Phones call handling

How to cut no-access visits and wasted journeys

Why plumbing visits fail at the door, a prevention routine from booking to arrival, and how to set a fair no-access fee that UK consumer law will uphold.

Ava research teamPublished 6 min read

On this page
  1. Why visits fail at the door
  2. What a failed visit costs
  3. A prevention routine, from booking to arrival
  4. Landlord gas safety checks: the hotspot
  5. At-the-door protocol
  6. Track the causes, not just the count
  7. A fair no-access fee
  8. Example: one quarter's results
  9. Frequently asked questions
  10. References

Key takeaways

  • Most no-access visits are preventable: confirm who will be in on the booking call, remind the day before and message on the way.
  • Landlord gas safety checks are a hotspot, because the check is due within 12 months and the tenant, not the landlord, opens the door[1].
  • A failed visit costs paid engineer time; median hourly pay for employee plumbers was about £18.82 in 2026 before other costs[2].
  • A no-access fee must be in terms agreed in advance and fair; an unfair term is not binding on a consumer[3].
  • Keep any fee proportionate to your real loss; a disproportionately high sum may be unfair[4].

Why visits fail at the door

A no-access visit is the most frustrating failure in a plumbing firm's day: the engineer drives across town, parks, knocks and gets no answer. The slot is gone, the next job may be too far away to bring forward, and the customer will still need the work doing. Most firms accept a few as a fact of life. They are less inevitable than they look, because most have a small number of predictable causes.

  • The customer forgot, or thought the visit was a different day.
  • The person who booked is not the person who lives there, and the occupant was never told.
  • The customer popped out because the window was long and nobody said when the engineer was coming.
  • Access details were missing: the wrong flat, a locked gate, a key with a neighbour nobody mentioned.
  • The customer rearranged with someone who did not update the diary.
  • The customer found another firm and did not cancel.

Every one of those can be headed off by something the firm does before the engineer sets off. The fee policy at the end of this article is the last resort, not the first.

What a failed visit costs

Add up the journey, the slot and the knock-on effects. The median gross hourly pay of employee plumbers and heating and ventilating installers in the UK was about £18.82 in 2026, close to the £19.00 median for all employees[2]. That is before employer National Insurance, pension, van, fuel and the parts already loaded for the job.

Median gross hourly pay, UK employees, 2026Annual Survey of Hours and Earnings, provisional
Median gross hourly pay, UK employees, 2026Comparison. Plumbers and heating and ventilating installers: £18.82; All employees: £19.£18.82Plumbers and heating and ventilatinginstallersPlumbers and heating and ventilating installers: £18.82£19All employeesAll employees: £19Median gross hourly pay, UK employees, 2026Comparison. Plumbers and heating and ventilating installers: £18.82; All employees: £19.£18.82Plumbers and heating and ventilatinginstallersPlumbers and heating and ventilating installers: £18.82£19All employeesAll employees: £19

Source: Office for National Statistics, 2026[2]

Show the data
ItemValue
Plumbers and heating and ventilating installers£18.82
All employees£19

Example: a fictional firm with three engineers logs two no-access visits a week, each costing about an hour and a quarter of paid time once travel and the gap in the diary are counted. Over a year that is well over a hundred hours of engineer time, before fuel, and before counting the paid jobs that could have filled those slots in winter.

A prevention routine, from booking to arrival

  1. Ask who will be in

    On the booking call, ask who will open the door and their mobile number. For rented homes, get the tenant's details, not just the landlord's.

  2. Capture access details

    Flat number, entrance, gate codes, parking, pets, key safe or a neighbour with a key. Write them on the job, not in someone's notebook.

  3. Confirm in writing

    Send the day, window, address and access notes, plus how to rearrange and any no-access fee, straight after the call.

  4. Remind the day before

    A message the afternoon before catches people who forgot or whose plans changed, while there is still time to rearrange.

  5. Contact the occupant directly

    For landlord and agent bookings, send the reminder to the tenant too.

  6. Message on the way

    When the engineer leaves the previous job, send a realistic arrival time.

  7. Follow the at-the-door protocol

    Knock, ring the occupant, message, wait a set time and photograph the visit before leaving.

Landlord gas safety checks: the hotspot

Annual gas safety checks in rented homes produce a large share of no-access visits for many heating firms. Landlords must have each gas appliance and flue checked within 12 months of installation and at intervals of not more than 12 months[1], so they book in bulk and against deadlines, often through agents. The tenant, who has to open the door, may hear about the visit last.

  • Ask the landlord or agent to confirm the tenant has been told before you book.
  • Contact the tenant directly with the window and a reminder, and offer to rearrange with them.
  • Book landlord checks in narrower windows where you can; tenants are more likely to stay in for two hours than four.
  • Record every attempt: date, time, how you tried to contact the tenant and what happened. The landlord will need that record if access keeps failing.

At-the-door protocol

  1. Knock and ring; check you are at the right door and the right flat.
  2. Ring the occupant's number from the business line, then the person who booked.
  3. Send the at-the-door message with how long you can wait.
  4. Wait the time stated in your policy, often ten to fifteen minutes.
  5. Photograph the front door and house number, with the time showing, for your records.
  6. Leave a card, ring the office, and let the office contact the customer to rebook.

The photograph and call log protect both sides. If the customer says they were in all morning, you can show what happened; if your engineer went to the wrong address, you will know that too.

Track the causes, not just the count

Knowing you had nine no-access visits last month tells you there is a problem. Knowing why each one happened tells you what to fix. Add a short reason code to every failed visit and review them monthly with whoever books the diary.

  • Forgot or wrong day: strengthen the day-before reminder, or send it to a second contact.
  • Occupant not told: contact tenants directly and ask agents to confirm before booking.
  • Popped out: send on-my-way messages earlier or narrow the window.
  • Access details missing: add mandatory access questions to the booking script.
  • Rearranged but not updated: make sure every channel that takes changes updates the same diary.
  • Booked elsewhere: ask for cancellations explicitly in the reminder.

Patterns usually appear quickly. One agent whose tenants are never told, one postcode with confusing flat numbers, one engineer who does not ring ahead. Each is a small, specific fix once you can see it, and each fix is worth far more than any fee you might charge.

A fair no-access fee

Some firms charge a fee when an engineer turns up at an agreed time and cannot get in. That can be reasonable, but with consumers it has to pass the fairness rules in the Consumer Rights Act 2015. An unfair term of a consumer contract is not binding on the consumer, and a term is unfair if, contrary to the requirement of good faith, it causes a significant imbalance in the parties' rights and obligations to the detriment of the consumer[3]. The Act's list of terms that may be regarded as unfair includes requiring a consumer who fails to fulfil their obligations to pay a disproportionately high sum in compensation[4].

Elements of a no-access fee policy designed to be fair
ElementWhy it matters
Agreed in advance, in writingA fee the customer never saw is hard to justify
Prominent, not buriedMention it on the call and in the confirmation
Proportionate to your real lossLinked to the cost of the wasted visit, not a penalty
A clear rearrangement deadlineCustomers who rearrange in time pay nothing
Reminder sent before the visitShows you gave a fair chance to rearrange
Discretion for emergencies and vulnerabilityIllness, bereavement and genuine emergencies happen

Applied this way, a fee is rarely needed, because the routine prevents most failed visits and customers who know about the fee tend to rearrange in time. Take advice on the wording of your own terms; this is general information, not legal advice. For business customers such as landlords and agents, agree no-access terms in your commercial terms of business.

Example: one quarter's results

Example: a fictional heating firm with many landlord customers started asking agents to confirm tenants had been told, sent reminders to tenants directly, and introduced a modest no-access fee stated on every confirmation, waived the first time for any customer. No-access visits fell sharply over the following three months. The firm charged the fee a handful of times, almost always to landlords who had not passed on the appointment, and two agents changed their own process as a result.

The Example firm also found that the fee was less important than the conversation it prompted. Mentioning it on the booking call made customers think about whether they would really be in, and some chose a different day there and then. That single question did more to cut wasted journeys than any charge.

Frequently asked questions

Can a plumber charge for a missed appointment?

Yes, if the fee was agreed in advance, is clearly explained and is proportionate to the real cost of the wasted visit. Hidden or excessive fees may be unfair and not binding on consumers.

How long should an engineer wait if nobody answers?

Set a fixed time in your policy, often ten to fifteen minutes, during which the engineer calls and messages the occupant. State it in your confirmation so customers know.

Why do landlord gas safety checks fail so often?

The landlord books the check but the tenant has to open the door, and tenants are often told late or not at all. Contacting the tenant directly and confirming they know about the visit makes a big difference.

References

  1. legislation.gov.uk (The National Archives) (1998). The Gas Safety (Installation and Use) Regulations 1998, regulation 36 (opens in a new tab) ↑

  2. Office for National Statistics (2026). Annual Survey of Hours and Earnings 2026 provisional, Table 14 (occupation by 4-digit SOC 2020) (opens in a new tab) ↑

  3. legislation.gov.uk (The National Archives) (2015). Consumer Rights Act 2015, section 62: requirement for contract terms and notices to be fair (opens in a new tab) ↑

  4. legislation.gov.uk (The National Archives) (2015). Consumer Rights Act 2015, Schedule 2: consumer contract terms which may be regarded as unfair (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo