Technology AI

Route planning to cut miles between jobs

Cut dead miles between plumbing and heating jobs by zoning your area, giving postcodes set days and booking routine work where vans already are.

Ava research teamPublished 6 min read

On this page
  1. Where van miles go
  2. Put a figure on dead miles
  3. Zone the map, then give each zone days
  4. An example zone-day plan
  5. Booking is where routes are won
  6. Routing apps: what they do well
  7. Parking, access and the first job of the day
  8. Bringing the team with you
  9. Electric vans change the planning
  10. Worked example: what zoning saves
  11. Measure before and after
  12. Frequently asked questions
  13. References

Key takeaways

  • Most van miles in Great Britain are driven on A roads and minor roads, the local driving that route planning can actually reduce.
  • Zoning by area and by day saves more miles than any clever routing app on a scattered diary.
  • Book routine work by postcode day at the point of the call; that is where routes are won or lost.
  • Keep urgent capacity outside the zones so emergencies do not wreck the plan.
  • Measure miles per job and jobs per day before and after, or you will not know if it worked.

Where van miles go

Vans covered 58.8 billion vehicle miles in Great Britain in 2025, 10% more than in 2019[1]. Of those miles, 42% were on A roads and 35% on minor roads, with only 22% on motorways[1]. For a heating engineer that split is familiar: short hops between estates, school-run traffic and side streets with nowhere to park. Those are exactly the miles a better plan can remove.

Van traffic in Great Britain by road type, 2025
Van traffic in Great Britain by road type, 2025Stacked bar chart. A roads: 25 billion vehicle miles; Minor roads: 20.8 billion vehicle miles; Motorways: 13 billion vehicle miles.A roads: 25 billion vehicle miles (43%)Minor roads: 20.8 billion vehicle miles (35%)Motorways: 13 billion vehicle miles (22%)Van traffic in Great Britain by road type, 2025Stacked bar chart. A roads: 25 billion vehicle miles; Minor roads: 20.8 billion vehicle miles; Motorways: 13 billion vehicle miles.A roads: 25 billion vehicle miles (43%)Minor roads: 20.8 billion vehicle miles (35%)Motorways: 13 billion vehicle miles (22%)
  • A roads 25 billion vehicle miles 43%
  • Minor roads 20.8 billion vehicle miles 35%
  • Motorways 13 billion vehicle miles 22%

Source: Department for Transport (GOV.UK), 2026[1]

Show the data
ItemValue
A roads25 billion vehicle miles
Minor roads20.8 billion vehicle miles
Motorways13 billion vehicle miles

Van numbers are still rising. 81,644 new vans were registered in the UK in April to June 2026, up 8.8% on a year earlier[2], so local roads are not getting any quieter.

Put a figure on dead miles

HMRC's approved mileage rate, the tax-free amount an employer can pay staff who use their own car or van for work, is 55p a mile for the first 10,000 business miles in 2026 to 2027 and 25p after that[3]. It is not the true cost of running your van, but it is a fair yardstick when you want to show the team why a tidier diary matters.

Dead miles also cost time. Engineers already work long weeks: employee plumbers and heating and ventilating installers had median total paid hours of 40 a week in 2026, against 36.9 for all employees[4]. Every 20 minutes in traffic between jobs is 20 minutes not spent on paid work, and in a week of breakdowns those minutes decide whether the last job of the day happens or rolls to tomorrow.

Zone the map, then give each zone days

Route optimisation software reorders the jobs you already have. Zoning changes which jobs you have on a given day, which is where the bigger saving sits. The method is simple.

  1. Plot a year of jobs

    Export last year's completed jobs with postcodes and drop them on a map. Most job systems and free mapping tools can do this.

  2. Draw four to six zones

    Group postcode districts that are quick to drive between. Follow rivers, ring roads and bridges, not council boundaries.

  3. Give each zone routine days

    For example, north zone on Mondays and Thursdays. Busier zones get more days.

  4. Match engineers to zones

    Engineers who live in or near a zone start there, which shortens the first and last drive of the day.

  5. Write the rule into booking

    Whoever takes the call offers the next zone day for that postcode first, and a different day only if the customer cannot do it.

  6. Review every quarter

    New estates, a lost contract or a new letting agent can shift demand between zones.

An example zone-day plan

Example zone plan for a fictional four-van firm
ZonePostcode districtsRoutine daysNotes
NorthFour districts around the ring roadMonday, ThursdayTwo letting agents' portfolios
EastThree districts and two villagesTuesdayLong drives; book back-to-back
CentreTown centre and terracesWednesday, FridayParking permits in the van
SouthTwo districts and an industrial estateTuesday, ThursdayCommercial work mornings only
FloatingAnyEvery dayOne engineer kept for urgent calls

The floating engineer is the important line. Breakdowns do not respect zones, so one person, or one slot per engineer, stays free for urgent calls each day and is released to routine work the afternoon before if nothing comes in.

Booking is where routes are won

A route is mostly decided when the phone is answered. If the person on the call offers any free slot, the diary scatters. If they offer the next zone day first, it clusters. Give office staff a short script.

Script: “Thanks. For your postcode our engineers are next in your area on Thursday, morning or afternoon. Would either suit? If not, I can find another day, it may just be a little later.”

Most customers booking an annual service or a landlord safety check are happy with a set day if it is offered confidently. Urgent calls are different: they go to the floating capacity and are never pushed to the next zone day.

Routing apps: what they do well

  • Order a day's jobs to cut driving, while respecting fixed time windows.
  • Show realistic road travel time between jobs, not straight-line distance.
  • Re-plan the rest of the day when an urgent job is added.
  • Send customers an on-the-way message with a rough arrival time.
  • Report miles and drive time per engineer so you can compare weeks.

Check two things before you trust the output: that the app knows each engineer's start and finish location, and that it handles parts collection stops at the merchant. A route that ignores the morning trip to the merchant is fiction.

Parking, access and the first job of the day

Distance is only part of the picture. Ten minutes circling for a parking space in a terrace street, or waiting at a block of flats for a caretaker, can cost more than an extra five miles on an A road. Record access notes and parking details against each property, and put them where the routing tool and the engineer can both see them.

  • Note permit zones, loading bays and the best place to park for each regular property.
  • Book town-centre jobs outside school-run and rush-hour peaks where customers allow it.
  • Start each engineer's day with a job near home, not near the yard, unless they need to collect parts.
  • Group merchant visits: one collection run for the team rather than every van calling in each morning.
  • For flats and managed blocks, confirm access the day before so a wasted trip does not wreck the route.

Bringing the team with you

Engineers know the roads better than any app, and they will spot a bad zone boundary in a day. Show them the job map before you draw zones and ask where the traffic actually is. Explain that the aim is fewer wasted hours, not more jobs squeezed into the same day, and share the before-and-after figures with them. If a zone plan makes someone's day consistently longer, change it.

Office staff matter just as much, because they control the booking rule. Put the zone days on a single printed sheet next to the phone, and review a week of bookings together to see how often the first offer was accepted.

Electric vans change the planning

Zero emission vans made up 10.5% of new van registrations in April to June 2026[2]. If you run one, add range and charging to the plan: put the longest zone on days after an overnight charge, avoid stacking long rural runs with cold-weather heater use, and note which merchants or customers' sites have charging. Zoning helps here too, because predictable days mean predictable mileage.

Worked example: what zoning saves

Example: a fictional engineer does five routine jobs a day across a scattered diary and drives 70 miles. After zoning, the same five jobs sit in two neighbouring districts and the day's driving falls to 40 miles. That is 30 miles a day, or about 600 miles over a 20-day month, and roughly an hour of driving saved each day. The firm uses some of that hour to fit a sixth short job, such as a radiator valve or a service, on three days a week.

The figures here are invented for illustration. Your own saving depends on how scattered the diary is now; the only way to know is to measure.

Measure before and after

  • Miles per completed job, per engineer, per week.
  • Jobs completed per engineer per day.
  • Share of routine bookings made on the zone day offered first.
  • First-visit fix rate, so you do not trade miles for return visits.
  • Late arrivals against the window given to the customer.

Take four weeks of figures before zoning and four after, in similar weather. If van tracking is part of the plan, read the guide on van tracking and staff concerns first, and see scheduling and dispatch tools for the board that holds the plan together.

Frequently asked questions

What is the quickest way to reduce miles between jobs?

Give each area of your patch set routine days and offer the next area day when customers book. That clusters jobs before any routing app gets involved.

Do I need route planning software?

Not at first. Zoning and a booking rule can be done with a map and a spreadsheet. Software helps once you run several vans and need to re-plan the day when urgent jobs arrive.

Will customers accept a set day for their area?

For services, safety checks and routine repairs most will if it is offered clearly with a choice of morning or afternoon. Urgent work should never wait for a zone day.

How do I handle emergencies with a zoned diary?

Keep one floating engineer or one slot per engineer free each day for urgent calls, and release it to routine work the afternoon before if it is still free.

References

  1. Department for Transport (GOV.UK) (2026). Road traffic estimates in Great Britain, 2025: Traffic in Great Britain by vehicle type (opens in a new tab) ↑

  2. Department for Transport (GOV.UK) (2026). Vehicle licensing statistics: April to June 2026 (opens in a new tab) ↑

  3. HM Revenue and Customs (GOV.UK) (2026). Travel: mileage and fuel rates and allowances (opens in a new tab) ↑

  4. Office for National Statistics (2026). Annual Survey of Hours and Earnings 2026 provisional, Table 14 (occupation by 4-digit SOC 2020) (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo