Staffing training

Keeping good engineers: retention that works

Why plumbing and heating engineers leave and what keeps them: fair pay bands, predictable hours, a fair on-call rota, good vans, training and recognition.

Ava research teamPublished 6 min read

On this page
  1. Why keeping engineers beats finding new ones
  2. Pay: know the market and be open about it
  3. Hours and the on-call rota
  4. Vans, kit and the working day
  5. Training and a route forward
  6. Bonuses that help rather than hurt
  7. Recognition that does not feel fake
  8. Stay interviews: ask before they leave
  9. Retention mistakes small firms make
  10. Example: a retention plan for a seven-engineer firm
  11. Frequently asked questions
  12. References

Key takeaways

  • Recruiting is hard for 45% of construction SME employers[1], so every engineer you keep is one you do not have to find.
  • Median full-time pay for employee plumbers was £39,179 in 2026, a little below the £40,911 median for all full-time employees[2].
  • Engineers work long weeks, with median paid hours of 40 against 36.9 for all employees[3]; predictable finishes are worth as much as a pay rise to many.
  • Fairness is the quiet driver: who gets the good jobs, the on-call weeks and the overtime.
  • Ask people why they stay, not only why they leave, and act on one thing each quarter.

Why keeping engineers beats finding new ones

Every heating firm owner knows the cost of losing a good engineer: the months of advertising, the agency fees, the customers who liked the old engineer, the new starter who needs supervision. Recruitment and skills were an obstacle to success for 45% of construction SME employers in 2025[1]. The alternative career is always close at hand, too. About 71,200 plumbers and heating installers, nearly half the occupation, are self-employed[4], and every employed engineer knows they could join them.

Retention is not about perks. Engineers mostly leave for a handful of reasons: pay that has fallen behind, hours that never end, an on-call rota that feels unfair, a poor van or kit, no route forward, and a manager who only notices mistakes. Each of those can be fixed in a small firm, often quickly.

Pay: know the market and be open about it

Start with the facts. The median gross annual pay of full-time employee plumbers and heating and ventilating installers was £39,179 in 2026, provisional ONS figures show, against £40,911 for all full-time UK employees[2]. Median weekly pay for full-time engineers was £782.50, up 4.3% on 2025[5], and the median hourly rate was £19.00, up 3.7%[6]. If your rates have not moved in two years, your engineers have noticed, because recruiters tell them.

Median gross annual pay, full-time employees, 2026 (provisional)
Median gross annual pay, full-time employees, 2026 (provisional)Comparison. Plumbers and heating installers: £39,179; All full-time UK employees: £40,911.£39,179Plumbers and heating installersPlumbers and heating installers: £39,179£40,911All full-time UK employeesAll full-time UK employees: £40,911Median gross annual pay, full-time employees, 2026 (provisional)Comparison. Plumbers and heating installers: £39,179; All full-time UK employees: £40,911.£39,179Plumbers and heating installersPlumbers and heating installers: £39,179£40,911All full-time UK employeesAll full-time UK employees: £40,911

Source: Office for National Statistics, 2026[2]

Show the data
ItemValue
Plumbers and heating installers£39,179
All full-time UK employees£40,911

Pay rises cost money, and wage costs are already a strain: 38% of SME employers named the National Living Wage as a major obstacle in 2025[7]. Openness can do as much as the size of the rise. A simple set of pay bands, with written criteria for moving up, removes the suspicion that pay depends on who shouts loudest.

Example pay band structure for a small heating firm
LevelWhat the engineer can doHow to move up
ImproverPlumbing and heating work under supervision; working towards gas assessmentsPass ACS assessments and six months without major callbacks
EngineerServices, breakdowns and installs in signed-off categoriesAdd categories, such as unvented or heat pumps; strong customer feedback
Senior engineerAll domestic work, complex fault-finding, buddying new startersLead installs, mentor, low callback rate over a year
Lead or supervisorPlans install work, checks quality, covers the diaryManagement training and agreed business need

Hours and the on-call rota

Employee plumbers had median total paid hours of 40 a week in 2026, more than the 36.9 for all employees[3], and that is before the unpaid time spent finishing paperwork at the kitchen table. Long days in winter are part of the job. Never knowing when the day will end is what drives people away.

  • Plan the last job of the day to end by a set time, with travel time built in.
  • Publish the on-call rota months ahead, and let engineers swap with the office's agreement.
  • Pay standby fairly and give a later start after a late call-out.
  • Do paperwork on the job with a good app, not in the evening.
  • Share out unpopular work, such as drain jobs or difficult customers, in turn.

Fairness matters as much as the hours themselves. If the owner's favourite always gets the installs and the newest engineer always gets the Friday 4pm breakdown, resentment builds. Rules that are written down and visible to everyone take the heat out of most rota arguments.

Vans, kit and the working day

An engineer spends more time in the van than anywhere else. A reliable, clean, well-racked van with the right stock says the firm takes their work seriously. A tired van that breaks down, with stock that is never replenished, says the opposite. Ask engineers what slows them down: missing parts, the wrong analyser, a phone that will not run the job app. Fixing those costs less than replacing an engineer and pays back in productivity.

Small touches count too: a proper place to park at the unit, a stock run that happens on the same day each week, and an office that answers the engineer's call quickly when a customer has a question. Engineers judge the firm by how easy it makes their day.

Training and a route forward

Training is retention as much as development. Just under 10,000 people completed a recognised heat pump training qualification in 2024, 15% more than in 2023[8]. Engineers who see the market shifting want to keep up, and if you will not fund the course, a competitor will. Pay for ACS renewals, add a new skill each year for engineers who want it, and connect each new skill to a pay band. Put a training clause in the contract if you want repayment protection, but make it fair and tapered.

Bonuses that help rather than hurt

Bonus schemes can keep good engineers or drive them out. Schemes that reward selling, such as commission on every filter or power flush, can push engineers into recommending work customers do not need, and the honest ones dislike it. Schemes that reward quality, such as a quarterly payment for low callbacks, complete paperwork and good customer feedback, tend to work better in heating firms because they reward what the business really needs.

  • Keep the rules short enough to explain in two minutes.
  • Pay quarterly rather than yearly, so the link to effort is clear.
  • Make the measures ones the engineer can influence.
  • Never cut basic pay to fund a bonus.
  • Review the scheme each year and drop measures that cause bad behaviour.

For more detail, see our guide to engineer bonus schemes.

Recognition that does not feel fake

  • Share customer reviews that name an engineer with the whole team.
  • Thank people specifically: 'you stayed late to get the Smiths' heating back on, and they rang to say so'.
  • Ask senior engineers for their view on new kit, suppliers and processes.
  • Celebrate qualifications passed and length of service.
  • Fix complaints engineers raise, and tell them it is fixed.

Stay interviews: ask before they leave

Exit interviews tell you why someone left when it is too late. Stay interviews ask the same questions while you can still act. Hold them once a year with every engineer, separate from performance reviews.

  1. What do you most enjoy about working here?
  2. What makes a bad day for you?
  3. If you were offered another job tomorrow, what would make you take it?
  4. What one thing would make your job easier?
  5. Do you see yourself here in two years, and doing what?

Write down the answers, pick the issue that comes up most often, and fix it within the quarter. Tell the team what you changed and why.

Retention mistakes small firms make

  1. Counter-offering only when someone resigns, which teaches the team that resigning is how to get a rise.
  2. Treating every engineer the same in reviews, so strong performers see no difference for their effort.
  3. Promising training or a van upgrade and then letting it slip for months.
  4. Letting one difficult engineer set the tone for the rest without addressing it.
  5. Assuming money is the only reason, and missing the rota, the van or the manager.

Each of these is common because it is easy in the moment. A short written plan for each engineer, reviewed twice a year, stops most of them.

Example: a retention plan for a seven-engineer firm

Example (fictional): a firm in Manchester loses two engineers in a year, both to firms offering similar pay. Stay interviews with the rest reveal the real complaints: on-call weeks are given out unevenly, vans are shared with no fixed stock, and nobody knows how to earn more. The owner publishes a six-month on-call rota with swaps allowed, gives each engineer their own van with a stock list, and introduces three pay bands with written criteria. Nobody leaves in the following year, and two engineers start heat pump training to move up a band.

Measure the result. Example: staff turnover is leavers in the year divided by average headcount. One leaver from an average team of seven is a turnover of 14%. Track it yearly, alongside the reasons people give for leaving.

Frequently asked questions

Why do plumbing engineers leave their employers?

Common reasons are pay falling behind, long and unpredictable hours, an unfair on-call rota, poor vans or kit, no route to progress and a lack of recognition. Many also leave to become self-employed.

What is a stay interview?

A short yearly conversation asking employees what keeps them, what frustrates them and what might make them leave, so you can act before they do.

Do pay bands work in small firms?

Yes. Even three or four bands with clear criteria make pay feel fair and give engineers a reason to train and stay.

References

  1. Department for Business and Trade (GOV.UK) (2025). Longitudinal Small Business Survey 2025: SME employers (businesses with 1 to 249 employees) (opens in a new tab) ↑

  2. Office for National Statistics (2026). Annual Survey of Hours and Earnings 2026 provisional, Table 14 (occupation by 4-digit SOC 2020) (opens in a new tab) ↑

  3. Office for National Statistics (2026). Annual Survey of Hours and Earnings 2026 provisional, Table 14 (occupation by 4-digit SOC 2020) (opens in a new tab) ↑

  4. Office for National Statistics (Nomis) (2026). Annual Population Survey - regional - occupation (SOC2020) by sex by employment type, via Nomis (opens in a new tab) ↑

  5. Office for National Statistics (2026). Annual Survey of Hours and Earnings 2026 provisional, Table 14 (occupation by 4-digit SOC 2020) (opens in a new tab) ↑

  6. Office for National Statistics (2026). Annual Survey of Hours and Earnings 2026 provisional, Table 14 (occupation by 4-digit SOC 2020) (opens in a new tab) ↑

  7. Department for Business and Trade (GOV.UK) (2025). Longitudinal Small Business Survey 2025: SME employers (businesses with 1 to 249 employees) (opens in a new tab) ↑

  8. Heating and Hotwater Industry Council (HHIC) (2024). Bumper year for UK heat pumps (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo