Marketing leads

Writing case studies of real jobs

How plumbing and heating firms write case studies that win bigger jobs: a seven-part structure, customer permission, honest numbers and where to use them.

Ava research teamPublished 7 min read

On this page
  1. Why case studies win bigger jobs
  2. What readers actually want to see
  3. Choosing which jobs to write up
  4. A seven-part structure
  5. Getting permission the right way
  6. Writing it so people finish it
  7. Heat pump case studies and the numbers people compare
  8. Worked example outline
  9. Where to publish and reuse
  10. Common mistakes
  11. Frequently asked questions
  12. References

Key takeaways

  • Case studies win the larger jobs, such as boiler replacements, bathrooms and heat pumps, where customers want to see how you handle a whole project.
  • Use a fixed structure: the home, the problem, the options, the decision, the work, the result, and the customer's own words.
  • Get written permission for the story, the photos and any quote, and keep the evidence that the testimonial is genuine.
  • Include real numbers (output, days on site, disruption) and, with permission, the cost range; explain why a job differed from typical figures.
  • Publish on your website first, then reuse the case study in quotes, social posts and newsletters.

Why case studies win bigger jobs

For a dripping tap, nobody reads a case study. For a new boiler, a full bathroom or a heat pump, customers are about to spend a large sum and let you into their home for days. They want to know how you think, how you handle surprises and what it is like to have you in the house. A case study answers those questions better than a list of services or a row of stars.

There is a reason customers are cautious. In the government's consumer protection study, house and garden maintenance and repair, which includes plumbing and central heating, had a median net monetised consumer detriment of £109 per problem, among the ten highest of any UK sector[1]. A well-documented job from start to finish is one of the clearest ways to show you are not a risk.

What readers actually want to see

  • A home like theirs: the property type, age and layout, so they can picture it.
  • The problem in the customer's words: 'the boiler kept losing pressure and the upstairs radiators were never properly warm'.
  • The options you considered and why you recommended one, including the ones you advised against.
  • How long it took, what disruption there was and how you kept the house usable.
  • What went wrong and how you dealt with it. A corroded pipe behind a cupboard, a delayed part, a flue that had to move.
  • The result in practical terms: hot water flow, warmer rooms, a freed-up cupboard, lower servicing hassle.
  • What the customer said, in their own words, with their permission.

Notice that most of this is about decisions and experience, not about the brand of boiler. That is what separates your story from a manufacturer's brochure.

Choosing which jobs to write up

Not every good job makes a good case study. Pick the jobs that match the work you want more of, in the areas you want to work in, and that show a decision a customer would recognise from their own home.

  • Match your target work. If you want more system upgrades and fewer emergency repairs, write up system upgrades.
  • Spread them across your area. A case study from each main town or district you cover tells readers you work near them.
  • Cover the common property types: terraces, 1930s semis, post-war estates, new-build flats. Readers look for a home like theirs.
  • Include at least one awkward job. A cramped loft conversion or a listed building shows you can handle difficulty.
  • Prefer jobs with a clear before-and-after. Hidden work such as a gas pipe reroute is harder to show than a rebuilt airing cupboard.
  • Choose happy customers who communicate well; they will approve drafts quickly and their words will read naturally.

A realistic target for a small firm is one case study a month. After a year you have a dozen stories covering your main services and districts, which is enough for most customers to find one that looks like their own situation.

A seven-part structure

A structure that works for most plumbing and heating case studies
PartWhat to includeRough length
HeadlineJob type and district, e.g. 'Combi swap and system clean in a 1930s semi, Harborne'One line
The homeProperty type, age, occupants' needs (no names unless agreed)Two sentences
The problemWhat the customer noticed and what you found on surveyA short paragraph
The optionsTwo or three options considered, with trade-offsA short paragraph or list
The workWhat was done, days on site, how disruption was managed, any surprisesTwo short paragraphs
The resultPractical outcomes and handoverA short paragraph
In their wordsA genuine quote, approved by the customerOne to three sentences

Aim for 400 to 700 words with four to eight photos. Long enough to be convincing, short enough to read on a phone between other things.

Getting permission the right way

  1. Ask before the job ends

    Choose jobs where the customer is happy and the work is a good example. Ask whether they would mind you writing it up, and explain where it would appear.

  2. Agree what can be shown

    Photos, district name, property type, cost range and their quote are separate permissions. Some customers will agree to photos but not a quote, or a quote but not their first name.

  3. Send the draft

    Email the written case study and the photos you plan to use. Ask them to reply to approve or suggest changes.

  4. Keep the evidence

    Save the approval email and the customer's original words with the job record. Advertising rules require you to hold documentary evidence that a testimonial is genuine, along with contact details for the person who gave it[2].

  5. Be open about any incentive

    If you offered a discount or a gift for taking part, say so on the page. Regulators expect businesses that publish reviews to prevent concealed incentivised reviews[3].

Never edit a customer's words to make them sound more enthusiastic, and never combine two customers into one story. If you would not be comfortable with the customer reading your version, rewrite it.

Writing it so people finish it

Write the way you would explain the job to a friend's parent: plain words, short sentences, technical terms only when they help. 'We fitted a 30 kW combi' is fine if you add 'big enough to run a shower and the kitchen tap at the same time'. Use real measurements and timescales from your job sheet: days on site, number of radiators changed, how long the water was off.

Admit the snag. A case study where everything went perfectly reads like an advert. One where the old pipework turned out to be corroded, and you explained the extra work, priced it and finished a day late, reads like a business that can be trusted with problems.

Heat pump case studies and the numbers people compare

Heat pump buyers are often researching for months and will compare your story with published figures. Under the Boiler Upgrade Scheme, the median installed cost of an air-to-water heat pump was £12,826 in July to September 2026, and £34,630 for a ground source heat pump, including the grant[4]. The scheme gives £7,500 towards either in England and Wales[5].

Median installed cost under the Boiler Upgrade Scheme, July to September 2026Including the grant; England and Wales
Median installed cost under the Boiler Upgrade Scheme, July to September 2026Comparison. Air-to-water heat pump: £12,826; Ground source heat pump: £34,630.£12,826Air-to-water heat pumpAir-to-water heat pump: £12,826£34,630Ground source heat pumpGround source heat pump: £34,630Median installed cost under the Boiler Upgrade Scheme, July to September 2026Comparison. Air-to-water heat pump: £12,826; Ground source heat pump: £34,630.£12,826Air-to-water heat pumpAir-to-water heat pump: £12,826£34,630Ground source heat pumpGround source heat pump: £34,630

Source: Department for Energy Security and Net Zero, 2026[4]

Show the data
ItemValue
Air-to-water heat pump£12,826
Ground source heat pump£34,630

If the customer agrees to share their cost, give it as a range and explain what drove it: radiator upgrades, a new cylinder, pipework changes, groundworks or electrical work. If your job came in above the median, say why. If the customer does not want costs shown, describe the scope in enough detail that readers can compare like with like when they get your quote.

Worked example outline

Example: a fictional firm writes up a job in a three-bedroom 1960s semi. The home: two adults working from home, one bathroom, airing cupboard with an old cylinder. The problem: low hot water pressure upstairs and a 20-year-old regular boiler that needed frequent repairs. The options: like-for-like regular boiler, system boiler with an unvented cylinder, or a combi. The decision: system boiler and unvented cylinder, because two showers might run at once. The work: three days, heating off for one, a corroded section under the landing floor replaced. The result: strong showers, steady heating, a controls walk-through. In their words: a two-sentence quote the customers wrote and approved.

Where to publish and reuse

  • Your website: one page per case study, linked from the service page it relates to. This is the version search engines and customers find.
  • Quotes: attach a link to a similar case study when you send a quote for the same kind of job.
  • Social media: a carousel of the photos with the problem and result in two lines and a link to the full story.
  • Newsletters: one case study per issue gives existing customers something worth reading.
  • Leaflets: a single photo and three-line summary can make a door drop feel local and real.

For the photo side, see job photos that sell your work. For sending case studies to past customers, see email newsletters for a plumbing customer base.

Common mistakes

  • Writing about the product instead of the customer's problem.
  • Showing the street or house number in photos or text.
  • Using first names or quotes without written permission.
  • Leaving out the snag, which makes the story read like an advert.
  • Publishing and forgetting: refresh old case studies when products or rules change.

Frequently asked questions

How long should a plumbing case study be?

Around 400 to 700 words with four to eight photos is enough for most jobs. Long enough to show your decisions and how you handled problems, short enough to read on a phone.

Do I need the customer's permission to write a case study?

Yes. Get written permission for the story, each type of detail you include (photos, district, cost, quote) and keep the approval with the job record.

Can I offer a discount for a case study?

You can, but say so on the page. A concealed incentive behind a review or testimonial can mislead readers and breach consumer protection rules.

Should I include prices in case studies?

Only with the customer's agreement, and preferably as a range with an explanation of what drove the cost. Otherwise describe the scope in enough detail for readers to compare.

References

  1. Department for Business, Energy and Industrial Strategy (GOV.UK) (2021). Consumer protection study 2022: understanding the impacts and resolution of consumer problems (opens in a new tab) ↑

  2. Advertising Standards Authority / Committee of Advertising Practice (2026). The CAP Code, section 03: Misleading advertising (rules 3.7 and 3.47) (opens in a new tab) ↑

  3. Competition and Markets Authority (GOV.UK) (2025). Short guide for businesses: publishing consumer reviews and complying with consumer protection law (opens in a new tab) ↑

  4. Department for Energy Security and Net Zero (2026). Boiler Upgrade Scheme (BUS) monthly statistics: England and Wales, September 2026 (opens in a new tab) ↑

  5. GOV.UK (2026). Apply for the Boiler Upgrade Scheme: what you can get (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo