Metrics growth

Buying an existing plumbing business

Due diligence for buying a plumbing and heating business: customers, contracts, staff and TUPE, registrations, finances and a handover plan.

Ava research teamPublished 7 min read

On this page
  1. Why buy rather than build
  2. Share purchase or asset purchase
  3. Due diligence: customers
  4. Due diligence: contracts and compliance
  5. Due diligence: people and TUPE
  6. Due diligence: finances and assets
  7. From first conversation to completion
  8. Example: a small acquisition
  9. Common mistakes
  10. Frequently asked questions
  11. References

Key takeaways

  • You are buying customers, contracts, people and reputation. Check each one rather than relying on the turnover figure.
  • When a business changes owner, employees' jobs usually transfer with their terms and continuity of employment under TUPE[1].
  • The seller must give you information about transferring employees at least four weeks before the transfer[2]. Ask for it earlier.
  • Registrations do not come with the van: gas work requires the business and its engineers to be properly registered[3].
  • Plan a handover with the seller, because in most small firms the owner is the business's main relationship with its customers.

Why buy rather than build

Buying an established plumbing and heating firm can give you, in one step, what takes years to build: a customer list, service plans, landlord and agent accounts, trained engineers, vans, a phone number customers know and a local name. For an owner who wants to grow faster, or an engineer who wants a business with income from day one, that can be worth paying for.

The risk is that much of the value is attached to the seller personally. Customers call because they know the owner; agents send work because of a relationship; engineers stay because they like the boss. Due diligence is about finding out how much of the business will still be there after the seller leaves.

There are plenty of potential targets. Of 47,910 registered plumbing and heating enterprises in 2026, the largest group, 19,630, turned over £100,000 to £249,000 a year[4]. Most were companies: about 77%, or 37,070[5]. Whether the seller is a company or a sole trader shapes how the deal is structured.

Share purchase or asset purchase

Share and asset purchases compared for a small plumbing and heating firm
FeatureShare purchaseAsset purchase
What you buyThe company itself, with everything inside itChosen assets: customer list, goodwill, vans, stock, contracts, name
Seller typesLimited companies onlyCompanies and sole traders
Past liabilitiesStay with the company, so you inherit themMostly stay with the seller, unless you agree otherwise
EmployeesEmployer stays the same companyUsually transfer to you under TUPE
ContractsStay in place, subject to change-of-control clausesNeed assigning or re-signing with each customer
RegistrationsCompany registrations continue, subject to scheme rulesYou need your own in place before trading

Which route suits depends on tax, liabilities and what the seller will accept. Take advice from an accountant and a solicitor who handle small business sales before agreeing heads of terms.

Due diligence: customers

  • The customer list: how many active customers, how recently each booked, and what share of turnover the top ten provide.
  • Recurring income: service plans, landlord properties on annual checks and any maintenance contracts, with renewal dates. Landlords must have gas appliances checked at least every 12 months[6], so a well-kept renewal list is a real asset.
  • Consent and data: whether the list includes marketing consent, how the data were collected and whether it can lawfully be transferred and used by you.
  • Concentration: a single agent or housing contractor supplying a third of the work is a risk if that relationship is personal to the seller.
  • Reputation: reviews, complaints, unresolved disputes and any callbacks or warranty work still owed.

Ask to see the job records behind the turnover. A firm whose income comes from hundreds of returning customers is worth more than one with the same turnover from a few large jobs last year.

Due diligence: contracts and compliance

Read every material contract: agent and landlord agreements, housing association or contractor frameworks, supplier accounts, vehicle leases, premises, software and the phone contract. Note any clause that ends or changes the contract on a change of ownership, any response-time obligations and any penalties.

Then check compliance. By law, no employer or self-employed person may carry out work on a gas fitting unless they are in a class of persons approved by the HSE, which in practice means the Gas Safe Register[3]. Confirm the business registration, each engineer's current categories and any competent person scheme memberships, and plan how they will continue or be replaced from completion day. Ask for records of certificates issued, notifications made and any unsafe situations reported.

If the firm does subcontract work, check its Construction Industry Scheme status, because contractors deduct 20% from registered subcontractors and 30% from those not registered[7]. A firm with deduction problems has cash-flow problems you will inherit.

Due diligence: people and TUPE

When a business changes owner, its employees may be protected by the Transfer of Undertakings (Protection of Employment) regulations. Where TUPE applies, the employees' jobs usually transfer to the new owner, their terms and conditions transfer, and continuity of employment is maintained[1]. You cannot simply offer new terms to the people you want and leave the rest.

The seller must provide information about the employees at least four weeks before the transfer, normally including their age, main employment details, disciplinary action and grievances in the last two years, and any legal action or potential claims[2]. Ask for it at the start of due diligence rather than waiting for the legal minimum.

Median gross annual pay of full-time employees, 2026Annual Survey of Hours and Earnings, provisional
Median gross annual pay of full-time employees, 2026Comparison. Plumbers and heating installers: £39,179; All full-time employees: £40,911.£39,179Plumbers and heating installersPlumbers and heating installers: £39,179£40,911All full-time employeesAll full-time employees: £40,911Median gross annual pay of full-time employees, 2026Comparison. Plumbers and heating installers: £39,179; All full-time employees: £40,911.£39,179Plumbers and heating installersPlumbers and heating installers: £39,179£40,911All full-time employeesAll full-time employees: £40,911

Source: Office for National Statistics, 2026[8]

Show the data
ItemValue
Plumbers and heating installers£39,179
All full-time employees£40,911

Compare pay with the market. Median full-time pay for employee plumbers and heating installers was £39,179 in 2026, against £40,911 for all full-time employees[8]. Engineers paid well below the going rate are a retention risk once the owner who hired them has gone; engineers paid well above it change your margin forecasts.

Due diligence: finances and assets

The accounts tell you what happened; the job records tell you whether it will happen again. Read both, and ask your accountant to rebuild profit on the basis of how you would run the business.

  • Maintainable profit: adjust reported profit for the owner's real pay, family members on the payroll, one-off jobs and costs you will add, such as office help to replace the owner's evening admin.
  • Debtors: who owes what and how old it is. Agree who keeps the existing debts and who collects them.
  • Stock and vans: count van stock, check vehicle condition, mileage and finance, and confirm which leases can transfer.
  • Tools and test equipment: confirm what is included and whether calibration is current.
  • Tax position: VAT, PAYE, Corporation Tax and Construction Industry Scheme records, with no arrears.

In a share purchase, ask for warranties and indemnities from the seller covering tax, employment and past work. In an asset purchase, be clear in writing which liabilities, such as callbacks on past installations, you are and are not taking on.

From first conversation to completion

  1. Initial discussion and confidentiality

    Agree a non-disclosure agreement before receiving customer, staff or financial information.

  2. Headline review

    Three years of accounts, turnover by work type, debtors, recurring income and staff list. Decide whether it is worth going further.

  3. Heads of terms

    Price, structure, what is included, payment timing, any earn-out and the seller's handover role. Usually not legally binding, but it sets the deal.

  4. Full due diligence

    Customers, contracts, compliance, people, finance and assets, with your accountant and solicitor.

  5. Finance and registrations

    Confirm funding, insurance and the registrations you need from day one.

  6. Contracts and completion

    Sale agreement with warranties from the seller, TUPE process completed, and payment.

  7. Handover

    A defined period, often several months, in which the seller introduces you to key customers and agents and helps keep staff.

Example: a small acquisition

Example: a fictional three-van firm in Peterborough is offered a retiring owner's business with turnover of £230,000, one employed engineer, 260 service plan customers and 140 landlord properties. On review, 35% of turnover comes from one letting agent whose director is the seller's friend, and the employed engineer is paid about 10% below the local going rate.

Example terms: the buyer agrees an asset purchase so most past liabilities stay with the seller, pays part of the price on completion and the rest over 18 months linked to retained plan customers and agent turnover, and asks the seller to stay for three months introducing customers. The engineer transfers under TUPE, and the buyer budgets a pay rise in the first year to keep him.

Common mistakes

  • Paying for turnover rather than for maintainable profit and recurring income.
  • Ignoring the phone number. Make sure the number customers call transfers to you with the business.
  • Assuming customer data can be used for marketing without checking how it was collected.
  • Underestimating how much the seller did personally, from quoting to chasing debts.
  • No plan for the first 90 days, when customers and staff decide whether to stay.

A business with written processes is far easier to buy and run; see writing down processes. Compare the cost of acquisition with the alternatives in franchise vs independent, and if you are on the other side of the table, read selling a plumbing business. For your own role after the deal, getting off the tools covers what changes.

Frequently asked questions

Do employees transfer when I buy a plumbing business?

Often, yes. Where TUPE applies, employees' jobs usually transfer to the new owner with their existing terms and continuity of employment. In a share purchase the employer company itself stays the same.

Can I use the seller's Gas Safe registration?

Gas work must be done by a business and engineers in the approved class. Plan how registrations continue or are replaced from completion day, and check each engineer's current categories.

What should I check about the customer list?

Active customers, recurring income, concentration in a few accounts, reviews and complaints, and whether the data can lawfully be transferred and used for marketing.

Should the seller stay on after the sale?

In most small firms, yes, for a defined handover period. The seller's introductions to key customers, agents and staff protect much of what you paid for.

References

  1. GOV.UK (2026). Business transfers, takeovers and TUPE (opens in a new tab) ↑

  2. GOV.UK (2026). Business transfers, takeovers and TUPE: information about employees during transfers (opens in a new tab) ↑

  3. legislation.gov.uk (The National Archives) (1998). The Gas Safety (Installation and Use) Regulations 1998, regulation 3 (opens in a new tab) ↑

  4. Office for National Statistics (Nomis) (2026). UK Business Counts - enterprises by industry and turnover size band (SIC 2007 class 43.22), via Nomis (opens in a new tab) ↑

  5. Office for National Statistics (Nomis) (2026). UK Business Counts - enterprises by industry and employment size band (SIC 2007 class 43.22), via Nomis (opens in a new tab) ↑

  6. legislation.gov.uk (The National Archives) (1998). The Gas Safety (Installation and Use) Regulations 1998, regulation 36 (opens in a new tab) ↑

  7. GOV.UK (2026). What you must do as a CIS subcontractor: get paid (opens in a new tab) ↑

  8. Office for National Statistics (2026). Annual Survey of Hours and Earnings 2026 provisional, Table 14 (occupation by 4-digit SOC 2020) (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo