Customer experience

Running late: how to tell the customer

When to warn a customer you are running late, what to say by phone or text, and how to offer a rebook that keeps their trust. Scripts and timing rules.

Ava research teamPublished 7 min read

On this page
  1. Why a late arrival hurts more than the minutes
  2. The trigger: when to send the message
  3. What to say: scripts for phone and text
  4. Offer a real choice
  5. Plan windows that survive the traffic
  6. Example: one overrun, three customers
  7. Find out why you are late
  8. Frequently asked questions
  9. References

Key takeaways

  • Tell the customer as soon as you know you will miss the window, not when you are already late.
  • Give a new time you can keep, a reason in one line and a genuine choice: wait, rebook or someone else.
  • Evening peak traffic on local A roads in England is the slowest part of the day, so plan afternoon windows with that in mind.
  • Track late arrivals weekly; repeated lateness is a scheduling problem, not a messaging one.

Why a late arrival hurts more than the minutes

A customer waiting for a plumber has usually rearranged something: a day working from home, a carer's visit, a child's pick-up. When the window passes in silence, the cost to them is not the half hour. It is the uncertainty, the call to the office that goes to voicemail and the feeling that their time does not count. Many complaints that end up being about price or workmanship started with a visit that began badly.

The government's consumer protection study found that problems with delivery, which for a service can mean turning up late, were behind 18% of the consumer problems people reported across all sectors[1]. People who had a delivery problem were more likely to say they felt anxious and helpless than those who did not. That is the emotion a late-running message needs to deal with: not just information, but a sense that someone is in control.

There is a legal angle too. Where no time is agreed, the Consumer Rights Act 2015 says a service must be performed within a reasonable time[2]. Once you have confirmed an arrival window, though, the customer will judge you against that window, and so will anyone reading a review.

The trigger: when to send the message

Most firms tell the customer too late. The engineer hopes the current job will finish on time, then hits traffic, then realises the window has gone. A simple trigger rule fixes this: the moment the engineer expects to arrive after the end of the window, the customer hears about it. Not when the window ends.

  1. Check at the halfway point of each job

    The engineer looks at the clock and the next booking. If the current job will overrun, they tell the office or send the message themselves.

  2. Apply the 15-minute rule

    If the expected arrival is more than 15 minutes after the window closes, contact the customer now.

  3. Phone first for vulnerable or urgent customers

    An elderly customer, a household without heating in winter or anyone on your vulnerability list gets a call, not just a text.

  4. Update again if it slips further

    One update is reassuring. Silence after a promised new time undoes all of it.

  5. Log the delay

    Note the cause against the job so you can spot patterns at the end of the week.

What to say: scripts for phone and text

Keep the structure the same every time: who you are, the honest reason in one line, a new time you can keep and a choice. Avoid long apologies and avoid excuses that sound rehearsed.

Phone script: 'Hello, it's Dan from Riverside Plumbing. I'm calling about your appointment this morning. The job before yours has taken longer than expected and I won't make the 10 to 12 window. I can be with you by about 12.45. If that doesn't work, I can rebook you for first thing tomorrow, or I can ask the office whether another engineer is free this afternoon. Which would suit you best?'

Text when the engineer cannot call: 'Riverside Plumbing: sorry, Dan is running late after an earlier job overran. New arrival time about 12.45 instead of 10 to 12. Reply 1 to keep this, 2 to rebook, or call 01234 567890 and we will sort it.' Use your real office number, and only offer reply options your office actually monitors.

Emergency in progress: 'We've had a gas emergency call that we have to attend first, so your visit is delayed. I'll call you by 2pm with a firm time.' Customers accept urgent safety work as a reason, as long as you do call back by the time you gave.

Never give a new time you are not confident of. A second missed time does more damage than one honest, longer estimate.

Offer a real choice

The rebook option has to be genuine. If the customer took the day off, a later arrival may be better than a new day. If they need to leave for the school run, a slot tomorrow morning may be better than a rushed visit at 3.30pm. Asking the question tells them you respect their time, and it gives you information you can use to reshuffle the rest of the diary.

Matching the rebook offer to the customer's situation
Customer situationBest offerWhy
Took a day off workKeep today, give a firm later timeRebooking costs them another day
Has a fixed commitment laterFirst slot tomorrow or a named dayA rushed visit is likely to overrun
No heating or hot water in cold weatherKeep today, consider a second engineerWaiting overnight may not be safe for them
Routine service, flexible customerLet them pick from two new slotsFrees today's diary for urgent work

Whatever the customer chooses, confirm it in writing straight away. A short text saying 'New time: about 12.45 today, Dan from Riverside Plumbing' or 'Rebooked: Wednesday 8am to 10am' removes any doubt about what was agreed. If the customer rebooks, release the old slot in the diary at once so the office can offer it to someone waiting for an earlier visit. And if you offered another engineer, make sure that engineer knows the job history before arriving, so the customer does not have to explain the fault twice.

Plan windows that survive the traffic

Many late arrivals are built into the diary before the day starts. Department for Transport figures for local A roads in England show average delay against free-flowing traffic was 48.3 seconds per vehicle per mile in 2024, up 3.4% on 2023[3]. Delay was worst in the weekday evening peak, at 65.4 seconds per vehicle per mile, against 22.9 seconds in the off-peak hours[3].

Average delay on local A roads in England by time of day, 2024Seconds per vehicle per mile compared with free-flowing traffic
Average delay on local A roads in England by time of day, 2024Column chart. Morning peak 7am-10am: 56.2 sec; Inter peak 10am-4pm: 51.4 sec; Evening peak 4pm-7pm: 65.4 sec; Off peak 7pm-7am: 22.9 sec.0 sec20 sec40 sec60 sec80 secMorning peak 7am-10am: 56.2 sec56.2 secMorning peak 7am-10amInter peak 10am-4pm: 51.4 sec51.4 secInter peak 10am-4pmEvening peak 4pm-7pm: 65.4 sec65.4 secEvening peak 4pm-7pmOff peak 7pm-7am: 22.9 sec22.9 secOff peak 7pm-7amAverage delay on local A roads in England by time of day, 2024Column chart. Morning peak 7am-10am: 56.2 sec; Inter peak 10am-4pm: 51.4 sec; Evening peak 4pm-7pm: 65.4 sec; Off peak 7pm-7am: 22.9 sec.0 sec20 sec40 sec60 sec80 secMorning peak 7am-10am: 56.2 sec56.2 secMorningpeak7am-10…Inter peak 10am-4pm: 51.4 sec51.4 secInterpeak10am-4…Evening peak 4pm-7pm: 65.4 sec65.4 secEveningpeak4pm-7pmOff peak 7pm-7am: 22.9 sec22.9 secOffpeak7pm-7am

Source: Department for Transport (GOV.UK), 2025[3]

Show the data
ItemValue
Morning peak 7am-10am56.2 sec
Inter peak 10am-4pm51.4 sec
Evening peak 4pm-7pm65.4 sec
Off peak 7pm-7am22.9 sec
  • Give wider windows for afternoon visits that need travel across town after 4pm.
  • Put long or uncertain jobs, such as diagnosis on an old system, at the start of the day or the end of a route.
  • Leave one gap of an hour in each engineer's day for overruns and urgent calls.
  • Group jobs by area so a single overrun does not push three visits on opposite sides of the patch.
  • Allow for longer, slower working days in winter, when breakdowns pile up.

Employee plumbers and heating installers already work a median of 40 paid hours a week, more than the 36.9 for all UK employees[4]. Squeezing an extra visit into the end of a long day is a common cause of late evening arrivals, and of tired engineers making mistakes.

Example: one overrun, three customers

Example: at 10.40am a fictional engineer, Priya, finds that a radiator valve replacement needs a drain-down she had not planned for. Her next booking is a boiler service with a 11am to 1pm window, then a tap repair from 2pm to 4pm across town. At the halfway point she messages the office: about 45 minutes behind.

The office rings the boiler-service customer, who works from home and is happy with a 1.30pm arrival. The tap-repair customer has to collect a child at 3.15pm, so the office offers a slot the next morning, which she accepts. The rest of Priya's afternoon now has room for the drain-down and a safe drive. In this example nobody is left waiting without news, and the only complaint risk, the school-run customer, has been handled by phone before she started watching the window.

Find out why you are late

Messaging well does not fix a diary that runs late every day. Once a week, look at the delay notes and count the causes. If most delays come from underestimated diagnostic visits, give them longer slots. If they come from one route, change the zoning. If they come from parts runs, carry more common stock. A late message is a sign that the plan broke; the weekly review is where you repair the plan.

  1. Count late arrivals per engineer per week, and the average minutes late.
  2. Group causes: overrun, traffic, parts, emergency diverted, late start.
  3. Change one thing at a time, such as slot length for first visits, and watch the count for a month.
  4. Share the numbers with engineers so they can suggest fixes; they know which jobs always take longer.

Finally, be honest with yourself about the arrival windows you promise. A two-hour window that is met nine times out of ten builds more trust than a one-hour window that is missed every other day. If your review shows you regularly overrun in the afternoon, widen those windows and say why when you book: 'Afternoon visits get a three-hour window because of school-run traffic.' Customers tend to accept a clear reason given in advance far more readily than an apology given on the day.

Frequently asked questions

How late is too late before I contact the customer?

As soon as you expect to arrive after the end of the agreed window, tell them. Many firms use 15 minutes past the window as the latest trigger, but earlier is better.

Should the engineer or the office send the message?

Whoever can do it fastest and safely. Engineers should never text while driving, so a quick message to the office asking them to call the customer is often the best route.

Should I offer a discount for being late?

It is not required, and it can look like a habit. A sincere apology, a reliable new time and a real choice usually matter more to customers than money off.

What if the customer cancels because we were late?

Accept it gracefully, offer a new slot and record the reason. Charging a late-cancellation fee when your own delay caused the cancellation is likely to be seen as unfair.

References

  1. Department for Business, Energy and Industrial Strategy (GOV.UK) (2022). Consumer protection study 2022: understanding the impacts and resolution of consumer problems (opens in a new tab) ↑

  2. legislation.gov.uk (The National Archives) (2015). Consumer Rights Act 2015, section 52 (opens in a new tab) ↑

  3. Department for Transport (GOV.UK) (2025). Travel time measures for local 'A' roads: January to December 2024 report (opens in a new tab) ↑

  4. Office for National Statistics (2026). Annual Survey of Hours and Earnings 2026 provisional, Table 14 (occupation by 4-digit SOC 2020) (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo