18 penceMar to May 2026: 18 penceJun to Aug 2026: 23 penceFrom Sep 2026: 22 pence22 pence18 pence

Source: HM Revenue & Customs (GOV.UK), 2026[1]

Show the data
PeriodValue
Dec 2025 to Feb 202618 pence
Mar to May 202618 pence
Jun to Aug 202623 pence
From Sep 202622 pence

Businesses feel it. In late October 2026, 69% of UK businesses expressed some concern about energy prices[4]. As a worked example, each extra penny a mile on a van doing 15,000 miles is £150 a year, multiplied across the fleet, and the UK van parc keeps growing, with 81,644 new vans registered in April to June 2026 alone[5]. The steps below are in the order that usually saves most money for least effort.

Step one: know your cost per mile

  1. Put fuel on one payment method per van

    A fuel card or a dedicated business debit card per van makes every fill-up traceable. Stop engineers paying personally and claiming back.

  2. Record the odometer monthly

    On the first working day of each month, photograph the dashboard of each van. It takes seconds and gives you the miles.

  3. Add the other running costs

    Insurance, servicing, tyres, repairs, vehicle tax, breakdown cover and finance. Divide the year's total by twelve.

  4. Work out pence per mile

    Divide the month's total running costs by the miles driven. Track fuel-only and all-in figures separately.

  5. Compare vans and months

    A van whose fuel cost per mile is clearly higher than the others in similar work deserves a look: tyres, a fault, idling, or private use.

Keep the figures with your monthly bookkeeping so they feed straight into your accounts. Our guide to simple bookkeeping for plumbers sets out a weekly routine that includes vehicle costs.

Step two: cut the miles you do not charge for

The cheapest mile is the one you never drive. In plumbing the hidden miles usually come from three places: going back to the merchant mid-job, returning to finish a job because a part was missing, and criss-crossing the patch because the diary was booked in the order calls arrived.

  • Keep a standard van stock list for common repairs and service jobs, and restock from a weekly order rather than daily trips.
  • Ask better questions when the job is booked: boiler make and model, photos of the fault, access and parking. That raises the chance of fixing it first time.
  • Zone the diary. Group routine work by area and day, and keep emergency slots in each zone rather than sending the nearest free engineer across town.
  • Order for delivery to site on bigger jobs instead of collecting in the van.
  • Use click-and-collect at the branch on your route, not the one nearest the office.

Example (fictional): a four-van firm in Nottingham finds each engineer averages two unplanned merchant runs a day of about 6 miles each. Cutting that to one run a day saves roughly 6 miles per van per day, or about 1,400 miles per van over a working year, before counting the hour of labour it releases.

Step three: fuel cards and buying fuel

Common ways for trade firms to pay for fuel and what to check before choosing.
OptionGood forWatch out for
Branded fuel cardFirms whose routes pass one network's sitesLimited sites; fees per card or per transaction
Multi-network fuel cardMixed patches and rural areasPrices can be above the cheapest local pump
Fixed-price or weekly-price cardBudgeting and fleets with steady mileageLock-in when pump prices fall
Business debit card per vanOne or two vansLess control over what is bought

Whatever you choose, set controls: fuel only, a cap per transaction, and a report showing the van, date, litres and site. A monthly report that nobody reads saves nothing, so put a ten-minute review in the diary.

Step four: driving, weight and maintenance

  • Clear the van. Old boilers, scrap copper and unused stock add weight every mile. Set a weekly scrap run instead of carrying it.
  • Check tyre pressures with each fuel fill. Under-inflated tyres waste fuel and wear faster.
  • Remove roof racks and ladders when they are not needed for the week; they add drag on every journey.
  • Do not leave engines running while you fetch parts or write up jobs.
  • Service on schedule. Short stop-start trips are hard on diesel particulate filters, so ask your garage what your van needs for town work.
  • Use telematics if you have more than a few vans, but tell staff what is recorded and why, and use it for coaching rather than blame.

Step five: price travel into the work

Travel is a cost of doing the job, and customers understand that. Build it into your call-out or first-hour charge for your core area, and set clear zone charges beyond it. For jobs well outside your patch, quote the travel explicitly, or decline them if the diary is full nearer home.

Review your call-out pricing when fuel moves sharply rather than once a year. A simple rule, such as revisiting the travel element whenever your fuel cost per mile changes by a tenth, keeps margins steady without constant repricing.

A simple van policy for engineers

Most running-cost problems are habits rather than fraud. A one-page van policy that every engineer signs sets expectations without making anyone feel watched. Keep it short and practical, and review it each year.

  • Fuel card use: fuel only, for the assigned van, with the mileage entered at every fill-up.
  • Private use: whether it is allowed, and if so how it is recorded.
  • Daily checks: tyres, lights, fluids and any warning lights reported the same day.
  • Load: scrap and old appliances off the van at the end of each week.
  • Parking and fines: who pays, and how fines are reported. Fines are not an allowable business expense.
  • Breakdowns: who to call and how to tell the office so the diary can be rearranged.

The tax side of van running costs

Sole traders can claim actual van costs or a flat rate per business mile. For 2026 to 2027 the flat rate for cars and goods vehicles is 55p a mile for the first 10,000 business miles and 25p after that[3]. Budget 2026 raises the rate above 10,000 miles to 35p from 6 April 2027 and extends the 5p fuel duty cut and freeze to 1 July 2027[2].

Whichever method you use, keep a mileage log that separates business from private use. It supports your claim, and it is the same data you need to manage costs. If you are weighing up an electric van as a way to cut fuel bills, see electric vans for plumbers.

Example: a monthly van cost review

Example (fictional): Sam runs three vans. In October, van A does 1,320 miles with £310 of fuel, van B 1,180 miles with £360, and van C 1,250 miles with £300. Fuel per mile is about 23p, 31p and 24p.

Example: van B is clearly out of line. Sam checks the fuel card report and finds two fill-ups on Sundays, when the firm does not work, and a slow puncture the engineer had been topping up. He fixes the tyre, reminds the team of the fuel card policy, and van B's November figure falls into line with the others. He also notices all three vans visited the same merchant branch twice a day, which leads to a new stock list and a weekly delivery.

Quick wins to start this week

  1. Photograph every odometer on Monday and start a cost-per-mile sheet.
  2. Move every van onto its own fuel card or business card.
  3. Empty the vans of scrap and stock that has not moved in a month.
  4. Agree a stock list for the five most common repair jobs and order it weekly.
  5. Re-zone next week's routine bookings by area before confirming them.
  6. Check your call-out charge still covers travel at today's fuel cost.

Frequently asked questions

What is a reasonable fuel cost per mile for a plumbing van?

It depends on the van, load and route. HMRC's advisory rate for a large diesel car engine was 22p a mile from September 2026, which is a useful lower benchmark. Track your own vans and compare them with each other.

Are fuel cards worth it for a small trade business?

Usually yes once you have more than one van, mainly for control and records rather than price. Check the fees, the site network on your routes and the reporting.

Can I claim fuel as a business expense?

Yes, the business share of fuel is allowable if you claim actual costs. If you use the flat mileage rate instead, fuel is included in that rate and cannot be claimed separately.

How do I stop fuel card misuse?

Restrict cards to fuel, set transaction limits, link each card to one van, review the monthly report and compare litres bought with miles driven.

References

  1. HM Revenue & Customs (GOV.UK) (2026). Advisory fuel rates (opens in a new tab) ↑

  2. HM Treasury (GOV.UK) (2026). Budget 2026 (opens in a new tab) ↑

  3. GOV.UK (2026). Simplified expenses if you're self-employed (full guide) (opens in a new tab) ↑

  4. Office for National Statistics (2026). Business insights and impact on the UK economy: latest bulletin (opens in a new tab) ↑

  5. Department for Transport (GOV.UK) (2026). Vehicle licensing statistics: April to June 2026 (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo