Key takeaways
- Decide who should answer each kind of call before choosing ring settings: new enquiries, existing jobs, agents, suppliers and emergencies.
- Engineers on site or driving should be the last line, not the first. Route to the office first, then overflow, then the on-call engineer for urgent calls.
- Use simultaneous ring for a small office, sequential hunting for a clear order of responsibility, and time-of-day rules for out of hours.
- Every missed call needs one named owner for the call-back and a deadline, recorded where everyone can see it.
- Test the routing as a customer would, from a mobile, at different times of day, after every change.
When everyone's phone rings, nobody answers
Most plumbing and heating firms are small: around 95% of registered UK firms in the trade have fewer than ten employees[1], and only 2,270 have between 10 and 49[2]. In a firm of three to eight people, routing often grows by accident. The main number rings the owner's mobile, then someone adds the office, then two engineers ask to be included so they do not miss work. Soon every call rings five phones at once, each person assumes someone else will pick up, and the caller hears ringing until voicemail.
Good routing is not about expensive kit. Almost every hosted phone system, and many mobile business plans, offer the same handful of settings. The work is deciding who should answer which calls, in what order, and who calls back when nobody does.
Who should answer what
| Type of call | Rings first | Then | Owns the call-back |
|---|---|---|---|
| New domestic enquiry | Office | Overflow service or owner | Office |
| Existing job, customer chasing | Office | Voicemail with call-back promise | Office, then the engineer if technical |
| Letting agent works order | Office or the person who manages agents | Office voicemail | Agent manager |
| Supplier or merchant | Office | Voicemail | Office |
| Out-of-hours emergency | On-call engineer | Backup engineer | On-call engineer |
| Engineer calling the office | Office direct line | Owner | Office |
If you have no office staff, replace 'office' with whoever does admin that day, and lean more heavily on overflow. The principle stays the same: one person or service is first in line for each type of call, and engineers on jobs are protected from routine calls.
Ring strategies, explained
| Strategy | How it works | Good for | Watch out for |
|---|---|---|---|
| Simultaneous ring group | Several phones ring at once; first to answer gets the call | Two or three people in one office | Everyone assumes someone else will answer |
| Sequential hunt group | Phones ring one after another in a fixed order | Clear responsibility: office first, then owner | Long total ring time if the list is long |
| Round robin | Calls rotate between people | Sharing new enquiries fairly | Callers may reach someone without context |
| Time-of-day rules | Different routing by hour and day | Switching to the on-call rota at night | Bank holidays and clock changes |
| Overflow | Calls go elsewhere when busy or unanswered | Lunch, peaks, evenings | Make sure the overflow knows your rules |
For most firms the best default is a short sequential hunt: the office phone for a set number of rings, then a second office phone or the owner, then overflow. Keep the total ringing time before overflow short. Callers with a leak do not wait long.
Protect engineers on site and on the road
Engineers are the scarcest resource in the business. Of the 176,000 employees in Great Britain's plumbing and heating installation industry in 2024, 152,000 worked full time and 24,000 part time[3], and employee plumbers work median paid hours of 40 a week against 36.9 for all employees[4]. Every routine call an engineer answers under a sink costs time on a paying job and risks a rushed conversation with a customer.
- Full time 152,000 employees 86%
- Part time 24,000 employees 14%
Source: Office for National Statistics (Nomis), 2024[3]
Show the data
| Item | Value |
|---|---|
| Full time | 152,000 employees |
| Part time | 24,000 employees |
Take engineers out of the daytime ring group altogether, or put them at the end of a hunt list for urgent calls only. Give them a direct line to the office instead, so they can call in parts and job updates without queuing behind customers. When an engineer does take a customer call, the rule is simple: take the name, number and problem, promise a call-back from the office, and pass it on.
Overflow and out of hours
Overflow is where small firms win or lose calls at busy times. Set a busy-or-unanswered rule that sends calls to an answering service, a second office, or an AI employee such as Ava, which answers in your firm's name, takes down the job and, for urgent calls, follows your rota: engineer on call first, then the backup, then a clear next step if nobody answers. After hours, use a time-of-day rule to switch the main number to the out-of-hours route automatically, rather than relying on someone remembering to change a setting at 5.30pm.
Whatever handles overflow needs the same information as your office: your area, your job types, what counts as urgent and who is on call tonight. Update the rota in one place and make sure the routing reads from it.
Every call-back needs one owner
Missed calls are only a problem when nobody calls back. In multi-person firms, the commonest failure is not a missed call but a missed call that three people saw and nobody returned. Set these rules:
- Missed calls and voicemails land in one shared place, such as a team inbox or job board, not on individual phones.
- The first-in-line person for that call type owns the call-back, by default.
- Ownership is visible: whoever is calling back marks the message so nobody duplicates it.
- Each call type has a call-back deadline: within the hour for urgent, the same day for new enquiries.
- At the end of each day, someone checks for unowned or unreturned calls.
Direct lines and personal mobiles
Customers love having an engineer's mobile number, and engineers often hand it out to be helpful. Over time it means work arriving on phones the office cannot see, jobs booked into nobody's diary, and customers stranded when that engineer is on holiday or leaves. Give engineers business numbers that sit inside the phone system, ask them to steer customers to the main number for bookings, and if a customer calls an engineer directly about a new job, have the engineer log it with the office the same day.
Should you add a phone menu?
A short menu ('press 1 for a new enquiry, 2 about an existing job, 3 for accounts') can send calls to the right person and keep engineers' updates away from new customers. It also adds delay and annoys people with a leak. If you add one, keep it to two or three options, put the urgent option first, make the greeting brief, and let callers who press nothing reach a person rather than looping. Many small firms are better off without a menu during the day and with a single 'press 1 for an emergency' option out of hours. Check your call statistics after any change: a rise in abandoned calls usually means the menu is too long.
Give whoever answers the context
Routing a call to the right person is only half the job; that person also needs to know who is calling. If your phone system can show the caller's name from your customer list, or link to your job-management software, switch it on, so the office can see that it is, say, a returning customer with a boiler service booked for Thursday before saying hello. Where that is not possible, a quick search of the job system by phone number at the start of the call does the same thing. For engineers' direct lines, ask them to save the office numbers and key suppliers, so they can safely let unknown numbers go to voicemail while on a job and return them at the next break.
Set it up in a morning
Map call types
List the six or seven kinds of call you get and who should answer each, using the table above.
Build the daytime route
Create a short hunt group with the office first, then the second answerer, then overflow.
Build the night route
Add a time-of-day rule that switches to the out-of-hours greeting and on-call routing.
Give engineers direct lines
Take them out of the customer ring group and give them a number for calling the office.
Set up the shared log
Route missed calls and voicemails to one shared inbox or board with an owner field.
Write the call-back rules
Deadlines per call type, who owns what, and the end-of-day check.
Test it like a customer
- Ring the main number from a mobile during office hours and time how long until a human answers.
- Ring while the office line is busy and check the call reaches overflow.
- Ring at lunchtime, at 5.45pm and on a Saturday morning.
- Ring the out-of-hours number with a pretend emergency and check the on-call engineer's phone rings.
- Leave a voicemail and check it lands in the shared log with an owner.
- Repeat after any change, after the clocks change and before each bank holiday.
Example: from five ringing phones to one clear route
Example: a fictional six-person firm had every call ringing the owner, the office manager and four engineers at once. The office manager often let calls ring, assuming an engineer would take them; engineers answered on jobs and promised times they could not check. The firm switches to a sequential hunt (office manager, then owner, then an overflow service), gives engineers direct lines to the office and sets an evening rule for the on-call engineer. Missed calls now land in one shared inbox. Within a few weeks, the owner notices fewer double bookings and far fewer 'nobody called me back' complaints. Next, the office adds standard texts for booked visits, using ideas from confirmation message templates.
Frequently asked questions
What is the difference between a ring group and a hunt group?
A ring group rings several phones at once and the first to answer takes the call. A hunt group rings phones one after another in a set order, which makes responsibility clearer.
Should engineers be in the main ring group?
Usually not during the day. Route customer calls to the office and overflow first, and give engineers direct lines for calling in. Bring them in for urgent out-of-hours calls through the on-call rota.
How long should the phone ring before overflow?
Keep it short, especially for urgent plumbing calls. Test the total ring time from a mobile and shorten long hunt lists.
How do we stop missed calls falling through the cracks?
Send missed calls and voicemails to one shared place, give each call type a default owner and a call-back deadline, and check for unreturned calls at the end of each day.
References
Office for National Statistics (Nomis) (2026). UK Business Counts - enterprises by industry and employment size band (SIC 2007 class 43.22), via Nomis (opens in a new tab) ↑
Office for National Statistics (Nomis) (2026). UK Business Counts - enterprises by industry and employment size band (SIC 2007 class 43.22), via Nomis (opens in a new tab) ↑
Office for National Statistics (Nomis) (2024). Business Register and Employment Survey: open access (SIC 2007 class 43.22), via Nomis (opens in a new tab) ↑
Office for National Statistics (2026). Annual Survey of Hours and Earnings 2026 provisional, Table 14 (occupation by 4-digit SOC 2020) (opens in a new tab) ↑