Key takeaways
- There is no single national list: the manufacturer's instructions for the model set what a service includes.
- After any work on a gas appliance the law requires checks of the flue, combustion air, operating pressure or heat input, and safe functioning[1].
- A landlord gas safety check is a legal safety inspection, not a service; the industry has called for rented homes to get both[2].
- Only 62% of homes in England had a carbon monoxide alarm in 2024, so the service visit is a good moment to check[3].
Why customers ask what they are paying for
From the customer's side, a boiler service is an hour of someone working inside a box they cannot see into. Some have had services that took fifteen minutes and left no paperwork; others have had thorough visits that looked the same from the kitchen doorway. It is no surprise that 'what does a service actually include?' is one of the commonest questions heating firms get.
A clear answer helps everyone. Customers who understand the service value it, book it every year and trust your findings. This guide sets out what to tell them, and includes a checklist you can adapt and share.
The manufacturer sets the service, not a national list
Every boiler's installation and servicing instructions include a service schedule written for that model. That is the starting point for a proper service. A generic checklist cannot cover the differences between models, such as which seals must be replaced when the burner is removed, how the condensate trap is cleaned or what combustion readings are acceptable.
Tell customers this plainly: 'We service your boiler to the maker's instructions for this model, and we record what we did.' It explains why services on different boilers take different lengths of time and why some need parts.
What a typical service covers
- Ask about problems: noises, pressure loss, hot water issues, fault codes or anything the customer has noticed.
- Visual inspection of the boiler, flue, terminal and surroundings, including clearances, ventilation and signs of distress such as staining or water marks.
- Combustion analysis with a calibrated flue gas analyser to check the boiler is burning gas correctly.
- Gas pressure and, where needed, gas rate checks against the manufacturer's figures.
- Inspection, and cleaning where the instructions require, of the burner, heat exchanger, fan and electrodes.
- Cleaning the condensate trap and checking the condensate pipe.
- Checking seals and gaskets and replacing any that the instructions require.
- Testing safety devices and controls, and checking the expansion vessel and system pressure.
- Checking the heating water: inhibitor level and filter clean where fitted.
- Recording the results and explaining any findings.
The safety checks the law expects
Whenever someone works on a gas appliance, the Gas Safety (Installation and Use) Regulations require them to examine immediately afterwards the effectiveness of the flue, the supply of combustion air, the operating pressure or heat input, and the appliance's operation to make sure it is safe, and to notify the responsible person of any defect[1]. A service is work on the appliance, so those checks are part of it.
They matter because boilers are among the appliances the NHS lists as able to produce carbon monoxide when badly installed, faulty or poorly maintained[4]. Customers rarely ask about this directly, but it is the strongest reason to service every year.
Service, safety check and landlord record compared
| Visit | Purpose | Who needs it | Paperwork |
|---|---|---|---|
| Annual service | Maintain the boiler to the maker's instructions | Every gas boiler owner; often a warranty condition | Service record entry |
| Gas safety check | Confirm appliances, flues and pipework are safe | Landlords must have one at least every 12 months | Gas safety record |
| Landlord service and check together | Both of the above in one visit | Landlords who want reliability as well as compliance | Both records |
Landlords must have a registered engineer check each gas appliance and flue every year and give tenants the record before they move in or within 28 days of the check[5]. That check does not include servicing. The Heating and Hotwater Industry Council and the Energy and Utilities Alliance have called for the rented-home check to be upgraded to a full service plus a heating efficiency check[2], which reflects how often a check alone misses maintenance problems.
Carbon monoxide alarms: ask at every service
A service is the ideal moment to check for a carbon monoxide alarm. The English Housing Survey found that 62% of homes had one in 2024, up from 60% in 2023[3], so roughly four in ten still did not.
Source: Ministry of Housing, Communities and Local Government (GOV.UK), 2024[3]
Show the data
| Item | Value |
|---|---|
| 2023 | 60% |
| 2024 | 62% |
All carbon monoxide alarms in the UK must meet EN 50291-1:2018, although the rules on where alarms are required differ between England, Wales, Scotland and Northern Ireland[6]. If there is no alarm, recommend one and explain where it should go. If there is one, press the test button with the customer and check its expiry date.
What the customer should have afterwards
- A service record entry with the date, the engineer's name and registration number, and the combustion readings.
- A note of any parts replaced and why.
- Any defects found, how serious they are and what was done, in writing.
- Advice given, such as recommending a filter, scale protection or a carbon monoxide alarm.
- For landlords, a separate gas safety record if a check was also carried out.
- When the next service is due.
If something was classed as unsafe, the customer should receive a clear written warning, and the engineer should explain it in person. Never leave that to a line in an invoice.
Explaining findings without alarming people
Most services find something small. How you describe it decides whether the customer trusts you or feels sold to. Sort findings into three plain groups and say which group each one is in.
- Safety: anything that makes the appliance unsafe to use. Explain it in person, put it in writing and follow the unsafe situations procedure.
- Needs attention soon: worn parts or conditions likely to cause a breakdown, such as a weeping valve or a low expansion vessel charge. Give a separate quote and a realistic timescale.
- Worth knowing: things that are fine now but worth watching or improving, such as dark heating water or an ageing thermostat. Note them on the record without pressure.
Use the customer's words, not jargon. 'The part that keeps the pressure steady has lost its air charge, which is why you have been topping up the boiler' lands better than a part name and a price.
Worked Example: a checklist to share with customers
Before we arrive
Clear access to the boiler and note any problems you have noticed since the last service.
When we start
We will ask about any issues and check the area around the boiler and the flue outside.
During the service
We open the boiler, check how it burns gas with an analyser, clean and inspect parts as the maker requires, and test the safety devices.
Your heating water
We check the protective inhibitor and clean the filter if you have one.
Your safety
We check the flue and ventilation and ask whether you have a working carbon monoxide alarm.
Before we leave
We record the results, explain anything we found and tell you when the next service is due.
Example. A firm prints this on the back of its appointment confirmation. Customers know what to expect, have the boiler cupboard cleared before the engineer arrives, and are less likely to question the time a thorough service takes.
Customers in vulnerable situations
Older customers, people living alone, those with health conditions and households struggling with bills need a little more care at a service. They are often the people who most need their heating to be reliable and who are least able to cope with a sudden breakdown.
- Allow extra time to explain findings and leave a written summary in large, clear type.
- Check that they can use their controls and that the thermostat is somewhere they can reach.
- Test the carbon monoxide alarm with them and show them what the alarm sounds like.
- If you find a problem that leaves them without heating, treat getting it fixed as a priority and tell them when you will be back.
Signs a service was not really a service
- No flue gas analyser was used.
- The boiler case was never opened.
- No record was made or left.
- No questions were asked about problems.
- The engineer could not say what the readings showed.
Customers who have had visits like this are often the most grateful for a proper service. Explain what you did differently without criticising the previous engineer. See building a servicing round and fault-finding workflow.
Frequently asked questions
How long should a boiler service take?
It depends on the model and what the manufacturer's instructions require. A thorough service with combustion analysis, cleaning and recording takes longer than a quick visual check.
Is a gas safety certificate the same as a service?
No. A gas safety check confirms appliances and flues are safe; a service maintains the boiler to the manufacturer's instructions. Landlords need the check by law and often book both.
Do I need a service every year?
Manufacturers usually recommend annual servicing and many warranties require it. It is also when safety checks are made.
What should I receive after a service?
A service record with readings and the engineer's details, notes of parts and findings, any safety warnings in writing, and when the next service is due.
References
legislation.gov.uk (The National Archives) (1998). The Gas Safety (Installation and Use) Regulations 1998, regulation 26 (opens in a new tab) ↑
Heating and Hotwater Industry Council (HHIC) (2025). Call to enhance Gas Safety Checks (opens in a new tab) ↑
Ministry of Housing, Communities and Local Government (GOV.UK) (2024). English Housing Survey 2024 to 2025: Chapter 1, housing quality (opens in a new tab) ↑
NHS (2026). Carbon monoxide poisoning (opens in a new tab) ↑
GOV.UK (2026). Your landlord's safety responsibilities (opens in a new tab) ↑
Heating and Hotwater Industry Council (HHIC) (2025). A guide to carbon monoxide (CO) alarm legislation for heating engineers (opens in a new tab) ↑